CLYBA-FKA CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
CLD-CT1337.004 PRODUCT FAMILY DATA SHEET Cree® PLCC6 3 in 1 SMD LED CLYBA-FKA WWW.CREE.COM/HB Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for outdoor and full color video signage applications. The encapsulation resin contains UV inhibitors to minimize the effects of long-term exposure to direct sunlight, resulting in stable light output over the life of the LED. This PLCC6 package has an increased package height to ease in the manufacturing process.
FEATURES
- Size (mm):2.8x2.8x2.5
- Dominant Wavelength: Red (619 - 624nm) Green (520 - 540nm) Blue (460 - 480nm)
- Luminous Intensity (mcd) Red (224 - 450) Green (355 - 710) Blue (45 - 112)
- Water-Resistant (IPx8)*
- Moisture Sensitivity Level: 5a
- Lead-Free
- RoHS Compliant Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300
APPLICATIONS
- Outdoor Full-Color Video Screen
- Decorative lighting
- Amusement *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 50 35 20 mA Peak Forward Current Note 2 IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 119 76 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient RTHJA 440 480 420 °C/W Junction/solder point RTHJS 180 230 200 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD 1000 V Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Values Unit R G B Dominant Wavelength IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) λDOM 619~624 520~540 460~480 nm Spectral bandwidth at 50% IREL max IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) Δ λ 24 38 28 nm Forward Voltage IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) VF(avg) 2.1 2.7 3.0 V VF(max) 2.6 3.4 3.8 V Luminous Intensity IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) IV(min) 224 355 45 mcd IV(avg) 320 530 85 mcd Luminous Intensity(Reference) IF = 20 mA(R/G/B) IV(avg) 420 890 155 mcd Reverse Current (max) VR = 5 V IR 10 10 10 μA
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA Tolerance of measurement of luminous intensity is ±10%. Tolerance of measurement of dominant wavelength is ±1 nm. Red Bin Code Min.(nm) Max.(nm) RB 619 624 Green Bin Code Min.(nm) Max.(nm) G7 520 525 G23 522.5 527.5 G8 525 530 G45 527.5 532.5 G9 530 535 G67 532.5 537.5 Ga 535 540 Blue Bin Code Min.(nm) Max.(nm) B3 460 465 B23 462.5 467.5 B4 465 470 B45 467.5 472.5 B5 470 475 B67 472.5 477.5 B6 475 480 Red Bin Code Min.(mcd) Max.(mcd) F 224 280 de 252 318 G 280 355 fg 318 403 H 355 450 Green Bin Code Min.(mcd) Max.(mcd) H 355 450 hj 403 505 J 450 560 km 505 635 K 560 710 Blue Bin Code Min.(mcd) Max.(mcd) L9 45 56 3e3d 51 64 L 56 71 3c3b 64 81 A 71 90 3a4 81 101 B 90 112 INTENSITY BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA) COLOR BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA ORDER CODE TABLE* Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Pack- ageMin. Max. Color Bin Min. (nm) Color Bin Max. (nm) CLYBA-FKA-CFHHKL9BBB7a363 Red 224 450 RB 619 RB 624 Reel Green 355 710 G7 520 Ga 540 Reel Blue 45 112 B3 460 B6 480 Reel CLYBA-FKA-CF1H1L91BB7D3D3 Red Any 1 Intensity bin from F(224) - H(450) RB 619 RB 624 Reel Green Any 1 Intensity bin from H(355) - K(710) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from L9(45) - B(112) Any 1 hue bin from B3(460) - B6(480) Reel CLYBA-FKA-Cde1J1L1BB7D3D3 Red Any 1 Intensity bin from de(252) - H(450) RB 619 RB 624 Reel Green Any 1 Intensity bin from J(450) - K(710) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from L(56) - B(112) Any 1 hue bin from B3(460) - B6(480) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, any 1 intensity bin from H - K means only 1 intensity bin (H or hj or J or km or K) will be shipped by Cree. For example, any 1 color bin from G7 - Ga means only 1 color bin (G7 or G23 or G8 or G45 or G9 or Ga) will be shipped by Cree. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other- wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man- ner:
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA REFLOW SOLDERING
- The CLYBA-FKA is rated as a MSL 5a product.
- The recommended floor life out of bag is 24hrs.
- The best practices suggestion is to bake 24-hour/80ºC before use.
- The temperature profile is as below. Use only with CLYBA-FKA Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 250ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 60s max Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5 Recommended solder pad design for heat dissipation (4-pin SMD LED)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLYBA-FKA
- The boxes are not water resistant and they must be kept away from water and moisture.
- The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
- Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
- The reel pack is applied in SMD LED.
- Max 6500 pcs per reel. PACKAGING C oba lt Fr eeC oba lt Fr eeC oba lt Fr eeC oba lt Fr ee AAAA CCCC