CLSP MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: CLSP CLSP SPECIFICATIONS ES-9237 Rev.8 Page 1/2 http://www.m-system.co.jp/ CLAMP-ON PULSE SENSOR Functions & Features
- Indirectly detects pulse signals counted at a watt-hour meter
- Provides the watt-hour meter pulse signals to a PLC or a demand monitor equipment
- No polarity input
- Open collector output MODEL: CLSP–5
ORDERING INFORMATION
- Code number: CLSP-5 INPUT 5: Max. 50 000 pulses/hour CAUTION Before you remove the module or mount it, turn off the power supply and input signal for safety.
RELATED PRODUCTS
- Pulse isolator (model: YPD, WYPD, KYPD, KWYPD, M2PP, W2PP)
- Low speed totalized pulse input module (model: R3-PA4B) GENERAL SPECIFICATIONS Construction: Clamp Connection: M3 screw terminals (torque 0.5 N·m) Recommended solderless terminal: - Solderless terminals with insulation sleeve is not available. - Refer to the drawing on the end of this section. Applicable wire size: 0.3 to 0.75 mm2 Housing material: Flame-resistant resin (black) Detachable number of times: Approx. 100 times ■Recommended solderless terminal size - M3 (unit: mm) 12max 6max 3max 4min 3.2 dia. (mm) INPUT SPECIFICATIONS Input: Max. 50 000 pulses/hour Pulse current: ≥ ±6 mA, ≤ ±40 mA (DC) Pulse width: ≥ 10 msec. Pulse cycle: ≥ 20 msec. Rise/sink time: ≤ 2 msec. OUTPUT SPECIFICATIONS ■ Open collector Output rating: ≤ 35 V DC, ≤ 20 mA Saturation voltage: ≤ 1.3 V DC @ 2 mA Output pulse: Max. 50 000 pulses/hour INSTALLATION Power input
- DC: Operational voltage range 12 V DC ±10 %; ripple 10 %p-p max., 5 mA max. Operating temperature: 0 to 55°C (32 to 131°F) Operating humidity: 80 % RH max. (non-condensing) Mounting: Surface Weight: 55 g (1.9 oz)
MODEL: CLSP CLSP SPECIFICATIONS ES-9237 Rev.8 Page 2/2 http://www.m-system.co.jp/ CONNECTION DIAGRAM 12V R0 CLSP PULSE INPUT POWER SUPPLY PULSE OUTPUT EXTERNAL DIMENSIONS mm (inch) 49.1 (1.93) 33 (1.30) 39 (1.54) 34 (1.34) 28 (1.10) 22 (.87) 2–3.5 dia. MTG HOLE (.55)79 (3.11) 5 (.20) dia. 3–M3 SCREW TERMINAL COVER 12V Specifications are subject to change without notice.