CLL3H0914L-700

Datasheet search site | www.alldatasheet.com

Document overview

• Manufacturer or author: Bert.Teeling
• PDF pages: 18

Technical content

1.1 General description

1.2 Features and benefits

Table 1. Typical performance

Table 2. Pinning Table 3. Ordering information Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).

[1] Finite Element Analysis (FEA) thermal val ues have been used for the online MTF calculator. Table 5. Thermal characteristics Table 6. DC characteristics Tcase = 25 C; unless otherwise specified. Table 7. RF characteristics

7.1 Circuit information

metallization; thickness copper plating = 70 m; 1200 MHz to 1400 MHz demo board. See Table 8 for list of components. Table 8. List of components For test circuit see Figure 1.

7.2 Impedance information

8.1 Ruggedness in class-AB operation

Table 9. Typical impedance Typical values unless otherwise specified.

8.2 Test circuit information

See Table 10 for list of components. Table 10. List of components For test circuit see Figure 3.

100 H53

Product data sheet Rev. 1 — 15 July 2022 7 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT

8.3 Graphical data

8.3.1 1200 MHz to 1400 MHz demo board VDS =5 0V ; IDq = 500 mA; tp = 100 s;  =1 0% . (1) f = 1200 MHz (2) f = 1300 MHz (3) f = 1400 MHz V DS =5 0V ; IDq = 500 mA; tp = 100 s;  =1 0% . (1) f = 1200 MHz (2) f = 1300 MHz (3) f = 1400 MHz Fig 4. Output power as a function of input power; typical values Fig 5. Drain efficiency as a function of input power; typical values VDS =5 0V ; IDq = 500 mA; tp = 100 s;  =1 0% . (1) f = 1200 MHz (2) f = 1300 MHz (3) f = 1400 MHz V DS =5 0V ; IDq = 500 mA; tp = 100 s;  =1 0% . (1) f = 1200 MHz (2) f = 1300 MHz (3) f = 1400 MHz Fig 6. Drain efficiency as a function of output power; typical values Fig 7. Power gain as a function of output power; typical values amp01165 0 5 10 15 20 25 30 200 400 600 800 1000 Pi (W) PLPL (W)(W)(W) (1)(1)(1) (2)(2)(2) (3)(3)(3) amp01166 0 5 10 15 20 25 30 Pi (W) ηDηD (%)(%)(%) (1)(1)(1) (2)(2)(2) (3)(3)(3) amp01167 0 200 400 600 800 1000 PL (W) ηDηD (%)(%)(%) (3)(3)(3) (2)(2)(2) (1)(1)(1) amp01168 0 200 400 600 800 1000 PL (W) GpGp (dB)(dB)(dB) (1)(1)(1)(2)(2)(2) (3)(3)(3)

Product data sheet Rev. 1 — 15 July 2022 8 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT VDS =5 0V ; IDq = 500 mA; tp = 100 s;  =1 0% . (1) f = 1200 MHz (2) f = 1300 MHz (3) f = 1400 MHz V DS =5 0V ; IDq = 500 mA; Pi = 42.3 dBm; tp = 100 s;  =1 0% . Fig 8. Output power as a function of input power; typical values Fig 9. Power gain as a function of frequency; typical values VDS =5 0V ; IDq = 500 mA; Pi = 42.3 dBm; tp = 100 s;  =1 0% . VDS =5 0V ; IDq = 500 mA; Pi = 42.3 dBm; tp = 100 s;  =1 0% . Fig 10. Drain efficiency as a function of frequency; typical values Fig 11. Output power as a function of frequency; typical values amp01169 20 25 30 35 40 45 Pi (dBm) PLPL (dBm)(dBm)(dBm) (1)(1)(1) (2)(2)(2) (3)(3)(3) amp01170 1150 1200 1250 1300 1350 1400 1450 15.5 16.5 17.5 f (MHz) GpGp (dB)(dB)(dB) amp01171 1150 1200 1250 1300 1350 1400 1450 f (MHz) ηDηD (%)(%)(%) amp01172 1150 1200 1250 1300 1350 1400 1450 58.5 59.5 f (MHz) PLPL (dBm)(dBm)(dBm)

Product data sheet Rev. 1 — 15 July 2022 9 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT VDS =5 0V ; IDq = 500 mA; Pi = 42.5 dBm;  =2 0% . (1) t p = 500 s (2) t p =1m s (3) t p =2m s VDS =5 0V ; IDq = 500 mA; Pi = 42.5 dBm;  =2 0% . (1) t p = 500 s (2) t p =1m s (3) t p =2m s Fig 12. Output power as a function of frequency, typical values Fig 13. Drain efficiency as a function of frequency; typical values VDS =5 0V ; IDq = 500 mA; Pi = 42.5 dBm;  =2 0% . (1) t p = 500 s (2) t p =1m s (3) t p =2m s Fig 14. Power gain as a function of frequency, typical values amp01173 1150 1200 1250 1300 1350 1400 1450 58.5 59.5 f (MHz) PLPL (dBm)(dBm)(dBm) (1)(1)(1) (2)(2)(2) (3)(3)(3) amp01174 1150 1200 1250 1300 1350 1400 1450 68.5 69.5 70.5 71.5 72.5 73.5 74.5 f (MHz) ηDηD (%)(%)(%) (1)(1)(1) (2)(2)(2) (3)(3)(3) amp01175 1150 1200 1250 1300 1350 1400 1450 15.5 16.5 17.5 f (MHz) GpGp (dB)(dB)(dB) (1)(1)(1) (2)(2)(2) (3)(3)(3)

Product data sheet Rev. 1 — 15 July 2022 10 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT 8.3.2 1030 MHz demo board f = 1030 MHz; VDS =5 0V ; IDq = 200 mA; tp = 128 s;  =1% . f = 1030 MHz; VDS =5 0V ; IDq = 200 mA; tp = 128 s;  =1% . Fig 15. Output power as a function of input power; typical values Fig 16. Drain efficiency as a function of output power; typical values f = 1030 MHz; VDS =5 0V ; IDq = 200 mA; tp = 128 s;  =1% . Fig 17. Power gain as a function of output power; typical values amp01176 0 5 10 15 20 25 30 200 400 600 800 Pi (W) PLPL (W)(W)(W) amp01177 0 200 400 600 800 1000 PL (W) ηDηD (%)(%)(%) amp01178 0 200 400 600 800 1000 PL (W) GpGp (dB)(dB)(dB)

Product data sheet Rev. 1 — 15 July 2022 11 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT 8.3.3 960 MHz to 1215 MHz demo board VDS =5 0V ; IDq = 200 mA; tp = 100 s;  =1 0% . (1) f = 960 MHz (2) f = 1030 MHz (3) f = 1090 MHz (4) f = 1150 MHz (5) f = 1215 MHz V DS =5 0V ; IDq = 200 mA; tp = 100 s;  =1 0% . (1) f = 960 MHz (2) f = 1030 MHz (3) f = 1090 MHz (4) f = 1150 MHz (5) f = 1215 MHz Fig 18. Output power as a function of input power; typical values Fig 19. Drain efficiency as a function of output power; typical values amp01179 0 5 10 15 20 25 30 200 400 600 800 1000 Pi (W) PLPL (W)(W)(W) (5)(5)(5) (4)(4)(4) (3)(3)(3) (2)(2)(2) (1)(1)(1) amp01180 0 200 400 600 800 1000 PL (W) ηDηD (%)(%)(%) (5)(5)(5) (4)(4)(4) (3)(3)(3) (2)(2)(2) (1)(1)(1)

Product data sheet Rev. 1 — 15 July 2022 12 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT VDS =5 0V ; IDq = 200 mA; tp = 100 s;  =1 0% . (1) f = 960 MHz (2) f = 1030 MHz (3) f = 1090 MHz (4) f = 1150 MHz (5) f = 1215 MHz V DS =5 0V ; IDq = 200 mA; tp = 100 s;  =1 0% . (1) P L(1dB) (2) P L(2dB) Fig 20. Power gain as a function of output power; typical values Fig 21. Output power as a function of frequency; typical values amp01181 0 200 400 600 800 1000 PL (W) GpGp (dB)(dB)(dB) (5)(5)(5) (4)(4)(4) (3)(3)(3) (2)(2)(2) (1)(1)(1) amp01182 950 1000 1050 1100 1150 1200 1250 200 400 600 800 1000 f (MHz) PLPL (W)(W)(W) (1)(1)(1) (2)(2)(2)

Product data sheet Rev. 1 — 15 July 2022 13 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT 9. Package outline Fig 22. Package outline SOT502A REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT502A 12-05-02 21-07-22 0 5 10 mm scale Flanged ceramic package; 2 mounting holes; 2 leads SOT502A p L A F b D U2H Q c E A C q C B M Mw2 UNIT A mm Db 12.83 12.57 0.15 0.08 20.02 19.61 9.53 9.25 19.94 18.92 9.91 9.65 4.72 3.43 c U2 0.25 0.5127.94 qw 2w1F 1.14 0.89 34.16 33.91 L 5.33 4.32 p 3.38 3.12 Q 1.70 1.45 EE 1 9.50 9.30 inches 0.505 0.495 0.006 0.003 0.788 0.772 19.96 19.66 0.786 0.774 0.375 0.364 0.785 0.745 0.390 0.380 0.186 0.035 1.345 1.335 0.210 0.170 0.133 0.123 0.067 0.057 0.374 0.366 H DIMENSIONS (millimetre dimensions are derived from the original inch dimensions) w1 ABM M M

Product data sheet Rev. 1 — 15 July 2022 14 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT Fig 23. Package outline SOT502B REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT502B 12-05-02 21-07-22 0 5 10 mm scale Earless flanged ceramic package; 2 leads SOT502B A F b D L H Q c E D D M Mw2 UNIT A mm Db 12.83 12.57 0.15 0.08 20.02 19.61 9.53 9.25 19.94 18.92 9.91 9.65 4.72 3.43 c U2 0.25 w2F 1.14 0.89 20.70 20.45 L 5.33 4.32 Q 1.70 1.45 EE 1 9.50 9.30 inches 0.505 0.495 0.006 0.003 0.788 0.772 19.96 19.66 0.786 0.774 0.375 0.364 0.785 0.745 0.390 0.380 0.186 0.135 0.0100.045 0.035 0.815 0.805 0.210 0.170 0.067 0.057 0.374 0.366 H DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)

[1] CDM classification C2B is granted to any part t hat passes after exposure to an ESD pulse of 750 V. [2] HBM classification 1A is granted to any part t hat passes after exposure to an ESD pulse of 250 V. electrostatic sensitive devices. Table 11. ESD sensitivity Table 12. Abbreviations Table 13. Revision history

Product data sheet Rev. 1 — 15 July 2022 16 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT 13. Legal information

13.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.ampleon.com.

13.2 Definitions

Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Ampleon does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Ampleon sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Ampleon and its customer, unless Ampleon and customer have explicitly agreed otherwise in writing. An agreement according to which the functions and qualities of Ampleon products exceed those described in the Product data sheet is invalid.

13.3 Disclaimers

Maturity — After the relevant product(s) have passed the Release Gate in Ampleon's release process, Ampleon will confirm the final version in writing. Limited warranty and liability — Ampleon uses its best efforts to keep the information in this document accurate and reliable. However, Ampleon gives no representations or warranties, expressed or implied, as to the accuracy or completeness of such information and assumes no liability for the consequences of the use of such information. Ampleon is not liable for content provided by an external information source. In no event and irrespective of the legal basis (contract, tort (including negligence) statutory liability, misrepresentation, indemnity or any other area of law) shall Ampleon be liable for any indirect, incidental, punitive, special or consequential damages (including but without limitation loss of profit or revenue, loss of use or loss of production, loss of data, cost of capital, cost of substitute goods, property damage external to the Ampleon products and any damage, expenditure or loss arising out of such damage, business interruption, costs related to the removal or replacement of any products or rework charges) or any of the foregoing suffered by any third party. Notwithstanding any damages that customer might incur for any reason whatsoever, Ampleon’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Ampleon. Right to make changes — Ampleon reserves the right to change information including but without limitation specifications and product descriptions published in this document at any time and without notice. This document supersedes and replaces all information regarding these products supplied prior to the publication hereof. Suitability for use — Ampleon products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Ampleon product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Insofar as a customer or another party nevertheless uses Ampleon products unlawfully for such purposes, Ampleon and its suppliers are not liable for any damages. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Ampleon makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Ampleon products, and Ampleon is not liable for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Ampleon product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers shall provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Ampleon is not liable related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for and shall do all necessary testing for the customer’s applications and products using Ampleon products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Ampleon is not liable in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not guaranteed. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Ampleon products are sold subject to the general terms and conditions of commercial sale, as published at http://www.ampleon.com/terms, unless otherwise agreed in a valid written individual agreement. In the event of signing an individual agreement the terms and conditions of the respective agreement shall apply. Ampleon hereby expressly objects to and rejects the validity of customer's terms and conditions regarding the purchase of Ampleon products by customer. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains da ta from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This docu ment contains the product specification.

Product data sheet Rev. 1 — 15 July 2022 17 of 18 CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Ampleon product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Ampleon is not liable for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer breaches this and uses the products for design and use in automotive applications in accordance with automotive specifications and standards, (a) Ampleon gives no warranty, representation or other guarantees of any kind with respect to such automotive applications, use and specifications, and (b) such use is solely and exclusively at customer's own risk, and (c) customer fully indemnifies Ampleon against any and all liability, damages or failed product claims, including against third parties, arising out of customer's design and use of the product for automotive applications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.

13.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.ampleon.com For sales office addresses, please visit: http://www.ampleon.com/sales

CLL3H0914L(S)-700 L-band internally pre-matched GaN-SiC HEMT © Ampleon Netherlands B.V. 2022. All rights reserved. For more information, please visit: http://www.ampleon.com For sales office addresses, please visit: http://www.ampleon.com/sales Date of release: 15 July 2022 Document identifier: CLL3H0914L-700_0914LS-700 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 15. Contents