CLQ6A-FKW CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

CLD-CT1487.001 PRODUCT FAMILY DATA SHEET Cree® PLCC8 3 in 1 SMD LED CLQ6A-FKW WWW.CREE.COM/HB Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

FEATURES

  • Size (mm):5.0 x 5.2 x 1.1
  • Dominant Wavelength Red (619 - 624nm) Green (520 - 535nm) Blue (465 - 475nm)
  • Luminous Intensity (mcd) Red (3000-7030) Green (7030-16800) Blue (1824-4180)
  • Moisture Sensitivity Level: 5a
  • Lead-Free
  • RoHS Compliant Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300

APPLICATIONS

  • Architecture Lighting
  • Decorative Lighting
  • Amusement PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC8 package. These high performance 3 color SMT LEDs are designed to work in a wide range of applications. A wide view - ing angle and high brightness make these LEDs suitable for signage ap - plications.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 200 180 180 mA Peak Forward Current Note 2 IFP 500 400 400 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 520 684 684 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 60 110 70 °C/W Junction/solder point 1 chip on RTHJS 20 70 40 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD 1000 V Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit R G B Dominant Wavelength IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) λDOM 619~624 520~535 465~475 nm Spectral bandwidth at 50% IREL max IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) Δ λ 24 38 28 nm Forward Voltage IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) VF(avg) 2.1 3.0 3.1 V VF(max) 2.6 3.8 3.8 V Luminous Intensity IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) IV(min) 3000 7030 1824 mcd IV(avg) 4500 12000 3000 mcd Luminous Flux(Reference) IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) ΦV(avg) 14 30 8.2 lm Reverse Current (max) VR = 5 V IR 10 10 10 μA Note: Continuous reverse voltage can cause LED damage.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW Tolerance of measurement of dominant wavelength is ±1 nm. Red Bin Code Min.(nm) Max.(nm) RB 619 624 Green Bin Code Min.(nm) Max.(nm) G7 520 525 G23 522.5 527.5 G8 525 530 G45 527.5 532.5 G9 530 535 Blue Bin Code Min.(nm) Max.(nm) B4 465 470 B45 467.5 472.5 B5 470 475 Red Bin Code Min.(mcd) Max.(mcd) 1L 3000 4180 1M 3590 5020 1N 4180 5860 1P 5020 7030 Green Bin Code Min.(mcd) Max.(mcd) 1R 7030 10100 1S 8200 12000 1T 10100 14400 1U 12000 16800 Blue Bin Code Min.(mcd) Max.(mcd) 1H 1824 2560 1J 2130 3000 1K 2560 3590 1L 3000 4180 Tolerance of measurement of luminous intensity is ±10%. INTENSITY BIN LIMIT(RED I F =100mA,GREEN I F =100mA,BLUE IF =100mA) COLOR BIN LIMIT (RED I F =100mA,GREEN I F =100mA,BLUE IF =100mA)

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW ORDER CODE TABLE* Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Pack- ageMin. Max. Color Bin Min. (nm) Color Bin Max. (nm) CLQ6A-FKW-C1L1P1R1U1H1LBB79453 Red 3000 7030 RB 619 RB 624 Reel Green 7030 16800 G7 520 G9 535 Reel Blue 1824 4180 B4 465 B5 475 Reel CLQ6A-FKW-C1L11R11H1BB7C4S3 Red Any 1 Intensity bin from 1L(3000) - 1P(7030) RB 619 RB 624 Reel Green Any 1 Intensity bin from 1R(7030) - 1U(16800) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from 1H(1824) - 1L(4180) Any 1 hue bin from B4(465) - B5(475) Reel Notes: 1.The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, any 1 intensity bin from 1R - 1U means only 1 intensity bin(1R or 1S or 1T or 1U) will be shipped by Cree. For example, any 1 color bin from G7 - G9 means only 1 color bin (G7 or G23 or G8 or G45 or G9) will be shipped by Cree. 2.Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions. 3.Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. 

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other- wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Solder Pad recommend: PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man- ner:

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW REFLOW SOLDERING

  • The CLQ6A-FKW is rated as a MSL 5a product.
  • The recommended floor life out of bag is 24hrs.
  • The temperature profile is as below. Use only with CLQ6A-FKW Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 250ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 60s max Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5  Recommended solder pad design for heat dissipation (4-pin SMD LED) Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW NOTES

  • The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
  • To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary: Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD  For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current  Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED.  Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED.  All devices, equipment and machinery must be properly grounded.  It is recommended to perform electrical test to screen out ESD failures at final inspection.  It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC8 3 in 1 SMD LED CLQ6A-FKW PACKAGING

  • The boxes are not water resistant and they must be kept away from water and moisture.
  • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
  • Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
  • The reel pack is applied in SMD LED.
  • Max 4000 pcs per reel. 