CLS15-22C-L213R-TR8 EVERLIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

․ Surface-mount plastic package ․ High sensitivity for Red, Green, and Blue light source CLS15-22C/L213 R/TR8 (λp= 620nm, Red) CLS15-22C/L213 G/TR8 (λp= 550nm, Green) CLS15-22C/L213 B/TR8 (λp= 470nm, Blue) ․ Good stable analog output with temperature shift ․ Size: 3.2mm (L)*2.7mm (W)*1.1mm (H) ․ Operating temperature performance, -40 oC to 85 oC ․ Active area: 1.8 mm 2 ․ RoHS compliant and Pb free package Descriptions CLS15-22C/L213/TR8 series color sensor device is one channel Si photodiode sensitivity to Red, Green and Blue region spectrum in miniature SMD package. Everlight color sensor series product is the good effective and low cost solution to white color balance, color detection and color management applications.

Applications

․ Color adjustment for LED back light system ․ Color adjustment for LED projector ․ Color detection ․ White balance adjustment ․ Consumer and mobile appliances

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 2 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Package Dimensions Anode Cathode Unit: mm Tolerances: ± 0.1mm

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 3 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Condition Rating Units Reverse Breakdown Voltage V BR I R = 100 µA 35 V Forward Voltage V F I F = 10mA 0.5~1.3 V Operating Temperature T opr － -40 ~ +85 °C Storage Temperature T stg － -40 ~ +85 °C Soldering Temperature [Note] Tsol － 260 °C Note: Soldering time ≦ 5 seconds Electro-Optical Characteristics (Ta=25°C) Red Color Sensor: CLS15-22C/L213R/TR8 Parameter Symbol Condition MIN. TYP. MAX. Unit Peak Sensitivity Wavelength λP － － 620 － nm Short-Circuit Current I SC Ee=100Lux VR=0V [Note] － 0.086 － µA IL1 Ee=100Lux VR=5V [Note] － 0.091 － µA Reverse Light Current IL2 Ee=1000Lux VR=5V [Note] － 0.83 － µA Reverse Dark Current I D Ee=0 VR = 10 V － 2 10 nA Photo sensitivity S Red (λP=630nm) － 0.21 － A/W Note: White Fluorescent light (Color Temperature = 6500K) is used as light source

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 4 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Green Color Sensor: CLS15-22C/L213G/TR8 Parameter Symbol Condition MIN. TYP. MAX. Unit Peak Sensitivity Wavelength λP － － 550 － nm Short-Circuit Current I SC Ee=100Lux VR=0V [Note] － 0.075 － µA IL1 Ee=100Lux VR=5V [Note] － 0.082 － µA Reverse Light Current IL2 Ee=1000Lux VR=5V [Note] － 0.72 － µA Reverse Dark Current I D Ee=0 Lux VR = 10 V － 2 10 nA Photo sensitivity S Green λP=520nm) － 0.18 － A/W Note: White Fluorescent light (Color Temperature = 6500K) is used as light source Blue Color Sensor: CLS15-22C/L213B/TR8 Parameter Symbol Condition MIN. TYP. MAX. Unit Peak Sensitivity Wavelength λP － － 470 － nm Short-Circuit Current I SC Ee=100Lux VR=0V [Note] － 0.042 － µA IL1 Ee =100Lux VR=5V [Note] － 0.046 － µA Reverse Light Current IL2 Ee =1000Lux VR=5V [Note] － 0.39 － µA Reverse Dark Current I D V R = 10 V － 2 10 nA Photo sensitivity S Blue λP=465nm) － 0.09 － A/W Note: White Fluorescent light (Color Temperature = 6500K) is used as light source

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 5 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 1 10 100 1000 10000 1E-4 1E-3 0.01 0.1 VR=5V ; Ta=25 o C CLS15-22C/L213R CLS15-22C/L213G CLS15-22C/L213B Ouput Current (mA) Illuminance (Lux) 1 2 3 4 5 6 7 0.00 0.05 0.10 0.15 0.20 White Fluorescent light Ev = 100Lux Average light current (uA) Voltage (V) CLS 15-22C/L213R/TR8 CLS 15-22C/L213G/TR8 CLS 15-22C/L213B/TR8 -60 -40 -20 0 20 40 60 80 100 0.01 0.1 100 1000 VR = 10 V EV = 0 LUX CLS15-22C/L123B/TR8 CLS15-22C/L123G/TR8 CLS15-22C/L123R/TR8 Average dark current (nA) Temperature ( )℃℃ ℃℃ -60 -40 -20 0 20 40 60 80 100 0.01 0.1 Ev = 100Lux Average light current (uA) Temperature ( )℃℃ ℃℃ CLS 15-22C/L213R/TR8 CLS 15-22C/L213G/TR8 CLS 15-22C/L213B/TR8 Typical Electro-Optical Characteristics Curves Fig.1 Dark Current vs. Temperature Fig.2 Light current vs. Illuminance (typ.) (typ.) Fig.3 Light current vs. Voltage Fig.4 Light current vs. Temperature (typ.) (typ.) Fig.5 Spectral Response (Blue region) Fig.6 Spectral Response (Green region) (typ.) (typ.)

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 6 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Fig.7 Spectral Response (Red region) (typ.)

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 7 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Recommended method of storage Reflow Terms: JEDEC Level 4 Specification Dry box storage is recommended as soon as the aluminum bag has been opened prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: /circle7 Storage temperature 10 ℃ to 30 ℃ /circle7 Storage humidity ≦ 60%RH max After more than 72 hours under these conditions moisture content will be too high for Reflow soldering. In case of moisture absorption, the devices will recover to former condition by drying under the following condition: 192 hours at 40 ℃ +5 ℃ /-0℃ and 5%RH (dry air / nitrogen), or 96 hours at 60 ℃ +5 ℃ and < 5%RH for all device containers, or 24 hours at 125 ℃ +5 ℃ not suitable for reel or tubes ESD Precaution: Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing. Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 8 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing.

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 9 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 xxxxxx xxxxxx xxxxxxxxxxxx xxxx xxxxxxxx RoHS Packing Quantity Specification

2000 PCS/ 1 Reel

Unit: mm Tolerance: ±0.1mm

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 10 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Tape Dimensions Moisture Resistant Packaging Aluminum moistue-proof bag Label Desiccant Label Unit: mm Tolerance: ±0.1mm Label Aluminum moisture-proof bag Desiccant Label

Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DCS-015-001 Rev2.0 N ov. 15, 2007 11 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority onmaterial change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.