CMM1631-SM MIMIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

32dBm (Typ.) Saturated output power 26dB (Typ) Linear Gain Fully Matched Unconditionally Stable Low Cost, Surface Mount Package 6mmX6mmX1.6mm Optimum Thermal Dissipation 7V, 770mA Military Ku Band VSAT Point to Point Radio Ku-Band Space General Description The CMM1631-SM is a four stage pHEMT GaAs MMIC power amplifier packaged in a 6mm X6mm surface mount package. The CMM1631-SM provides 26dB of linear gain and delivers 1.5 watts of output power at saturation operating between 16 to 18GHz. The unconditional stability and internal matching provides for a reduction in external components making this product a simple and low cost solution. The true surface mount package makes it ideal solution in all manufacturing environments. The power amplifier is intended for use in the extended Ku-Band satellite applications. Maximum Ratings (TA = -40°C to +75°C) stinUpyTretemaraPstinUpyTretemaraP Drain Voltage (+Vdd) 8.5 Volts RF Input Power (P in) 13 dBm Gate Voltage (Vgg P( rewoP detapissiDstloV0.3-) diss) 5.6 Watts Quiescent Current (Idq) 1 A Storage Temperature -50 to +150 °C Gate Current (Ig C°57+ ot 04-erutarepmeT ediskcaB gnitarepOAm5) stinUxaMpyTniMnoitidnoCretemaraP zHG18.016.0egnaR ycneuqerF mBd31.5noisserpmoc Bd1 @ rewoP tuptuO mBd32.0 = 10 dBm niP rewoP tuptuO detarutaS Saturated Output Power Variation mBd0.15.0ycneuqerf gnitarepo revO Linear Gain 26.5 dB Bd0.30.1ycneuqerf gnitarepo revOnoitairaV niaG raeniL Input Reflection Coefficient -7.0 dB Bd0.7-tneiciffeoC noitcelfeR tuptuO stloV7.0-9.0-1.1- 800 mA = qdIegatloV ylppuS etaG A800 mAnoitarutaS tAtnerruC niarD %32noitarutaS tAycneiciffE deddA rewoP stinUxaMpyTniMnoitidnoCretemaraP mBd5.0-erutarepmeT mooR morf noitairaVrewoP tuptuO detarutaS Bd5.25.2-erutarepmeT mooR morf noitairaVniaG raeniL Stability Unconditionally stable Electrical Specifications (TA = -40°C to +75°C) Operation outside these limits can cause permanent damage.

Applications

Power Amplifier Measurements (7 V, 800 mA) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. 16.0-18.0 GHz 1.5-Watt Power Amplifier CMM1631-SM CMM1631-SM Small Signal 10 11 12 13 14 15 16 17 18 19 20 21 22 Freq (GHz) S21 (dB) -15 -13 -11 S11, S22 (dB) S21 S11 S22 CMM1631-SM P1dB Frequency (GHz) Pout (dBm) P1dB 7V CMM1631-SM Psat Frequency (GHz) Pout (dBm) Psat 7V CMM1631-SM Gain Freq (GHz) S21, S12 S21 CMM1631-SM Eff Frequency (GHz) Effeciency (%) Eff 7V

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. their obligation to be compliant with U.S. Export Laws. Pin Functional Diagram Vdd 1 GROUND 2 RF IN 3 GROUND 4 Vgg 5

10 Vdd

9 GROUND

8 RF OUT

7 GROUND

6 Vgg

Physical Dimensions (Bottom View) Vgg RF IN CMM1631-SM Vdd RF OUT F 1.0F 1.0 Vgg Vdd 5050 Recommended Application Circuit Note: This schematic represents the topology of the application circuit recommended by Celeritek. Note: Due to the high gain of this device it is highly recommended to maintain the reverse isolation (S12) above 50 dB. Biasing Notes 1. Dual bias is required 2. 0.1 F bypass capacitors are needed on PC board as close as possible to pins 1, 5, 6 and 10. 3. Positive (+) bias can be applied either at pin 1 or pin 6. 4. Negative (-) bias can be applied either at pin 5 or pin 6. 5. No DC block is required at RF IN/OUT. 6. Negative (-) bias must be applied before applying positive (+) bias.

Ordering Information

The CMM1631-SM is available in available in tube or tape and reel. Part Number for Ordering Package e in bulk quantitygakcap tnuom ecafruS Surface mount package in tape and reel Evaluation Board CMM1631-SM-0000 CMM1631-SM-000T PB-CMM1631-SM-0000 16.0-18.0 GHz 1.5-Watt Power Amplifier CMM1631-SM HOLE TABLE REF. A NONE DIA. .070 .010 TOL. +/-.0003 +/-.0003 QTY. 187 PLATING THRU THRU