CLEGK1 TM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
A single input thermocouple thermometer with an integral timer with a separate 1 minute and 2 minute count. This thermometer is primarily developed for use in Legionella risk management and offers reassurance that the correct reading is taken when monitoring hot and cold water temperatures. Single input thermocouple thermometer C/ F switchable Counter ensures that the correct temperature is met 1 minute counter for hot water temperatures 2 minute counter for cold water temperature Resolution of 0.1 to 1000 autoranging Switchable thermocouple K & T only Full retention of thermocouple type and temperature scale Auto Switch Off capability Easy to use software calibration Overrange / Open circuit sensor indication Low battery indication Supplied complete with shock resistant rubber boot IP67 casing Using the Timer 1. Press either for 1 minute count or for 2 minute count. 2. Press the same button again to switch off. Specification Environmental AMBIENT OPERATING RANGE : -30 to 50 C STORAGE TEMPERATURE RANGE : -40 to 50 C HUMIDITY : 0 to 70% R.H. Electrical MEASUREMENT RANGES : K -200 to 1372 C T -200 to 400 C THERMOCOUPLE TYPES : K & T TEMPERATURE SCALES : C / F ACCURACY @23C : +/- 0.1% OF READING +/- 0.2 C CHARACTERISING ACCURACY : LESS THAN 0.05 C TEMPERATURE COEFFICIENT : 0.01% OF READING /C COLD JUNCTION COMPENSATION : 0.0075 C/C
RESOLUTION : 0.1 to 1000, 1 ABOVE 1000 General BATTERY : PP3 9V I.E.C. 6F22 BATTERY LIFE (INTERMITTENT USE) : GREATER THAN 200 HOURS (ALKALINE) WEIGHT : 155 gm DIMENSIONS : 130 X 70 X 33 mm Probe
Description
This probe uses the straight handle for fine control. The probe is designed for the measurement of both surface temperatures and Immersion temperatures. NOTE: This probe only requires light pressure to give a true reading and is suitable for smooth, clean surfaces. If used on an uneven surface, there is a risk that the band will be weakened and deformed. Construction Ribbon band sensor with thermocouple sensor attached and draught shield: Stainless Steel 316 (Food Grade) Sealed with Silicon Rubber compound to ensure the probe is fully waterproof. 1M straight polyurethane cable with moulded connector. TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This results in a solid handle as opposed to a hollow handle. This is particularly important as there is often damage to the handles caused by excess heat. With a hollow handle it is possible to puncture the outer plastic and damage the sensor irreparably. WATERPROOF HANDLE Due to the total encapsulation method used, all TME probe handles are completely waterproof. TOUGH POLYURETHANE CABLE Polyurethane cables are used in place of the standard PVC for the following reasons Non–Toxic Greater mechanical strength for durability 12 X 0.2mm wires used internally for greater strength. PTFE inner insulation for strength and retractability. HIGH ACCURACY THERMOCOUPLE MATERIAL THROUGHOUT Type ‘K’ Thermocouple : Class I (±1.5°C ±0.25%) POLYPROPYLENE HANDLES Polypropylene is an extremely tough and durable material, commonly used for milk crates, it has good low temperature performance and a relatively high melt temperature. It performs exceptionally well under chemical attack. WIDE AMBIENT TEMPERATURE SPECIFICATION : -30 TO 50 °C TIME RESPONSE (96% of value on clean metal) : 3 Secs MEASUREMENT RANGE : -50 TO 250 °C (higher for non-continuous measurement)
Cross-reference for compatible probes Suitable probes for use with this instrument TME PART No DESCRIPTION APPLICATION T/C TYPE KM08 LEGIONELLA SHOWER PROBE SHOWER/WATER TEMPERATURE K KS20-S HIGH SPEED REINFORCED DUAL SURFACE/IMMERSION PROBE FOR SURFACE AND IMMERSION MEASUREMENT K KPS10 PIPE CLAMP PROBE PROBE DESIGNED TO BE CLAMPED ONTO PIPES K KP05 NEEDLE PROBE CORE TEMPERATURE OF SEMI-SOLID MATERIAL K TP05 NEEDLE PROBE CORE TEMPERATURE OF SEMI-SOLID MATERIAL T KP07 NEEDLE PROBE HEAVY DUTY CORE TEMPERATURE OF SEMI-SOLID MATERIAL K TP07 NEEDLE PROBE HEAVY DUTY CORE TEMPERATURE OF SEMI-SOLID MATERIAL T KM01 LIGHT DUTY M.I. PROBE GENERAL PURPOSE LIQUID/GAS MEASUREMENT K TM01 LIGHT DUTY M.I. PROBE GENERAL PURPOSE LIQUID/GAS MEASUREMENT T KM03 M.I. PROBE GENERAL PURPOSE LIQUID/GAS MEASUREMENT K TM03 M.I. PROBE GENERAL PURPOSE LIQUID/GAS MEASUREMENT T KM04 M.I. PROBE EXTENDED LENGTH GENERAL PURPOSE LIQUID/GAS MEASUREMENT K TM04 M.I. PROBE EXTENDED LENGTH GENERAL PURPOSE LIQUID/GAS MEASUREMENT T KS01 SURFACE BAND PROBE FAST RESPONSE SURFACE MEASUREMENT K TS01-S DUAL PROBE FOR SURFACE AND IMMERSION MEASUREMENT T KS07 SURFACE PROBE GENERAL PURPOSE SURFACE MEASUREMENT K TS04 SURFACE PROBE GENERAL PURPOSE SURFACE MEASUREMENT T KS08 HIGH TEMP SURFACE PROBE HIGH TEMPERATURE SURFACE MEASUREMENT K KA04 AIR TEMPERATURE PROBE FAST RESPONSE AIR TEMPERATURE PROBE K TA04 AIR TEMPERATURE PROBE FAST RESPONSE AIR TEMPERATURE PROBE T TA12 SPATULA PROBE BETWEEN PACK PROBE T KH01 SOCKET IN HANDLE HANDLE FOR USE WITH PLUG MOUNTED PROBES K TH01 SOCKET IN HANDLE HANDLE FOR USE WITH PLUG MOUNTED PROBES T KHA02 PLUG MOUNTED AIR PROBE FAST RESPONSE AIR TEMPERATURE PROBE K THA2 PLUG MOUNTED AIR PROBE FAST RESPONSE AIR TEMPERATURE PROBE T KHM01 PLUG MOUNTED M.I. PROBE GENERAL PURPOSE LIQUID/GAS MEASUREMENT K THM01 PLUG MOUNTED M.I. PROBE GENERAL PURPOSE LIQUID/GAS MEASUREMENT T KHN01 PLUG MOUNTED NEEDLE PROBE CORE TEMPERATURE OF SEMI-SOLID MATERIAL K THN01 PLUG MOUNTED NEEDLE PROBE CORE TEMPERATURE OF SEMI-SOLID MATERIAL T THA12 PLUG MOUNTED SPATULA PROBE BETWEEN PACK PROBE T KHS01 PLUG MOUNTED SURFACE BAND PROBE FAST RESPONSE SURFACE MEASUREMENT K KHS02 PLUG MOUNTED SURFACE PROBE GENERAL PURPOSE SURFACE MEASUREMENT K THS02 PLUG MOUNTED SURFACE PROBE GENERAL PURPOSE SURFACE MEASUREMENT T PKHV1 HVAC KIT PROBE KIT DESIGNED FOR THE HVAC INDUSTRY K T PKGP1 GENERAL PURPOSE KIT PROBE KIT CONTAINING MOST POPULAR PROBES K