CM2500

CM2500 MULTICOMP | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Single Phase Bridge Rectifiers Page <1> 14/04/11 V1.1 Features:

• • Metal case for maximum heat dissipation.
• • Surge overload ratings to 400 amperes. Diameters : Inches (Millimetres) CM Series

Single Phase Bridge Rectifiers Page <2> 14/04/11 V1.1 Maximum Rating and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter CM2500 CM2501 CM2502 CM2504 CM2506 CM2508 CM25010 Unit Maximum recurrent peak reverse voltage 50 100 200 400 600 800 1000 VMaximum RMS bridge input voltage 35 70 140 280 420 560 700 Maximum DC blocking voltage 50 100 200 400 600 800 1000 Maximum average forward current at TA = 55°C 25 A Non-repetitive peak forward surge current, rated load 300 Maximum forward voltage per bridge element specified current at 12.5A 1.2 V Maximum reverse current at rated DC blocking voltage per element 10 µA I2t rating for fusing (t <8.35ms) 374 A2S Typical thermal resistance RθJC 2.5 °C/W Operating temperature range TJ -55 to +150 °C Storage temperature range TA Note : * Unit mounted on metal heat-sink. Mechanical Data : Case : Metal. Mounting position : Any.

Single Phase Bridge Rectifiers Page <3> 14/04/11 V1.1 Output Current VS. Ambient Temperature Resistive or Inductive Load Bridge Mounted on 8 x 8 inches Aluminium Plate 25 inches Thick Power Dissipation VS. Average Output Current Resistive or Inductive Load TJ = 150°C Ratings and Characteristic Curves Output Current VS. Case Temperature Resistive Or Inductive Load TJ = 150°C Typical Instantaneous Forward Characteristics at TJ = 25°C

Single Phase Bridge Rectifiers Page <4> 14/04/11 V1.1 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011. Specifications Current Rating (A) VRRM (V) Maximum AC Input Voltage (V) Part Number 50 35 CM2500 100 70 CM2501 200 140 CM2502 400 280 CM2504 600 420 CM2506 800 500 CM2508 1000 800 CM25010