CMF10120D CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • High Speed Switching with Low Capacitances
  • High Blocking Voltage with Low RDS(on)
  • Easy to Parallel and Simple to Drive
  • Avalanche Ruggedness
  • Resistant to Latch-Up
  • Halogen Free, RoHS Compliant Benefits
  • Higher System Efficiency
  • Reduced Cooling Requirements
  • Increased System Switching Frequency

Applications

  • Solar Inverters
  • High Voltage DC/DC Converters
  • Motor Drives
  • Switch Mode Power Supplies Package TO-247-3 Maximum Ratings (TC = 25˚C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note ID Continuous Drain Current A VGS@20V, TC = 25˚C Fig. 10

13 VGS@20V, TC = 100˚C

IDpulse Pulsed Drain Current 49 A Pulse width tP limited by Tjmax TC = 25˚C EAS Single Pulse Avalanche Energy 1.2 J ID = 10A, VDD = 50 V, L = 20 mH tAR limited by Tjmax Fig. 15 EAR Repetitive Avalanche Energy 0.8 J IAR Repetitive Avalanche Current 10 A ID = 10A, VDD = 50 V, L = 15 mH tAR limited by Tjmax VGS Gate Source Voltage -5/+25 V Ptot Power Dissipation 134 W TC=25˚C Fig. 9 TJ , Tstg Operating Junction and Storage Temperature -55 to +135 ˚C TL Solder Temperature 260 ˚C 1.6mm (0.063”) from case for 10s Md Mounting Torque 1 8.8 Nm lbf-in M3 or 6-32 screw VDS = 1200 V ID(MAX) = 24 A RDS(on) = 160mΩ Part Number Package CMF10120D TO-247-3

CMF10120D Rev. A Electrical Characteristics (TC = 25˚C unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Test Conditions Note V(BR)DSS Drain-Source Breakdown Voltage 1200 V VGS = 0V, ID = 50μA VGS(th) Gate Threshold Voltage 2.4 3.5 V VDS = VGS, ID = 0.5 mA Fig. 11 3.1 4.1 VDS = VGS, ID = 1.0 mA 1.8 V VDS = VGS, ID = 0.5 mA, TJ = 135ºC 2.3 V VDS = VGS, ID = 1.0 mA, TJ = 135ºC IDSS Zero Gate Voltage Drain Current 0.5 50 μA VDS = 1200V, VGS = 0V 5 150 VDS = 1200V, VGS = 0V, TJ = 135ºC IGSS Gate-Source Leakage Current 0.25 μA VGS = 20V, VDS = 0V RDS(on) Drain-Source On-State Resistance 160 200 mΩ VGS = 20V, ID = 10A Fig. 3 190 240 VGS = 20V, ID = 10A, TJ = 135ºC gfs Transconductance 4.2 S VDS= 20V, IDS= 10A Fig. 6

3.9 VDS= 20V, IDS= 10A, TJ = 135ºC

Ciss Input Capacitance 928 pF VGS = 0V VDS = 800V f = 1MHz VAC = 25mV Fig. 13Coss Output Capacitance 63 Crss Reverse Transfer Capacitance 7.5 Eoss Coss Stored Energy 32 μJ Fig 14 td(on)v Turn-On Delay Time 8.8 ns VDD = 800V, VGS = 0/20V ID = 10A RG(ext) = 2.5Ω, RL = 40Ω Timing relative to VDS fig. 17 tfv Fall Time 21 td(off)V Turn-Off Delay Time 38 trV Rise Time 34 RG Internal Gate Resistance 13.6 Ω f = 1MHz, VAC = 25mV Built-in SiC Body Diode Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note VSD Diode Forward Voltage 3.5 V VGS = -5V, IF=5A, TJ = 25ºC

3.1 VGS = -2V, IF=5A, TJ = 25ºC

trr Reverse Recovery Time 138 ns VGS = -5V, IF=10A, TJ = 25ºC VR = 800V, diF/dt= 100A/μs Fig. 22Qrr Reverse Recovery Charge 94 nC Irrm Peak Reverse Recovery Current 1.57 A Thermal Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note RθJC Thermal Resistance from Junction to Case 0.66 0.82 K/W Fig. 7RθCS Case to Sink, w/ Thermal Compound 0.25 RθJA Thermal Resistance From Junction to Ambient 40 Gate Charge Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note Qgs Gate to Source Charge 11.8 nC VDD = 800V, VGS = 0/20V ID =10A Per JEDEC24 pg 27 Fig.12Qgd Gate to Drain Charge 21.5 Qg Gate Charge Total 47.1

CMF10120D Rev. A 10% Irr Vcc trr Irr Ic Vpk tx 10% Vcc Qrr=∫ trr id dt tx Diode Reverse Recovery Energy Diode Recovery Waveforms Erec=∫ id dt t1 t2 Test Circuit Diagrams and Waveforms 800V 42.3μf 856μH CMF10120D CMF10120D Fig 22. Body Diode Recovery Test Fig 23. Body Diode Recovery Waveform FOR OFFICIAL USE ONLY – Not Cleared for Open Release FOR OFFICIAL USE ONLY – Not Cleared for Open Release EA = 1/2L x ID Fig 24. Unclamped Inductive Switching Test Circuit Fig 25. Unclamped Inductive Switching waveform for Avalanche Energy ESD Test Total Devices Sampled Resulting Classification ESD-HBM All Devices Passed 1000V 2 (>2000V) ESD-MM All Devices Passed 400V C (>400V) ESD-CDM All Devices Passed 1000V IV (>1000V) ESD Ratings

This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright © 2010-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks and Z-REC and Z-FET are trademarks of Cree, Inc.8 CMF10120D Rev. A Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power “The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Recommended Solder Pad Layout Package Dimensions Package TO-247-3 POS Inches Millimeters Min Max Min Max A .605 .635 15.367 16.130 B .800 .831 20.320 21.10 C .780 .800 19.810 20.320 D .095 .133 2.413 3.380 E .046 .052 1.168 1.321 F .060 .095 1.524 2.410 G .215 TYP 5.460 TYP H .175 .205 4.450 5.210 J .075 .085 1.910 2.160 K 6˚ 21˚ 6˚ 21˚ L 4˚ 6˚ 4˚ 6˚ M 2˚ 4˚ 2˚ 4˚ N 2˚ 4˚ 2˚ 4˚ P .090 .100 2.286 2.540 Q .020 .030 .508 .762 R 9˚ 11˚ 9˚ 11˚ S 9˚ 11˚ 9˚ 11˚ T 2˚ 8˚ 2˚ 8˚ U 2˚ 8˚ 2˚ 8˚ V .137 .144 3.487 3.658 W .210 .248 5.334 6.300 X .502 .557 12.751 14.150 Y .637 .695 16.180 17.653 Z .038 .052 0.964 1.321 AA .110 .140 2.794 3.556 BB .030 .046 0.766 1.168 CC .161 .176 4.100 4.472 W X Y Z AA BB CC TO-247-3 “The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006.” (1) (2) (3) Part Number Package Marking CMF10120D TO-247-3 CMF10120

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: CMF10120D