CLS6B-DXA-XHHJJKKLLMMNN4

CLS6B-FKW CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

CLD-CT1475.001 PRODUCT FAMILY DATA SHEET Cree® PLCC6 3 in 1 SMD LED CLS6B-FKW WWW.CREE.COM/HB Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for indoor signage applications.

FEATURES

• Size (mm): 4.7 x 1.5 X1.3
• Dominant Wavelength (nm): Red:(619-624) Green:(520-535) Blue:(462.5-475)
• Luminous Intensity (mcd) Red (560 - 1120) Green (1120 - 2240) Blue (252 - 505)
• Moisture Sensitivity Level: 3
• Lead-Free
• RoHS Compliant Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300

APPLICATIONS

• Full-Color Video Screen
• Decorative lighting
• Amusement Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 30 20 20 mA Peak Forward Current Note 2 IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 78 76 76 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 360 475 450 °C/W Junction/solder point 1 chip on RTHJS 200 330 300 °C/W Junction/ambient 3 chip on RTHJA 510 675 690 °C/W Junction/solder point 3 chip on RTHJS 280 470 420 °C/W Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit R G B Dominant Wavelength IF = 20 mA λDOM 619~624 520~535 462.5~475 nm Spectral bandwidth at 50% IREL max IF = 20 mA Δ λ 16 30 22 nm Forward Voltage IF = 20 mA VF(avg) 2.1 3.1 3.1 V VF(max) 2.6 3.8 3.8 V Luminous Intensity IF = 20 mA IV(min) 560 1120 252 mcd IV(avg) 770 1500 350 mcd Reverse Current (max) VR = 5 V IR 10 10 10 μA Note: Continuous reverse voltage can cause LED damage.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. INTENSITY BIN LIMIT (I F = 20mA) COLOR BIN LIMIT (I F = 20mA) Red Bin Code Min.(mcd) Max.(mcd) K 560 710 np 635 805 M 710 900 qr 805 1010 N 900 1120 Green Bin Code Min.(mcd) Max.(mcd) P 1120 1400 vw 1260 1600 Q 1400 1800 xy 1600 2020 R 1800 2240 Blue Bin Code Min.(mcd) Max.(mcd) de 252 318 G 280 355 fg 318 403 H 355 450 hj 403 505 Tolerance of measurement of luminous intensity is ±10%. Red Bin Code Min.(nm) Max.(nm) RB 619 624 Green Bin Code Min.(nm) Max.(nm) G7 520 525 G23 522.5 527.5 G8 525 530 G45 527.5 532.5 G9 530 535 Blue Bin Code Min.(nm) Max.(nm) B23 462.5 467.5 B4 465 470 B45 467.5 472.5 B5 470 475 Tolerance of measurement of dominant wavelength is ±1 nm.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. ORDER CODE TABLE* Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Pack- ageMin. Max. Color Bin Min. (nm) Color Bin Max. (nm) CLS6B-FKW-CKNPRdehjBB792353 Red 560 1120 RB 619 RB 624 Reel Green 1120 2240 G7 520 G9 535 Reel Blue 252 505 B23 462.5 B5 475 Reel CLS6B-FKW-CK1P1de1BB7C23R3 Red Any 1 intensity bin from K(560)-N(1120) RB 619 RB 624 Reel Green Any 1 intensity bin from P(1120)-R(2240) Any 1 hue bin from G7(520)-G9(535) Reel Blue Any 1 intensity bin from de(252)-hj(505) Any 1 hue bin from B23(462.5)-B5(475) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, any 1 intensity bin from P - R means only 1 intensity bin (P or vw or Q or xy or R) will be shipped by Cree. For example, any 1 color bin from G7 - G9 means only 1 color bin (G7 or G23 or G8 or G45 or G9)will be shipped by Cree. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CAUTIONS 1. Cleaning

• When necessary, cleaning should occur only with isopropyl alcohol (IPA) at room temperature (25ºC) for a duration of no more than one minute. Dry at room temperature for 15 minutes before use.
• The influence of ultrasonic cleaning on the SMD LED depends on factors such as ultrasonic power and the way the SMD LEDs are mounted. Ultrasonic cleaning should be pre-qualified to ensure this will not cause damage to the SMD LEDs. 2. Moisture-Proof Packing
• To prevent moisture absorption into SMD LEDs during the transportation and storage, the LEDs are packed in a mois- ture-barrier bag. Desiccants and a humidity indicator are packed together with the LEDs as secondary protection.
• A humidity-indicator card inside the packing indicates the humidity level. 3. Storage
• The shelf life of LEDs stored in the original sealed bag at <40ºC and <90%RH is 12 months. Baking is required if the shelf life has expired.
• Before openning the packaging, check for air leaks in the bag.
• After the bag is opened, the SMD LEDs must be stored at < 30ºC and < 60% RH. Under these conditions, SMD LEDs must be used (subject to reflow) within 168 hours. If the LEDs are not within 168 hours after removal from the bag, baking is required.
• To bake, place the SMD LEDs in an oven at 80ºC ±5ºC and relative humidity ≤10% RH for 24 hours.
• Take the material out of the packaging bag before baking. Do not open the oven door frequently during the baking process. 4. Soldering a. Manual Soldering with a Soldering Iron
• Use of a soldering iron of less than 25 watts is recommended. The iron temperature must be kept below 315ºC and soldering time no more than 2 seconds.
• The epoxy resin of an SMD LED should not contact the tip of the soldering iron.
• No mechanical stress should be exerted on the resin portion of an SMD LED during soldering.
• Handling of an SMD LED should be done only when the package has been cooled down to below 40ºC or less. This is to prevent SMD LED failures due to thermal-mechanical stress during handling.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. b. Reflow Soldering Temperature (top surface of the SMD LED) profile: Notes:

• SMD LEDs should not be modified after soldering. If modification cannot be avoided, the modifications must be pre- qualified to avoid damaging the SMD LEDs.
• In case of 2 times reflow process, 2nd reflow process must be performed as soon as possible after the 1st reflow.
• No stress should be exerted on the package during soldering.
• The PCB should not be wrapped after soldering; allow the PCB board and SMD LED to cool naturally.  Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. NOTES

• The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
• To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary: Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD  For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current  Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED.  Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED.  All devices, equipment and machinery must be properly grounded.  It is recommended to perform electrical test to screen out ESD failures at final inspection.  It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other- wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Tolerance of measurement of the dimension is ±0.1

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man- ner:

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree PLCC6 3 in 1 SMD LED CLS6B-FKW Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. PACKAGING

• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 3000 pcs per reel.  C o ba lt Fr eeC o ba lt Fr eeC o ba lt Fr eeC o ba lt Fr ee AAAAvoidvoidvoidvoid M M M M etaletaletaletal CCCContactontactontactontact