CHV1001P DURAKOOL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
HVDC Contactor 1000A / 1500VDC Specifications are subject to change without notice. E&OECHV1000P 09 Dec 25KS durakool.com Contacts Contact arrangement SPST-NO-DM Contact material Oxygen Free Copper Max. switching voltage 1500VDC Rated load DC1 1000A 1500VDC Max. continuous thermal current 15min 1200A 3min 1100A 10s 2000A 15ms 8000A Max. switching current 1 time only 2000A 1000VDC Initial contact resistance max. 0.3mΩ @ 20A / 6VDC Auxiliary Contact arrangement SPST-NO (1 Form A) max. current 2A @ 24VDC min. current 5mA @ 12VDC resistance ≤300mΩ Coil Nominal voltage (see page 2) 12VDC, 24VDC Rated power consumption hold <5W Insulation Insulation resistance Initial (min.) ≥1000MΩ, 1000VDC, 1 min* Dielectric strength coil to contact 4000Vrms / ≤10mA / 1 min* open contacts 4000Vrms / ≤10mA / 1 min* General data Operate time at 20°C max. 50ms Bounce time at 20°C max. 10ms Release time at 20°C max. 30ms Electrical life (1s on/ 1s off) Voltage and current dependant - see fig 1. Mechanical life ≥ 2 x 105 ops. Environmental Environmental seal power contacts IP67 Ambient temperature operating -40 to 85°C Relative humidity 5 to 85%RH Altitude ≤4000m Shock resistance function 20G peak x-y axis, 10G peak z axis, 11ms ½ sine destructive 50G peak, 6ms ½ sine Vibration resistance (malfunction <10μs) 10Hz ~ 55Hz, single amplitude 1.5mm 55Hz ~ 2000Hz, 5G Dimensions L x W x H 104.0 x 70.0 x 108.1 mm Weight approx. 1100g
- HVDC 2000A carry current (10s)
- Max. switching current = 2000A / 1000VDC
- Contacts sealed in inert gas
- Magnet arc blowout
- Non-polarised power terminals
- Ceramic arc chamber
- Dual coil economiser as standard
- Auxiliary contact as standard Ordering code C H V 1 0 0 1 P Series Power Terminal Options 0: Female M8 (standard) Coil Voltage (see table 1) 1: 12VDC 2: 24VDC Version P: Power Notes: 1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC. 2: Product can be oriented in any position. 3: Contacts are not polarised 4: Coil is polarised *6000Vrms / ≤1mA/ 2s *image is for illustrative purposes. Please refer to datasheet for detail. E305753
HVDC Contactor 1000A / 1500VDC Specifications are subject to change without notice. E&OECHV1000P 09 Dec 25KS durakool.com Circuit diagram fig. 2Dimensions (mm) fig. 1 Electrical perfomance - Life and Endurance fig. 3 Durakool Label Coil (-ve) Black AWG20 Coil (+ve) Red AWG20 Auxiliary Contacts Blue Auxiliary Contacts White 300±10 108.1 ±1 104 ±1 89.6 ±0.4 4 x 9 91 ±0.3 45 ±0.3 70 ±1 57 ±0.3 2 x M8 14mm A1 A2 +ve (Red) -ve (Black)K Notes: 1: Nominal dimensions in mm. 2: Tolerances (nominal), <10mm: ±0.3mm, 10 ~ 50mm: ±0.6mm, >50mm: ±1.0mm. 3: Torque settings Terminals: 12 - 15Nm Base Mounting: 3 - 4Nm Notes: 1. Electrical performance estimates are based on tests and extrapolated data (extrapolated data can be seen with dotted line). The user is advised to confirm the performance in their application. 2. Carry current data was tested at 85°C ambient temperature with bus bar ≥650mm². The data is for reference only and should not be used to select fuses directly. 3. Dual coil economiser as standard. 100 1000 10000 100000 1 10 100 1000 10000 Estimated Life (cycles) Current (A) 450VDC 1000VDC 1500VDC 0.01 0.1 100 1000 10000 100 1000 10000 Time (s) Current (A) Estimated Life Carry Current vs Time Coil data table 1 Coil code Nominal coil voltage (VDC) Must operate voltage max. (VDC) Max. allowable voltage (VDC) Must release voltage min. (VDC) Making current (±10%) (A) Holding Current (±10%) (A) Rated coil power (W) Operate Hold 0.3s 5.0 Dual coil product has been configured with coil surge absorption circuit, engineers do not need to configure.