CLMUD-DXN-XHHJJKKLLMMNNT

CLMUD-FKA CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

CLD-CT1421.001 PRODUCT FAMILY DATA SHEET Cree® PLCC4 3 in 1 RGB SMD LED CLMUD-FKA WWW.CREE.COM/HB Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. PRODUCT DESCRIPTION The CLMUD-FKA full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 1.5mm x 1.5mm package allows for a very high resolution screen and is designed to work in a wide array of environmental conditions. Cree PLCC full-color RGB LEDs are suited for indoor video screen, decorative lighting and amusement applications.

FEATURES

• Size (mm):1.5x 1.5
• Dominant Wavelength: Red (619 - 624nm) Green (520 - 535nm) Blue (465 - 475nm)
• Luminous Intensity (mcd) Red (36 - 81)@ 5mA Green (126 - 252)@ 5mA Blue (22 - 45)@ 5mA
• Moisture Sensitivity Level: 5a
• Lead-Free
• RoHS Compliant
• Matte Surface Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300

APPLICATIONS

• Full-Color Video Screen
• Decorative lighting
• Amusement

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit R G B Dominant Wavelength IF = 5 mA λDOM 619~624 520~535 465~475 nm Spectral bandwidth at 50% IREL max IF = 5 mA Δ λ 16 28 19 nm Forward Voltage IF = 5 mA VF(avg) 1.9 2.8 2.9 V VF(max) 2.4 3.8 3.8 V Luminous Intensity IF = 5 mA IV(min) 36 126 22 mcd IV(avg) 54 180 30 mcd Luminous Intensity(Reference) IF = 20/10/10 mA IV(avg) 215 260 45 mcd Reverse Current (max) VR = 5 V IR 10 10 10 μA ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 25 13 13 mA Peak Forward Current Note 2 IFP 70 50 50 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 60 50 50 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 460 430 410 °C/W Junction/solder point 1 chip on RTHJS 250 270 250 °C/W Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. Note: Continuous reverse voltage can cause LED damage.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA INTENSITY BIN LIMIT (I F = 5 mA) Red Bin Code Min.(mcd) Max.(mcd) L8 36 45 3g3f 41 51 L9 45 56 3e3d 51 64 L 56 71 3c3b 64 81 Green Bin Code Min.(mcd) Max.(mcd) 78 126 160 D 140 180 9a 160 202 E 180 224 bc 202 252 Blue Bin Code Min.(mcd) Max.(mcd) L6 22 28 3m3k 25 32 L7 28 36 3j3h 32 41 L8 36 45 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (I F = 5 mA) Red Bin Code Min.(nm) Max.(nm) RB 619 624 Green Bin Code Min.(nm) Max.(nm) G7 520 525 G23 522.5 527.5 G8 525 530 G45 527.5 532.5 G9 530 535 Blue Bin Code Min.(nm) Max.(nm) B4 465 470 B45 467.5 472.5 B5 470 475 Tolerance of measurement of dominant wavelength is ±1 nm.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA ORDER CODE TABLE* Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Pack- ageMin. Max. Color Bin Min. (nm) Color Bin Max. (nm) CLMUD-FKA-CL83c3b78bcL6L8BB79453 Red 36 81 RB 619 RB 624 Reel Green 126 252 G7 520 G9 535 Reel Blue 22 45 B4 465 B5 475 Reel CLMUD-FKA-CL81781L61BB7C4S3 Red Any 1 Intensity bin from L8(36) - 3c3b(81) RB 619 RB 624 Reel Green Any 1 Intensity bin from 78(126) - bc(252) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from L6(22) - L8(45) Any 1 hue bin from B4(465) - B5(475) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from 78 - bc means only 1 intensity-bin (78 or D or 9a or E or bc) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - G9 means only 1 color-bin (G7 or G23 or G8 or G45 or G9) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document#2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other- wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2 3 4

1 COMMON ANODE

2 CATHODE FOR Red

4 CATHODE FOR Blue

3 CATHODE FOR Green

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man- ner:

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA REFLOW SOLDERING

• The CLMUD-FKA is rated as a MSL 5a product.
• After opening the sealed bag,the SMD LED must be stored under the condition<30ºC and<60%RH. Under these conditions,the SMD LEDs must be used (subject to reflow) within 24 hours after bag opening, and baking 24-hour/80ºC is required when exceeding 24 hours.
• Note that baking must only be done once.
• The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5  Recommended solder pad design for heat dissipation (4-pin SMD LED) Use only with CLMUD-FKA Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 235ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 45s max Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA NOTES

• The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
• To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary: Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD  For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current  Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED.  Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED.  All devices, equipment and machinery must be properly grounded.  It is recommended to perform electrical test to screen out ESD failures at final inspection.  It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice.

Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree PLCC4 3 in 1 SMD RGB LED CLMUD-FKA

• The CLMUD-FKA is rated as a MSL 5a product.
• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 12800 pcs per reel. PACKAGING  C oba lt FreeC oba lt FreeC oba lt FreeC oba lt Free AAAAvoidvoidvoidvoid etaletaletaletal CCCC