CLYBB-DXG-XHHKKMN4

CLYBB-FKA CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

CLD-CT1411.004 PRODUCT FAMILY DATA SHEET Cree® PLCC6 3 in 1 SMD LED CLYBB-FKA WWW.CREE.COM/HB Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for outdoor and full color video signage applications. The encapsulation resin contains UV inhibitors to minimize the effects of long-term exposure to direct sunlight, resulting in stable light output over the life of the LED. This PLCC6 package has an increased package height to ease in the manufacturing process.

FEATURES

• Size (mm):2.8x2.8x2.3
• Dominant Wavelength: Red (619 - 624nm) Green (520 - 535nm) Blue (465 - 475nm)
• Luminous Intensity (mcd) Red (280 - 560) Green (560 - 1120) Blue (101 - 202)
• Water-Resistant (IPx8)*
• Moisture Sensitivity Level: 5a
• Lead-Free
• RoHS Compliant Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300

APPLICATIONS

• Outdoor Full-Color Video Screen
• Decorative lighting
• Amusement *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. The leads area of the LED is not IPx8 rated and it’s required to insulate for moisture by customer in outdoor application.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 50 35 20 mA Peak Forward Current Note 2 IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 119 72 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 440 480 420 °C/W Junction/solder point 1 chip on RTHJS 180 230 200 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD 1000 V Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit R G B Dominant Wavelength IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) λDOM 619~624 520~535 465~475 nm Spectral bandwidth at 50% IREL max IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) Δ λ 24 38 28 nm Forward Voltage IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) VF(avg) 2.1 2.7 2.8 V VF(max) 2.6 3.4 3.6 V Luminous Intensity IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) IV(min) 280 560 101 mcd IV(avg) 420 730 135 mcd Luminous Intensity(Reference) IF = 20 mA(R/G/B) IV(avg) 550 1220 245 mcd Reverse Current (max) VR = 5 V IR 10 10 10 μA Note: Continuous reverse voltage can cause LED damage.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA Tolerance of measurement of luminous intensity is ±10%. Tolerance of measurement of dominant wavelength is ±1 nm. Red Bin Code Min.(nm) Max.(nm) RB 619 624 Green Bin Code Min.(nm) Max.(nm) G7 520 525 G23 522.5 527.5 G8 525 530 G45 527.5 532.5 G9 530 535 Blue Bin Code Min.(nm) Max.(nm) B4 465 470 B45 467.5 472.5 B5 470 475 Red Bin Code Min.(mcd) Max.(mcd) G 280 355 fg 318 403 H 355 450 hj 403 505 J 450 560 Green Bin Code Min.(mcd) Max.(mcd) K 560 710 np 635 805 M 710 900 qr 805 1010 N 900 1120 Blue Bin Code Min.(mcd) Max.(mcd) 56 101 126 C 112 140 78 126 160 D 140 180 9a 160 202 INTENSITY BIN LIMIT (RED I F = 15 mA, GREEN I F = 10 mA, BLUE IF = 10 mA) COLOR BIN LIMIT (RED I F = 15 mA, GREEN I F = 10 mA, BLUE IF = 10 mA)

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA ORDER CODE TABLE* Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Pack- ageMin. Max. Color Bin Min. (nm) Color Bin Max. (nm) CLYBB-FKA-CGJKN569aBB79453 Red 280 560 RB 619 RB 624 Reel Green 560 1120 G7 520 G9 535 Reel Blue 101 202 B4 465 B5 475 Reel CLYBB-FKA-CG1K1561BB7C4S3 Red Any 1 Intensity bin from G(280) - J(560) RB 619 RB 624 Reel Green Any 1 Intensity bin from K(560) - N(1120) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from 56(101) - 9a(202) Any 1 hue bin from B4(465) - B5(475) Reel CLYBB-FKA-CH1np1C1BB7C4S3 Red Any 1 Intensity bin from H(355) - J(560) RB 619 RB 624 Reel Green Any 1 Intensity bin from np(635) - N(1120) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from C(112) - 9a(202) Any 1 hue bin from B4(465) - B5(475) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, any 1 intensity bin from K - N means only 1 intensity bin (K or np or M or qr or N) will be shipped by Cree. For example, any 1 color bin from G7 - G9 means only 1 color bin (G7 or G23 or G8 or G45 or G9) will be shipped by Cree. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other- wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man- ner:

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA REFLOW SOLDERING

• The CLYBB-FKA is rated as a MSL 5a product.
• The recommended floor life out of bag is 24hrs.
• The temperature profile is as below. Use only with CLYBB-FKA Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 235ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 45s max Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5  Recommended solder pad design for heat dissipation (4-pin SMD LED) Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA NOTES

• The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
• To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary: Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD  For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current  Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED.  Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED.  All devices, equipment and machinery must be properly grounded.  It is recommended to perform electrical test to screen out ESD failures at final inspection.  It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBB-FKA

• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 6500 pcs per reel. PACKAGING  C oba lt Fr eeC oba lt Fr eeC oba lt Fr eeC oba lt Fr ee AAAA CCCC