CLX6F-AKB CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

CLD-CT1391.004 PRODUCT FAMILY DATA SHEET Cree® PLCC6 3 in 1 SMD LED CLX6F-AKB WWW.CREE.COM/HB Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

FEATURES

  • Size (mm):3.5 x 3.4 x 2.8
  • Dominant Wavelength: Amber (587.5 - 597.5nm)
  • Luminous Intensity (mcd) Amber (3550-7100)
  • Water-Resistant (IPX8)*
  • Moisture Sensitivity Level: 5a
  • Lead-Free
  • RoHS Compliant
  • Matte Surface Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300

APPLICATIONS

  • Architecture Lighting
  • Channel Letter
  • Backlight PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high reliability and high brightness LEDs are designed to work in a wide range of environmental condition and are ideally suited for use in illumination applications. Its wide viewing angle makes these LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. The leads area of the LED is not IPx8 rated and it’s required to insulate for moisture by customer in outdoor application.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current Note 1 IF 3 x 70 mA Peak Forward Current Note 2 IFP 3 x 200 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 196 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/ambient 1 chip on RTHJA 270 °C/W Junction/solder point 1 chip on RTHJS 160 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD 1000 V Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit Dominant Wavelength IF = 3 x 50 mA λDOM 587.5-597.5 nm Spectral bandwidth at 50% IREL max IF = 3 x 50 mA Δ λ 24 nm Forward Voltage IF = 3 x 50 mA VF(avg) 2.2 V VF(max) 2.8 V Luminous Intensity IF = 3 x 50 mA IV(min) 3550 mcd IV(avg) 4700 mcd Luminous Flux(Reference) IF = 3 x 50 mA ΦV(avg) 14.1 lm Reverse Current (max) VR = 5 V IR 10 μA Note: Continuous reverse voltage can cause LED damage.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB COLOR BIN LIMIT (I F = 3 X 50 mA) Tolerance of measurement of dominant wavelength is ±1 nm. Amber Bin Code Min.(nm) Max.(nm) AF 587.5 592.5 AG 590 595 AH 592.5 597.5 Amber Bin Code Min.(mcd) Max.(mcd) U 3550 4500 1f1g 4025 5020 V 4500 5600 1h1j 5020 6300 W 5600 7100 INTENSITY BIN LIMIT (I F = 3 X 50 mA) Tolerance of measurement of luminous intensity is ±10%.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB ORDER CODE TABLE* Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Package Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) CLX6F-AKB-CUWFH3 Amber 3550 7100 AF 587.5 AH 597.5 Reel CLX6F-AKB-CU1FS3 Amber Any 1 Intensity bin from U(3550) - W(7100) Any 1 hue bin from AF(587.5) - AH(597.5) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes.Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, intensity bin from U - W means intensity bin from (U or 1f1g or V or 1h1j or 1W) will be shipped by Cree. For example, FH means color bin AF&AG&AH will be shipped by Cree. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. ℃ ℃

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other- wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. （ ） （ ） （ ） （ ） （ ） （ ）

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man- ner:

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB REFLOW SOLDERING

  • The CLX6F-AKB is rated as a MSL 5a product.
  • The recommended floor life out of bag is 24hrs.
  • The temperature profile is as below. Use only with CLX6F-AKB Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 250ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 60s max Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5  Recommended solder pad design for heat dissipation (4-pin SMD LED) Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB NOTES

  • The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
  • To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary: Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD  For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current  Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED.  Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED.  All devices, equipment and machinery must be properly grounded.  It is recommended to perform electrical test to screen out ESD failures at final inspection.  It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLX6F-AKB

  • The boxes are not water resistant and they must be kept away from water and moisture.
  • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
  • Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
  • The reel pack is applied in SMD LED.
  • Max 2800 pcs per reel. PACKAGING