CHM120230-1356

CHM ITT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 36

Technical content

2.0 CONNECTOR SYSTEM

acc. to IEC 61076 - 4 - 101 CM-1/899

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes

Contents

CHM 2.0 Connector System acc to IEC 61076-4-101 Definition of Terms Connector according to IEC 61076-4-101 The hardmetric connector system CHM 2.0 was developed according to the international standard IEC 61076-4-101. As a result, a worldwide standard for the combination of PCBs is safeguarded by multicontact plug-and-socket connectors for customers. PCBs can be exchanged without problems from system to system. Important parameters like fixing, shielding and coding remain compatible to all applications. The spacing The CHM 2.0 connectors have been developed with a spacing of 2 mm between contacts. These connectors are modular and therefore can be stacked together without interrupting the continuity of the 2 mm design. No space is wasted within a row of connectors. Module stacking To improve stacking and to avoid accidental reversal of connectors the end of the housings engage the adjacent connector to insure exact positioning onto the PCB board and give the modules the necessary support. Coding In order to avoid accidental plug-in among PC boards the IEC 61076-4- 101 standard provides protection through coding. Coding keys are easily hand inserted into the multifunction block of the connector module A, L and M. The pins are colour coded for fast visual recognition. Multifunction block The modules A, L, M and compact PCI are equipped with a multifunction block. The coding devices, according to the IEC standard, can be added to the multifunction block. The guides guaranty the correct mating and prohibit accidental reversal of the male and female connectors. The coding devices may be assembled by a single plug and pulling tool and/or again removed. Contact length of the rear and front mating area ITT Industries Cannon offers 3 different lengths for the front mating area and 4 lengths for the rear mating area for the CHM 2.0 male connectors. A tin-plated Wire Wrap type is equally available. Different contact lengths are required for signal and ground contacts to establish first mate and last break features. The long contacts with 11,25 mm are predominantly used for the shielding rows z and f. Through-hole specification of the PCB Through-plated holes for signal contacts and shieldings in press-fit techniques. ØeloHm m6,0 elohllirD mm27,0-86,0 uC mµ52.nim nS mµ51-5 hguorhtdetalP eloh mm56,0-55,0

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes ytilibarudlacinahceM selcyCgnitaM052> gnisuoH 0-V49LU.ccadellifssalGretseyloP 5-215CEIot.ccaecnatsisertcatnoC m02.xam W lairetamtcatnoC tcatnocelaM eznorB tcatnocelameF eznorB ecafrustcatnocelamefdnaelaM iNrevoiNdPrevouA ecnatsisernoitalusnI 5-215CEI.cca tcatnoC/tcatnoC0 1.nim 4 MW dleihS/tcatnoC0 1.nim 4 MW niprepecrofnoitresnI tcatnoC N57,0.xam dleihS N1.xam niprepecrofnoitcartxE tcatnoC N51,0.nim dleihS N51,0.nim gnicapS mm2 egnarerutarepmeT C°521+sibC°55- ytilibarudlacinahceM selcyCgnitaM052> Technical Data egatlovtseT dedaolyllufn oitisopdn2yreved raobssehC e,c,awoR d,bwoR wornihtiwV 057 ffe V0051 ffe -- sworneewtebV 0051 ffe V0051 ffe -- c,b,awoR d,c,b,awoR e,d,c,b,awoR wornihtiwV 057 ffe V0051 ffe V0051 ffe sworneewtebV 057 ffe V057 ffe V0021 ffe Test voltage spagriadna-egapeerC dedaolyllufn otisopdn2yreved raobssehC rotcennocelaM seludoM rotcennocelameF elaMenalpkcaB rotcennoc elameFseludoM rotcennoc elaMenalpkcaB rotcennoc elameFseludoM rotcennoc e,c,awoR d,bwoR wornihtiwm m8,0m m6,0m m5,2m m5,2- -- - sworneewtebm m5,2m m5,2m m5,2m m5,2- -- - c,b,awoR d,c,b,awoR e,d,c,b,awoR wornihtiwm m8,0m m6,0m m5,2m m5,2m m5,2m m5,2 sworneewtebm m8,0m m6,0m m8,0m m6,0m m5,1m m2,1 Creepage- and air gaps > 500 Mating Cycles > 250 Mating Cycles Performance class 1 Performance class 2 Electrical and mechanical data

CHM 2.0 Connector System acc to IEC 61076-4-101 AAAM AL AA AAB AB B AAA A A B A A B A A L A C N C 100 125 150 175 200 225 250 275 300 325 350 375 400 B BB System modularity CHM 2.0 modules offer a great versatility to optimize large contact densities. Especially the combination with coaxial or fiberoptic connections. Stacking can be arranged from 50 mm using type A module, increasing in 25 mm steps to required lengths. Connectors with multifunction block (type A, M, L) are preferably used at the top of any column. Type B is only used between other modules. The modules type C and N (25 mm) are polarized and are used at the bottom end of the columns. Correct mating is assured by use of coding keys within the multifunction block and by use of type C and N modules. * total length for Europa cards ** total length for ETSI PCBs

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes stcatnocfonoisnemiDt catnoCs noitpOg nitamtnorFr ofdesU A aeragnitamtuohtiw 1,0–52,8t catnoclangis B1 ,0–57,9t catnoclangis C1 ,0–52,11g nidleihs G parWeriW mm31 tseuqerno 1,0–52,8t catnoclangis H1 ,0–57,9t catnoclangis J1 ,0–52,11g nidleihs K aeragnitamhtiw mm31 1,0–52,8t catnoclangis L1 ,0–57,9t catnoclangis M1 ,0–52,11g nidleihs N aeragnitamhtiw mm5,41 1,0–52,8t catnoclangis P1 ,0–57,9t catnoclangis Q1 ,0–52,11g nidleihs R aeragnitamhtiw mm61 1,0–52,8t catnoclangis S1 ,0–57,9t catnoclangis T1 ,0–52,11g nidleihs

CHM 2.0 Connector System acc to IEC 61076-4-101 Male Connectors Type A

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Insertion tool: Part Number 121586-5081 + Attention: Please consider the different pin lengths in the assembly drawing. Assembly Drawing No. of Positions Row Type Pin length Part Numbers z - -/- a A 8,25/3,7 b A 8,25/3,7 110 c A 8,25/3,7 CHM-M-A25-0AAAAA0-1 * d A 8,25/3,7 CHM-M-A25-0AAAAA0-2** e A 8,25/3,7 f - -/- z - -/- a B 9,75/3,7 b B 9,75/3,7 110 c B 9,75/3,7 CHM-M-A25-0BBBBB0-1 * d B 9,75/3,7 CHM-M-A25-0BBBBB0-2** e B 9,75/3,7 f - -/- z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 154 c A 8,25/3,7 CHM-M-A25-CAAAAAC-1 * d A 8,25/3,7 CHM-M-A25-CAAAAAC-2** e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 154 c B 9,75/3,7 CHM-M-A25-CBBBBBC-1 * d B 9,75/3,7 CHM-M-A25-CBBBBBC-2** e B 9,75/3,7 f C 11,25/3,7 Compact PCI z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 154 c ++ CHM-120230-500 * e B 9,75/3,7 f C 11,25/3,7 cPCI Hot Swap z C 11,25/3,7 a B 9,75/3,7 b+ + 154 c + + CHM-120230-502 * e B 9,75/3,7 f C 11,25/3,7 cPCI Telephony Spec. z– – a+ + b+ + 100 c + + CHM-120230-504 * e+ + f+ + z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 154 c P 9,75/14,5 CHM-M-A25-TPPPPPT-1 * d P 9,75/14,5 CHM-M-A25-TPPPPPT-2** e P 9,75/14,5 f T 11,25/16,0 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Type No. of Positions Part Numbers connector without shielding 110 CHM-F-A25-P1-0-1* CHM-F-A25-P1-0-2** connector with shielding 110 CHM-F-A25-P1-S-1* CHM-F-A25-P1-S-2** connector with shielding CHM120230-0* cPCI Telephony Spec. CHM120230-1** lower shield CHM120230-9000 Female Connectors Type A lower shield 10x2=20 10x2=208 max. 1 4x2=8 a b c d e max. 503.1 10x2=20 10x2=204 4 0.6 –0.05 5x2=10 1.5 11.4 12.25 25 15 13 11 1 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Positions Row Type Pin length Part Numbers z – –/– a A 8,25/3,7 b A 8,25/3,7 125 c A 8,25/3,7 CHM-M-B25-0AAAAA0-1 * d A 8,25/3,7 CHM-M-B25-0AAAAA0-2** e A 8,25/3,7 f – –/– z – –/– a B 9,75/3,7 b B 9,75/3,7 125 c B 9,75/3,7 CHM-M-B25-0BBBBB0-1 * d B 9,75/3,7 CHM-M-B25-0BBBBB0-2** e B 9,75/3,7 f – –/– z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 175 c A 8,25/3,7 CHM-M-B25-CAAAAAC-1 * d A 8,25/3,7 CHM-M-B25-CAAAAAC-2** e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 175 c B 9,75/3,7 CHM-M-B25-CBBBBBC-1 * d B 9,75/3,7 CHM-M-B25-CBBBBBC-2** e B 9,75/3,7 f C 11,25/3,7 Male Connectors Type B Insertion Tool: Part Number 121586-5083 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Type No. of Positions Part Numbers connector without shielding 125 CHM-F-B25-P1-0-1* CHM-F-B25-P1-0-2** connector with shielding 125 CHM-F-B25-P1-S-1* CHM-F-B25-P1-S-2** lower shield CHM120230-9001 Female Connectors Type B lower shield * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Positions Row Type Pin length Part Numbers z C 11,25/37 a A 8,25/3,7 b A 8,25/3,7 154 c A 8,25/3,7 CHM-M-B22-CAAAAAC-1 * d A 8,25/3,7 CHM-M-B22-CAAAAAC-2** e A 8,25/3,7 f C 11,25/37 z C 11,25/3,7 a * 8,25/3,7 b * 8,25/3,7 154 c * 8,25/3,7 CHM120230-506 * d * 8,25/3,7 CHM120230-507** e * 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 154 c B 9,75/3,7 CHM-M-B22-CBBBBBC-1 * d B 9,75/3,7 CHM-M-B22-CBBBBBC-2** e B 9,75/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 154 c P 9,75/14,5 CHM-M-B22-TPPPPPT-1 * d P 9,75/14,5 CHM-M-B22-TPPPPPT-2** e P 9,75/14,5 f T 11,25/16,0 Male Connectors Type B-22 (Compact PCI P2/P5) Insertion Tool: Part Number 121586-5084 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Type No. of Positions Part Numbers connector without shielding 110 CHM-F-B22-P1-0-1* CHM-F-B22-P1-0-2** connector with shielding 110 CHM-F-B22-P1-S-1* CHM-F-B22-P1-S-2** lower shield CHM120230-9002 Female Connectors Type B-22 (Compact PCI J2/J5) lower shield * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Positions Row Type Pin length Part Numbers z – –/– a A 8,25/3,7 b A 8,25/3,7 95 c A 8,25/3,7 CHM-M-B19-0AAAAA0-1 * d A 8,25/3,7 CHM-M-B19-0AAAAA0-2** e A 8,25/3,7 f – –/– z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 133 c A 8,25/3,7 CHM-M-B19-CAAAAAC-1 * d A 8,25/3,7 CHM-M-B19-CAAAAAC-2** e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 133 c B 9,75/3,7 CHM-M-B19-CBBBBBC-1 * d B 9,75/3,7 CHM-M-B19-CBBBBBC-2** e B 9,75/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 133 c P 9,75/14,5 CHM-M-B19-TPPPPPT-1 * d P 9,75/14,5 CHM-M-B19-TPPPPPT-2** e P 9,75/14,5 f T 11,25/16,0 Male Connectors Type B-19 (VME J0 und C-PCI P3) Insertion Tool: Part Number 121586-5083 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Type No. of Positions Part Numbers connector without shielding 95 CHM-F-B19-P1-0-1* CHM-F-B19-P1-0-2** connector with shielding 95 CHM-F-B19-P1-S-1* CHM-F-B19-P1-S-2** lower shield CHM120230-9003 Female Connectors Type B-19 (VME P0 und C-PCI J3) lower shield * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Positions Row Type Pin length Part Numbers z – –/– a A 8,25/3,7 b A 8,25/3,7 55 c A 8,25/3,7 CHM-M-C11-0AAAAA0-1 * d A 8,25/3,7 CHM-M-C11-0AAAAA0-2** e A 8,25/3,7 f – –/– z – –/– a B 9,75/3,7 b B 9,75/3,7 55 c B 9,75/3,7 CHM-M-C11-0BBBBB0-1 * d B 9,75/3,7 CHM-M-C11-0BBBBB0-2** e B 9,75/3,7 f – –/– z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 77 c A 8,25/3,7 CHM-M-C11-CAAAAAC-1 * d A 8,25/3,7 CHM-M-C11-CAAAAAC-2** e A 8,25/3,7 f C 11,25/3,7 z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 77 c B 9,75/3,7 CHM-M-C11-CBBBBBC-1 * d B 9,75/3,7 CHM-M-C11-CBBBBBC-2** e B 9,75/3,7 f C 11,25/3,7 Male Connectors Type C Insertion Tool: Part Number 121586-5087 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Type No. of Positions Part Numbers connector without shielding 55 CHM-F-C11-P1-0-1* CHM-F-C11-P1-0-2** connector with shielding 55 CHM-F-C11-P1-S-1* CHM-F-C11-P1-S-2** lower shield CHM120230-9006 Female Connectors Type C lower shield * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Pos. Row Type Pin length Part Numbers z C 11,25/3,7 a B 9,75/3,7 b B 9,75/3,7 308 c + + /3,7 CHM-120230-508 * e B 9,75/3,7 f C 11,25/3,7 z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 308 c A 8,25/3,7 CHM-M-A47-CAAAAAC-1* d A 8,25/3,7 CHM-M-A47-CAAAAAC-2** e A 8,25/3,7 f C 11,25/3,7 z T 11,25/16,0 a P 9,75/14,5 b P 9,75/14,5 308 c P 9,75/14,5 CHM-M-A47-TPPPPPT-1* d P 9,75/14,5 CHM-M-A47-TPPPPPT-2** e P 9,75/14,5 f T 11,25/16,0 Male Connectors Type Compact PCI (P1+P2/P4+P5) Insertion tool: Part Number 121586-5080 On request: Telephony Spec./Hot Swap + Attention: Please consider the different pin lengths in the assembly drawing. * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Type No. of Positions Part Numbers connector without shielding 220 CHM-F-A47-P1-0-1* CHM-F-A47-P1-0-2** connector with shielding 220 CHM-F-A47-P1-S-1* CHM-F-A47-P1-S-2** lower shield CHM120230-9000 and CHM120230-9002 Female Connectors Type Compact PCI (J1+J2/J4+J5) lower shield * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Positions Row Type Pin length Part Numbers z – –/– a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 d A 8,25/3,7 176 e A 8,25/3,7 CHM-M-D-0001-1 * g A 8,25/3,7 h A 8,25/3,7 y – –/– z C 11,25/3,7 a A 8,75/3,7 b A 8,75/3,7 c A 8,75/3,7 g A 8,75/3,7 h A 8,75/3,7 y C 11,25/3,7 Male Connectors Type D Insertion Tool: Part Number 121586-5082 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z – –/– a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 d A 8,25/3,7 200 e A 8,25/3,7 CHM-M-E-0001-1 * g A 8,25/3,7 h A 8,25/3,7 y – –/– z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 c A 8,25/3,7 d A 8,25/3,7 250 e A 8,25/3,7 CHM-M-E-0002-1 * g A 8,25/3,7 h A 8,25/3,7 y C 11,25/3,7 Male Connectors Type E Insertion Tool: Part Number 121586-5086 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Positions Row Type Pin length Part Number 6 – – – CHM-M-L Male Connectors Type L 2) Option: Hole for additonal screw fixture

CHM 2.0 Connector System acc to IEC 61076-4-101 Assembly Drawing No. of Positions Row Type Pin length Part Numbers z – –/– a A 8,25/3,7 b A 8,25/3,7 55+3 c A 8,25/3,7 CHM-M-M-0AAAAA0-1* d A 8,25/3,7 CHM-M-M-0AAAAA0-2** e A 8,25/3,7 f – –/– z C 11,25/3,7 a A 8,25/3,7 b A 8,25/3,7 77+3 c A 8,25/3,7 CHM-M-M-CAAAAAC-1* d A 8,25/3,7 CHM-M-M-CAAAAAC-2** e A 8,25/3,7 f C 11,25/3,7 Male Connectors Type M 1) Press-fit holes for fixture pegs 2) Option: Hole for additional screw fixture /K35/K78 * Performance class I > 500 mating cycles ** Performance class II > 250 mating cycles

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Assembly Drawing No. of Positions Row Type Pin length Part Number 3 – – – CHM-M-N Male Connectors Type N 1) Press-fit holes for fixture pegs 2) Option: Hole for additional screw fixture

CHM 2.0 Connector System acc to IEC 61076-4-101 PCB thickness 3,2 – 4 mm 4,0 – 4,8 mm > 4,8 mm Shroud 14,95 mm 14,15 mm 13,35 Connector Type Part Numbers A CHM-S-A25-1 CHM-S-A25-2 CHM-S-A25-3 B CHM-S-B25-1 CHM-S-B25-2 CHM-S-B25-3 B-22 CHM-S-B22-1 CHM-S-B22-2 CHM-S-B22-3 B-19 CHM-S-B19-1 CHM-S-B19-2 CHM-S-B19-3 C CHM-S-C11-1 CHM-S-C11-2 CHM-S-C11-3 On request: other heights and special shrouds Shrouds for Male Connectors Type A, B, B-22, B-19 and C

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes PCB thickness 3,2 – 4 mm 4,0 – 4,8 mm > 4,8 mm Shroud 14,95 mm 14,15 mm 13,35 Connector Type Part Numbers AB-25 CHM-S-AB25-1 CHM-S-AB25-2 CHM-S-AB25-3 AB-22 CHM-S-AB22-1 CHM-S-AB22-2 CHM-S-AB22-3 AB-19 CHM-S-AB19-1 CHM-S-AB19-2 CHM-S-AB19-3 On request: other heights and special shrouds Shrouds for Male Connectors Type AB

CHM 2.0 Connector System acc to IEC 61076-4-101 Coding Devices CHM120230- 1236 CHM120230- 1248 CHM120230- 1356 CHM120230- 1567 CHM120230- 2578 CHM120230- 3456 CHM120230- 3467 CHM120230- 3478 CHM120230- 3568 CHM120230- 4678 CHM120230- 4578 CHM120230- 3567 CHM120230- 2478 CHM120230- 2348 CHM120230- 1346 CHM120230- 1278 CHM120230- 1258 CHM120230- 1256 CHM120230- 1247 CHM120230- 1235 Part Number Part Number Nut brown RAL 8011 Strawberry red RAL 3018 Telephony Spec. Blue lilac RAL 4005 Brillant blue RAL 5007 5,0 V C-PCI Reseda green RAL 6011 Cadmium yellow RAL 1021 3,3 V C-PCI Slate grey RAL 7015 Steel blue RAL 5011 Pastel orange RAL 2003 Ochre yellow RAL 1024 Colour 1236 1248 1356 1567 2578 3456 3467 3478 3568 4678 Code No. Nut brown RAL 8011 Strawberry red RAL 3018 Telephony Spec. Blue lilac RAL 4005 Brillant blue RAL 5007 5,0 V C-PCI Reseda green RAL 6011 Cadmium yellow RAL 1021 3,3 V C-PCI Slate grey RAL 7015 Steel blue RAL 5011 Pastel orange RAL 2003 Ochre yellow RAL 1024 Colour 4578 3567 2478 2348 1346 1278 1258 1256 1247 1235 Code No.Coding key Coding key Male connectors Female connectors

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Insertion Tools Type Part Number A/B (mm) A 121586-5081 -/13,6 D 121586-5082 -/16 Male Connectors Type C Male Connectors Type B, B-22, B-19, E Male Connectors Type A, D Type Part Number A/B (mm) C 121586-5087 - Type Part Number A/B (mm) B 121586-5083 50/13,6 B-22 121586-5084 44/13,6 B-19 121586-5085 38/13,6 E 121586-5086 50/19,6 Assembly Tools

CHM 2.0 Connector System acc to IEC 61076-4-101 Insertion Tools Male Connectors Type Compact PCI Female Connectors Flat Rock Pressfit Tool Male Connectors Flat Rock Tool Type Part Number A/B (mm) A, B, C 121586-5105 60/- PCI 121586-5106 94/- Type Part Number A/B (mm) C-PCI 121586-5080 - Type Part Number A/B (mm) A 121586-5097 50/13,6 B 121586-5098 50/13,6 B-22 121586-5099 44/13,6 B-19 121586-5100 38/13,6 C 121586-5101 25/13,6 C-PCI 121586-5102 94/13,6 D 121586-5103 50/19,6 E 121586-5104 50/19,6 Assembly Tools /K41 /K42

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Support Tools Male Connectors Type A, Compact PCI, D Support Block Male Connectors Type B, B-22, B-19, C, E Type Part Number A/B (mm) Univers 121586-5096 - Type Part Number A/B (mm) A 121586-5088 59/15 C-PCI 121586-5089 95/15 D 121586-5090 51/21 Type Part Number A/B (mm) A 121586-5091 50/15 B-22 121586-5092 44/15 B-19 121586-5093 38/15 C 121586-5094 25/15 E 121586-5095 50/21 Assembly Tools A B A B 35.1

CHM 2.0 Connector System acc to IEC 61076-4-101 Mounting and Repair Set Part Number 121586-5079 Coding Key Set Single Pin Extraction Tool Shroud Stripping Tool Assembly Tools

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Connector Order Number Index Order Number Page Order Number Page Order Number Page

CHM 2.0 Connector System acc to IEC 61076-4-101 Order Number Page Connector Order Number Index Order Number Page Tool Order Number Index Order Number Page

CHM 2.0 Connector System acc to IEC 61076-4-101 Dimensions are mm Subject to changes Product Safety Information THIS NOTE SHOULD BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOGUE. FAILURE TO OBSERVE THE ADVICE IN THIS INFOR- MATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOGUE COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by sepa- rating mated connectors as this may cause arcing, ionisation and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the Product Data Sheet/ Catalogue are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires, and leakage currents through carbonisation of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this catalog. Any use or application that deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in this catalog shall be construed to create any liability on the part of Cannon. Any new issue of this catalog shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of r epairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or r epair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This catalog is not be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. Cannon is a trademark of ITT Industries, Inc Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages can not be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Insulation resistance should be checked to make certain that no low resistance joints or spurious conducting path are existing between contacts and exposed metal parts of the connector body. Further the contact resistance of the connectors should be measured within the electrical circuit in order to identify high resistances which result in excessive connector heating. Always use the correct application tools as specified in the Data Sheet/Catalogue. Do not permit untrained personnel to wire, assemble or tramper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION. 1. Air and creepage paths/Operating voltage The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harness- ing. 2. Temperature All information given are temperature limits. The operation temperature depends on the individual application. 3. Other important information Cannon continuously endeavours to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalogue and data sheets. 4. Harnessing and Assembly Instructions If applicable, our special harnessing and/or assem- bly instruction has to be adhered to. This is provid- ed at request.

CHM 2.0 Connector System acc to IEC 61076-4-101 Company Phone Number First Name Last Name Fax Number Adress E-Mail Adress Signature Fax request Assembly reference: In order to be able to load the connectors economically we recommend a serial determination of the contact length. If only position 1 of a line is indicated, the entire line is loaded with this contact length. Exceptions can be registered at the respective position. Surface: Quality level 2 acc. to IEC 1076-4-101. Au over PdNi over Ni. Male-TypeB ACGJ HK MLP NQS RT

Cannon Worldwide Facilities Austria Afrikanergasse 3

1020 Vienna

FAX: (1) 2160948 PH: (1) 2160947 Benelux Rue Col. Bourg Str. 105A

1140 Brussels, Belgium

FAX: (02) 7269201 PH: (02) 726 75 94 NL China No. 24, 2 Block Taohuawu New District Zhenjiang, Jiangsu P .R.C. FAX: 86 511 4428616 PH: 86 511 443 3399 Denmark Park Allé 287 A

2605 Brøndby

FAX: 43 43 58 58 PH: 43 45 52 88 Finland Virkatie 1

1510 Vantaa

FAX:+358 9 70039188 PH: +358 9 70039180 France 2, Ave Sablons Bouillants, B.P . 133

77109 Meaux

FAX: (1) 64 33 16 82 PH: (1) 60 24 51 51 Germany Postfach 11 20, 71365 Weinstadt Cannonstrasse 1, 71384 Weinstadt FAX: (07151) 699217 PH: (07151) 699-0 Hong Kong

906 New World Office Building

West Wing, 20 Salisbury Road Tsim Sha Tsui, Kowloon FAX: (852) 2369-5651 PH: (852) 2732-2720 Italy Via Panzeri 10

20123 Milano

FAX: (02) 8372036 PH: (02) 581801 Japan 5362-1, 5-chome, Hibarigaoka Zama-shi, Kanagawa 228 FAX: 0462-57-1680 PH: 0462-57-2010 Korea 620, Changkang Bldg. #22, Dohwa-dong, Mapo-ku Seoul FAX: (02) 717 7330 PH: (02) 702 7111 Spain Edificio Italia 1a planta Parque Empresarial San Fernando San Fernando de Henares

28831 Madrid

FAX: (34) 1 656 15 83 PH: (34) 1 656 03 11 Sweden Norr Mälarstrand 64 Jaktvarvet 1

11235 Stockholm

FAX: (46) 8 650 0072 PH: (46) 8 650 0071 Switzerland Herzogenmühle 18

8304 Wallisellen

FAX: (01) 830-3104 PH: (01) 830-3888, 830-3613 United Kingdom Jays Close, Viables Estate Basingstoke Hampshire RG22 4BA FAX: (01256) 323356 PH: (01256) 311200 United States 666 E. Dyer Road Santa Ana, CA 92705-5612 FAX: 714.628.2142 PH: 714.557.4700 © 1999 ITT Industries, Cannon. Printed in Germany. All Rights Reserved. INTERNET http://www.ittcannon.com