DB20962

D20419-121 ITT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 28

Technical content

D sub:Layout 1 3/24/09 12:37 PM Page 1

www.ittcannon.com Cannon, VEAM, BIW A Historical Achievement ofTechnology Leadership Defining and Championing Innovation Showcasingaportfolioofcreativity,ITTʼs“EngineeredForLife”executionembracesproductswhichhavebe- comeubiquitousinabroadcollectionofmarketsincluding:Military/Aerospace,CivilAircraft,IndustrialInstru- mentation,Medical,Oil&Gas,Energy,Transportation,Telecom/Handset,Computer,Consumer,and Automotive. ITTʼsrichinterconnecthistoryembracescontributionstobothtechnologicalbreakthroughsandsocialmove- ments.Withoneoftheindustryʼsbroadestproductofferings,ITTʼsinterconnectproductshavesupported:

• EveryFreeWorldspacemission,bringingtheuniversetoourdoorstep.
• Motionpicture,radio,andtelevisionequipment,servinglaughterandentertainmenttomillions.
• Commercialandmilitarycommunicationssystems,linkingthevoicesoftheworld.
• Computerizedtools,reshapingtheinformationhighway.
• Aircraft,rapidtransit,andautomobiles,mobilizingourexpandingsociety.
• Oilandnaturalgasproduction,poweringtheworldʼseconomies.
• Agriculturalequipment,attackingtherootsofworldhunger. 1915 1920 1930 1940 1950 1960 1970 1980 The Beginning Charting the Future Power, Film, Commercial Aviation Military Telecom Space Medical, Transportation Growth Cannon partners with technology leaders to develop the first complete fiber optic systems Technology Leadership Lean manufacturing Internet deployed systems Pioneering technologies Engineered solutions Cannon pioneers guided missle umbilical connectors The first aviation circular & rack panel connectors developed by Cannon Cannon’s AF Firewall connectors used in early DC-3 transports Cannon develops the first Tri-Service connector, the mother of modern day military spec’s Cannon’s X connector is the first microminiature audio connector Cannon develops the first “Micro” connectors Cannon establishes an aviation milestone through the expansion of Rack and Panel connectors with the BKAD/E Series Cannon’s first entry into the Medical Electronics market Cannon originates the first “D-Sub” connectors +2000 Cannon creates “AN” military plugs Cannon creates “K” series connectors for DC-1’s First “Cannon Plug”

4 Pole Power

The first commercial and power connectors Cannon connectors made possible the first radio microphones, the first black and white television cameras as well as the first color television equipment. Cannon founded by James Cannon Cannon pioneers sound and film connectors with the M Series Breakaway Chip-on-Flex PHD Quadrax Stacking Photo courtesy of The Academy of Motion Pictures, Arts and Sciences. Inside front cvr & TOC:Layout 1 3/24/09 11:55 AM Page 1

Description

D Subminiature Accessories

• Metal Backshell
• Plastic Backshell
• Locking Hardware
• Guide Pin Plate
• Connector Saver
• Miscellaneous Table of ContentsCannon D Subminiature Accessories www.ittcannon.com NEW TOC:Layout 1 3/26/09 10:34 AM Page 1

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Selection Guide L Supplied with backshell

• Optional compatible locking hardware — Not compatible Locking Hardware Sliding Lock Female Screw Lock Male Screw Lock Retainer Slide Lock Post Spring Latch Plate Spring Latch Backshell Style see page 14 see page 13 see page 15 see page 15 see page 16 see page 16 EMI Shielded Snap-Together Metalized Plastic see page 9 EMI Shielded Snap-Together Metalized Plastic see page 9 EMI Shielded Die Cast Zinc see page 4 Metal Metal Backshell see page 4 Metal Deep Straight see page 7 Metal Round Cable see page 7 Metal Short Straight see page 8 see page 8 Plastic Snap-Together see page 11 Plastic One-Piece see page 11 Plastic One-Piece Plastic see page 12 Plastic One-Piece Plastic see page 12 D sub:Layout 1 3/24/09 12:37 PM Page 2

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Selection Guide Locking Hardware Jackpost for Jackscrew Assembly Jackpost Assembly Recessed Jackscrew Extended Jackscrew Thumbscrew In-Line Connections see page 17 see page 17 see page 10 see page 10 see page 10 see page 10 D sub:Layout 1 3/24/09 12:37 PM Page 3

www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Metal Backshell B 9 and 15 Position Position 37 and 50 Position B B CC E Dia. E Dia. E Dia. A A A F D D D F F 4 4 2 2 9 and 15 Position* 25 Position* 37 and 50 Position* Die Cast Zinc Backshell, Straight Exit, EMI Shielded Die cast metal backshells reduce EMI/RFI emis- sions. Die cast metal backshells offer improved shielding in a rugged package. Compression inserts accommodate a wide variety of cable sizes. db -10 -20 -30 -40 -50 -60 -70 100 1000Mhz Diecast Shell Shielding Performance Product Features

• Improves conformance to FCC DOC #20780 shielding requirements
• No crimp ferrule tooling needed
• Kit consists of 1 front shell, 1 rear shell, 2 screws, 2 hex nuts, 2 mounting screws, 2 end brackets, 1 set of compression inserts Attenuation Compression inserts (included with die cast zinc metal backshell) Specifications Attenuation: -50 dB @ 1000MHz Temperature Range: -20º C to 80º C Position Cable Diameter Shell Part ABC D øE F Materials and Finishes Backshell Material: Zinc Backshell Finish: Clear Zinc Compression Inserts:PVC Hardware Material: Steel Hardware Finish: Clear Zinc * Inserts may be supplied mirror image. D Cannon D-Subminiature Accessories D sub:Layout 1 3/24/09 12:37 PM Page 4

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Metal Backshell Straight Exit The new Cannon Metal Backshells D*FM seriesfor D-Subminiature Connectors offers protection from magnetic and radio interferences to cable assemblies. This backshell series is characterized by simple assembly and fit forndustrial and telecom applications. PPrroodduucctt FFeeaattuurreess::

• No crimp ferrule tooling needed
• Material: Zinc, blue chromated
• Unique metal filled plastic cable strain relief guarantees 360° shielding
• RoHS compliant
• -40 - +120°C temperature range
• Corrosion resistant SSiizzee 1155 AAtttteennuuaattiioonn ccuurrvvee DEFME-101 DEFMX-101 Size 9 39,55mm [1.555inch]31,3mm [1.232inch] 14,6mm [0.575inch] 25,0mm [0.984inch] 4 - 9mm DAFME-101 DAFMX-101 Size 15 41,7mm [1.642inch] 39,3mm [1.547inch] 14,6mm [0.575inch] 33,3mm [1.311inch] 4 - 9mm DBFME-101 DBFMX-101 Size 25 49,0mm [1.929inch] 53,5mm [2.106inch] 14,6mm [0.575inch] 47,0mm [1.850inch] 4 - 9mm DCFME-101 DCFMX-101 Size 37 53,3mm [1.098inch] 69,7mm [2.744inch] 14,6mm [0.575inch] 63,5mm [2.500inch] 4 - 9mm Part DescriptionPart Description With #4-40 UNC With M3 Shell ABC D Cable Jackscew Jackscrew Size Diameter Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, and 2 jack screws. AAsssseemmbbllyy iinnssttrruuccttiioonnss SSiizzee 99 ,, 1155,, 2255 ,, 3377 Use two halves of strain relief (different sizes can be mixed) Strip cable 18mm and shape cable to two pigtails Attach the strain relief around the cable Bend cable shielding back on outside of strain relief Mount connector and cable into the backshell Assemble the other half (screwing force: 100-120 Ncm) Metal Backshell D sub:Layout 1 3/26/09 7:52 AM Page 5

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Metal Backshell Metal Backshell 45° Exit The new Cannon Metal Backshells D*FM seriesfor D-Subminiature Connectors offers protection from magnetic and radio interferences to cable assemblies. This backshell series is characterized by simple assembly and fit for Industrial and telecom applications. PPrroodduucctt FFeeaattuurreess::

• No crimp ferrule tooling needed
• Material: Zinc, blue chromated
• Unique metal filled plastic cable strain relief guarantees 360° shielding
• RoHS compliant
• -40 - +120°C temperature range
• Corrosion resistant SSiizzee 1155 SSiizzee 5500 AA tttteennuuaattiioonn ccuurrvvee DEFME-100 DEFMX-100 Size 9* 37,5mm [1.476inch] 35,5mm [1.398inch] 14,6mm [0.575inch] 4 - 9mm DAFME-100 DAFMX-100 Size 15 41,5mm [1.634inch] 39,5mm [1.555inch] 14,6mm [0.575inch] 33,3mm [1.311inch]4 - 9mm DBFME-100 DBFMX-100 Size 25 41,5mm [1.634inch] 53,5mm [2.106inch] 14,5mm [0.571inch] 47,0mm [1.850inch] 4 - 9mm DCFME-100 DCFMX-100 Size 37 41,5mm [1.634inch] 70,0mm [2.756inch] 14,5mm [0.571inch] 63,5mm [2.500inch] 4 - 9mm DDFME-100 DDFMX-100 Size 50* 45,0mm [1.772inch] 67,5mm [2.657inch] 17,4mm [0.69inch] 61,0mm [2.402inch] 13-16mm Part DescriptionPart Description With #4-40 UNC With M3 Shell ABC D Cable Jackscew Jackscrew Size Diameter *Size 9 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 1 jack screw Size 15, 25, 37 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 2 jack screws *Size 50 Backshell: Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 4 mounting crosshead screws, 2 jack screws AA sssseemm bbllyy iinnssttrruuccttiioonnss SSiizzee 99 ,, 11 55,, 2255,, 3377 Use two halves of strain relief (different sizes can be mixed) Strip cable 18mm and shape cable to two pigtails Attach the strain relief around the cable Bend cable shielding back on outside of strain relief Mount connector and cable into the backshell Assemble the other half (screwing force: 100-120 Ncm) D sub:Layout 1 4/1/09 10:23 AM Page 6

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Metal Backshell C A E CABLE ENTRY IN SHELL CABLE ENTRY IN SHELL H MAX. G D MAX. 0,38 ± 0,13 (.015 ± .005) 3,45 ± 0,13 (.136 ± .005) TWO MTG. HOLES B F + + 0,38 ± 0,13 (.015 ± .005) F G D MAX. 3,05 ± ,013 (.120 ± .005) DIA. TWO MTG. HOLES A C E B CABLE ENTRY Metal Backshell Shell Part Mil Spec AB C D E F G H * Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix. Shell Part Mil Spec ABC D E F G * Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix. Metal Backshells provide strain relief. Various profiles available for different cable rout- ing requirements.

• Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts. Deep Straight Clamp
• Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts. Round Cable Clamp Materials and Finishes Backshell Material: Low Carbon Steel or Brass Backshell Finish: Chromate over Cadmium (Mil Spec) or Zinc (RoHS) Hardware Material: SteelProduct Features Qualified to MIL-Spec M85049 Mil-Spec Parts (Brass) Brass Shell RoHS Compliant Mil-Spec 50 µ in. Gold Size Part Number Part Number Part Number over Copper DE DE24657-29 M85049/48-1-6F DE24657-5 DE24657-16 DA DA24658-28 M85049/48-1-7F DA24658-2 DA24658-15 DB DB24659-27 M85049/48-1-8F DB24659-2 DB24659-15 DC DC24660-27 M85049/48-1-9F DC24660-11 DC24660-16 DD DD24661-27 M85049/48-1-10F DD24661-4 DD24661-13 Mil-Spec Parts (Brass) Brass Shell RoHS Compliant Mil-Spec 50 µ in. Gold Size Part Number Part Number Part Number over Copper DE DE44994-14 M85049/48-2-6F DE44994-3 DE44994-2 DA DA20961-26 M85049/48-2-7F DA20961-3 DA20961-16 DB DB20962-30 M85049/48-2-8F DB20962-8 DB20962-18 DC DC20963-27 M85049/48-2-9F DC20963-8 DC20963-17 DD DD20964-32 M85049/48-2-10F DD20964-8 DD20964-19 D sub:Layout 1 3/24/09 12:37 PM Page 7

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change TWO MTG. HOLES F (TYP.) A C B E CABLE ENTRY 0,38 ± 0,13 (.015 ± .005) G 12,30 ± 0,38 (.484 ± .015) B A C #4-40 NC-2B THD. TWO MTG. HOLES E CABLE ENTRY F CABLE ENTRY 2,77 ± 0,25 (.109 ± .010) G H Short Straight Clamp

• Kit consists of 1 shell, 2 or 3 screws, 2 or 3 hex nuts No. of Shell Part Mil Spec Cable Locking AB C E F G * Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix. 90º Entry
• Kit consists of 1 shell, 1 cable clamp, 1 screw, 1 nut, 2 rivnuts (assembled) Shell Part Mil Spec AB C E F G H * Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix. Mil-Spec Parts (Brass) Brass Shell RoHS Compliant Mil-Spec 50 µ in. Gold Size Part Number Part Number Part Number over Copper DA DA19678-212 M85049/48-3-7F DA19678-38 DA19678-167 DB DB19678-213 M85049/48-3-8F DB19678-53 DA19678-168 DC DC19678-214 M85049/48-3-9F DC19678-85 DA19678-138 DD DD19678-214 M85049/48-3-10F DD19678-55 DA19678-161 Mil-Spec Parts (Brass) Brass Shell RoHS Compliant Mil-Spec 50 µ in. Gold Size Part Number Part Number Part Number over Copper DE DE19977-72 M85049/50-6F DE19977-20 DE19977-47 DA DA19977-68 M85049/50-7F DA19977-6 DE19977-40 DB DB19977-69 M85049/50-8F DB19977-17 DE19977-43 DC DC19977-70 M85049/50-9F DC19977-18 DE19977-45 DD DC19977-71 M85049/50-10F DD19977-19 DE19977-44 Metal Backshell D sub:Layout 1 3/24/09 12:37 PM Page 8

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change CABLE CLAMP CABLE GROUNDING TANG 16,99±0,30 (.669±.012) C B D E ØH MAX A D E Snap-Together Metalized Plastic Metalized plastic backshells reduce EMI/RFI emis- sions. Metalized plastic provides a light weight solu- tion. Includes integral strain relieving cable clamp. dB kHz MHz MHzMHz Product Features

• Improves conformance to FCC DOC #20780 shielding requirements
• No crimp ferrule tooling needed
• Quick and simple assembly using snap- together design feature
• Non-metalized, non-shielded versions available AAtttteennuuaattiioonn CCuurrvvee Straight Exit 50º Exit Note: Cable grounding tang not available on DE size backshell. Specifications Attenuation: -49 dB @ 100MHz Temperature Range: -20º C to 80º C Shell Comptuer Cable Ribbon Cable ABC D E øH Shell Shielded Non-Shielded BC DE Cable Diameter Materials and Finishes Material: Thermoplastic, UL 94V-0 rated Finish: Nickel over Copper
• Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws
• Optional locking hardware sold separately, see page 10
• Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws
• Optional locking hardware sold separately, see page 5 Plastic Backshell D sub:Layout 1 3/26/09 7:52 AM Page 9

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Plastic Backshell 13,50 (.531) 4,50 (.177) DIA. 9,00 (.354) #4-40 Threads 6,00 (.236) MIN. 19,00 (.748) 4,30 (.169) 9,00 (.354) 4,10 (.161) DIA. #4-40 Threads 50,00 (1.969) 6,00 (.236) #4-40 THREADS6,00 (.236) MIN. Locking Hardware for Snap -Together Plastic Backshell 5,00 (.197) 5,00 (.197) 1,81 (.075) 6,00 (.236) 4,60 (.189) #4-40 UNC-2B 11,00 (.433) 6,00 (.236) 4,90 (.193) 3,00 (.118) MIN #4-40 UNC-2A #4-40 UNC-2B 5,00 (.197) (ACROSS FLATS) Jackpost for In-Line Connections Recessed Jackscrew Extended Jackscrew Thumbscrew Rectangular Nut Jackp ost Jackpost Assembly Part Number: D121073-19 Material: Brass Finish: Nickel Quantity required per connector: 2 Assembly consists of 1 rectangular nut, 1 jackpost, 1 # 4-40 lock washer. Materials and Finishes Part Number Material Finish Quantity Required per Connector 250-8501-004 Brass Nickel 2 250-8501-009 (M3) ,250-8501-010 (#4-40) Brass Nickel 2 250-8501-013 Brass Nickel 2 Straight Exit - Metalized Plastic Low Cost Shell Part ABC D ø E F SizeLayout Number

• Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws

50 POSITION IS MARKED

“CANNON” ONLY B A ITT CANNON C D ØE F Materials and Finishes: Thermoplastic, UL 94V-0 rated, Nickel plated D sub:Layout 1 3/24/09 12:37 PM Page 10

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change C B DIA. MAX. CABLE ENTRY 39,50 (1.555). D 42,50 (1.673). ITT CANNON A C CLAMP, THERMOPLASTIC CLAMP, METAL E 48,00 (1.890) D 16,21 (.638) Snap -Together Universal

• 2-piece snap-together design for quick assembly.
• Customer furnishes tie-wrap. Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated
• Low cost
• Easy to assemble
• Mounting hardware included
• 2 thumbscrews, 2 cable clamps Materials and Finishes Backshell Material: Polypropylene Hardware Material: Steel Hardware Finish: Black Nickel Shell Part øB CD Size Layout Number max. ±0,20 (.008) ±0,20 (.008) DE 9 DE115339-20 7,01 (.276) 17,00 (.669) 19,51 (.768) DA 15 DA115339-21 9,60 (.378) 17,00 (.669) 27,79 (1.094) DB 25 DB115339-22 11,61 (.457) 17,00 (.669) 41,61 (1.638) DC 37 DC115339-23 13,00 (.512) 17,00 (.669) 59,99 (2.283) DD 50 DD115339-24 16,00 (.630) 19,81 (.780) 52,32 (2.060) Note: Part Numbers above replace the following part number series: DE110963-1 to DD110963-5 Shell Part ø D Size Layout Number AC max. E One-Piece Snap-Together Plastic Backshell D sub:Layout 1 3/24/09 12:37 PM Page 11

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Plastic Backshell TWO SCREWS 4-24 X 5/16 long SELF-TAPPING B C A Cable Entry D F Cable Entry ø E G Cable Entry A C B D J K Cable Entry ø H Cable Entry One-Piece Plastic Straight Exit 90º Exit

• Kit consists of 1 shell, 1 cable clamp, 1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping
• Accommodates spring latches Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Hardware Material: Steel Hardware Finish: Chromate over Zinc
• Kit consists of 1 shell, 1 cable clamp, 1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Hardware Material: Steel Hardware Finish: Chromate over Zinc Shell Part ABC D øE FG Shell Part ABC D øH JK D sub:Layout 1 3/24/09 12:37 PM Page 12

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Locking Hardware NUTMOUNTING PANEL HEX NUT LOCK WASHER WASHER NUT CLIP WITH THREAD SCREW MOUNTING PANEL D SUBMINATURE CONNECTOR PIN OR SOCKET HEX NUT LOCK WASHER CLIP WITH THREAD SCREW D SUBMINATURE CONNECTOR PIN OR SOCKET D SUBMINATURE CONNECTOR PIN OR SOCKET WASHER C CLIP GAP CLIP B SCREW #4-40 UNC-2A THD A Screw Lock Assemblies

• Kit consists of 1 screw and 1 clip
• Order 2 per connector
• Similar to M24308/25 ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Product Features
• Ensures positive mating
• Provides locking and latching for high vibration applications Materials and Finishes Material: Steel Finish: Trivalent Chromate over Zinc Male Screw Lock Front Panel Mount Rear Panel Mount Shell each 2 each AB C RoHS Compliant RoHS Compliant Size P/N P/N ±0,38(.015) ±0,2 (.010)±0,13 (.005) P/N each P/N 2 each DE, DA, DB, DC D20419 D20419-119 14,10 (.555) 6,35 (.250) 1,22 (.048) D20419-211 D20419-218 DE, DA, DB, DC D20419-18 D20419-121 14,10 (.555) 7,14 (.281) 1,70 (.067) D20419-212 D20419-219 DE, DA, DB, DC D20419-21 D20419-122 14,10 (.555) 7,14 (.281) 2,34 (.092) D20419-213 D20419-220 DE, DA, DB, DC D20419-104 D20419-216 14,10 (.555) 7,92 (.312) 2,34 (.092) D20419-214 D20419-221 DD D20420 D20420-097 16,66 (.656) 6,35 (.250) 1,22 (.048) D20420-157 D20420-163 DD D20420-13 D20420-099 16,66 (.656) 7,14 (.281) 1,70 (.067) D20420-158 D20420-164 DD D20420-15 D20420-100 16,66 (.656) 7,14 (.281) 2,34 (.092) D20420-159 D20420-165 DD D20420-86 D20420-162 16,66 (.656) 7,92 (.312) 2,34 (.092) D20420-160 D20420-166 D sub:Layout 1 3/26/09 7:52 AM Page 13

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Locking Hardware 4,78 ± 0,38 (.188 ± .015) Hex across Flats #4-40 NC-2B THD. 6,35 (.250) APPROX. REMOVE ONE WASHER FOR EACH 0,76 (.030) OF PANEL THICKNESS WHEN REAR MOUNTING 1,52 (0.60) MAX. PANEL REAR FLANGE (REF.) #4-40 NC-2A THD A4,78 ± 0,38 (.188 ± .015) 5,00 (.197) HEX (ACROSS FLATS) 3,50 (.138) MIN4,50 (.177) 5,75 (.226) THD A THD B 3,50 (.138) MIN

• Kit consists of 1 nut, 3 washer, 1 lock washer, 1 hex nut.
• Order 2 per connector. Female Screw Lock Front Panel Mount Rear Panel Mount NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors. Material: Steel Finish: Chromate over Cadmium (Mil Spec) or Zinc (RoHS) Yellow Chromate Over Cadmium Chromate Over Zinc RoHS Compliant A Mil-Spec each Kit of 2 each Kit of 2 each Part Number ± 0,38 (.015) Part Number D20418-2 D20418-82 D20418-128 D20418-134 7,92 (.312) M24308/26-1F D20418-50 D20418-131 - D20418-135 12,70 (.500) - D20418-39 D20418-83 D20418-129 D20418-136 15,88 (.625) M24308/26-2F D20418-74 D20418-132 - D20418-137 19,05 (.750) - Part Thread Type Number THD A THD B D121073-39 # 4-40 UNC-2B # 4-40 UNC-2A D112041 * # 4-40 UNC-2B # 4-40 UNC-2A D121073-42 M3 M3 * without lock washer Screw Locks for Connectors with Integral Threaded Inserts
• Kit consists of 1 jackpost, 1 lock washer.
• Order 2 per connector. .120 .116 .192 .182 A Loose Spacer Dim A Part Number: 253-0343-000 (D*M Style) 5.84 ± .08 (.230 ± .003) Part Number: 253-0343-011 (D*MA Style) 9.40 ± .13 (.370 ± .005) Material: Aluminum Finish: Chromate over Cadmium D sub:Layout 1 4/1/09 10:23 AM Page 14

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Locking Hardware LOCK WASHER SLIDE LATCH #4-40 SCREW #4-40 POST FLAT WASHERS LOCK WASHER #4-40 HEX. NUT HEX NUT

2 SCREWS

#4-40 NC-2A THREAD 2,84 (. 112) 3,66 ± 0,38 (.144 ± .015) 2,36 (.093) TRAVEL REF. A C B RETAINER SLIDING LOCK Slide Lock Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Product Features

• Ensures positive mating
• Provides locking and latching for high vibration applications
• Kit consists of 1 sliding lock plate, 2 mounting screws, 2 lock washer, 2 hex nuts
• Order 1 kit per connector Sliding Lock Retainer Assembly Finish/ Descriptions Material Treatment Sliding Lock Plate Stainless SteelPassivated Screw, Mounting Steel Washer Lock Steel Nut, Hex Steel Shell Part AB C Size Layout Number ± 0,38 (.015) ± 0,38 (.015)± 0,13 (.005) DE 9 DE51224-1 35,05 (1.380) 12,70 (.500) 25,00 (.984) DA 15 DA51220-1 43,70 (1.720) 12,70 (.500) 33,32 (1.312) DB 25 DB51221-1 57,40 (2.260) 12,70 (.500) 47,04 (1.852) DC 37 DC51222-1 73,86 (2.908) 12,70 (.500) 63,50 (2.500) DD 50 DD51223-1 71,47 (2.814) 15,47 (.609) 61,11 (2.406) Trivalent Chromate over Zinc SPACER WASHER LOCK WASHER #4-40 HEX NUT HEX 2,59 (.102) ± 0,13 (.005) 10,57 (.416) ± 0,25 (.010) 4,60 (.180) Slide Lock Post Assemblies
• Consists of 1 post, 2 washers, 1 lock washer, and 1 hex nut.1
• Order 2 per connector.2 NOTE: When rear-mounting connector to a 1/16” panel, delete the second spacer washer. Part Number: D53018 D53018-11 Material: Steel, Finish: Chromate/Zinc D53018-14 D53018-20 Material: Stainless Steel, Finish: Passivated Each1,2 Kit of 2 each D sub:Layout 1 3/26/09 7:52 AM Page 15

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Locking Hardware 15,37 ± 0,64 (.605 ± .025) LONG SCREW #4-40 HEX. NUT 2,41 (.095) - 1,52 (.060) #4-40 SCREW LATCH PLATE CONNECTOR EITHER PIN OR SOCKET LOCK WASHER #4-40 HEX NUT A B B A 15,57 ± 0,64 (.613 ± .025) LONG SCREW 2,41 (.095) C #4-40 SCREW SPRING LATCH MOUNTING BRACKET CONNECTOR EITHER PIN OR SOCKET LOCK WASHER #4-40 HEX. NUT SPRING LATCH Unlocked Locked Spring Latch Plate Assembly Spring Latch Assembly Spring Latch Assemblies Materials and Finishes Material: Stainless Steel Treatment: Passivated ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells.

• Kit consists of 1 plate, 1 screw, 1 lock washer,1 hex nut.
• Order 2 kits per connector.
• Kit consists of 1 spring, 1 screw, 1 bracket, 1 lock washer, 1 hex nut.
• Order 2 kits per connector. Front panel mounting. Product Features
• Low Cost
• Minimizes field connection time
• Positive lock between connectors
• Packaged 2 kits per bag Shell Part AB Part Number Size Layout Number ± 0,38 (.015) ± 0,38 (.015) Kit of 2 each DE, DA, DB, DC 9,15, 25, 37 D110278 12,42 (.489) 14,35 (.565) D110278-4 DD 50 D110280 15,47 (.609) 17,09 (.673) D110280-3 Shell Part ABC Part Number Size Layout Number ± 0,38 (.015)± 0,38 (.015)± 0,51 (.020) Kit of 2 each DE, DA, DB, DC 9,15, 25, 37D110277 12,42 (.489) 14,35 (.565) 18,59 (.732) D110277-2 DD 50 D110279 15,47 (.609) 17,09 (.673) 18,59 (.732) D110279-3 D110277-4 Rear panel mount version also available D sub:Layout 1 3/24/09 12:37 PM Page 16

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change 4,75 (.187) HEX (ACROSS FLATS) CONNECTOR ASSY #4-40 UNC THREAD 14,10 (.555) ± 0,13 (.005) 5,59 (.220) MIN. PERFECT THD. 1,14 (.045) ± 0,13 (.005) PANEL 3,18 (.125) MAX. LOCK WASHER HEX NUT #4-40 UNC THREAD #4-40 UNC THREAD 5,59 (.220) DIA. MAX. 0,64 (.025) ± 0,13 (.005) 4,57 (.180) MAX. 16,26 (.640) MAX. 1,73 (.068) MAX. 9,40 (.370) MAX. 5,59 (.220) DIA. MAX. 0,89 (.035) ± 0,13 (.005) Jackscrew/Jackpost Assemblies Part Number: D110550 Materials and Finishes Material: Stainless Steel Treatment: Passivated

• Kit consists of 2 studs, 2 heads, 1 tube retaining compound (US only)
• Order one kit per connector Part Number: D110551 Materials and Finishes Material: Stainless Steel Treatment: Passivated
• Kit consists of 2 posts, 2 hex nuts, 2 lock washer
• Order one kit per connector Jackpost Assembly Jackpost Assembly Jackscrew Assembly Jackscrew AssemblyITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. NOTE: Jack post is not compatible with rear-panel mount connectors. FEMALE POST STUD, JACKSCREW # 2-56 UNC THD Ø 3,05 (.120) #4 HEX NUT WASHER, #4 LOCK # 4-40 UNC-2A THD # 4-40 UNC-2B THD # 4-40 UNC THD HEAD, JACKSCREW RETAINING COMPOUND Ø 3,05 (.120) Locking Hardware D sub:Layout 1 3/24/09 12:37 PM Page 17

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Guide Pin Plate MOUNTING PANEL 9,60 (.378) MAX 1,57 SOLDER POT EXTENSION A B F E F G C D 4,04 (.159) DIA. MIN.

2 PLACES

#4.40 UNC-2B THREAD (SCREW SUPPORT) 1,60 (.063) ± 0,41 ± (.016) RAD.

4 PLACES

+ ++ 4,22 ± 0,05 (.166 ± .002) DIA. B E F J H D F K RADIUS 3,66 ± 0,13 (.144 ± .005) DIA. Shell Part ABC D E F G HJK Guide Pin Plate Female Recommended Panel Cutout Plate and Hardware Material:Steel Plate and Hardware Finish:Chromate over Zinc

• Useful in blind mate applications.
• Kit consists of 1 plate, 2 screws.
• Guide pin inserts for Size 8 cavities for Combo D ® connectors also available. Refer to Combo D Catalog. D sub:Layout 1 3/24/09 12:37 PM Page 18

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Shell Part ABC D E F G HJK 4,78 ± 0,30 (.188 ± 0.12) 6,35 (.250) MAX SOLDER POT EXTENSION 4,01 (.158) DIA. MAX. 1,57 (.062) MAX. 4,06 (.160) REF DIA MAX. 1,57 ± 0,13 (.062 ± .005) 8,71 ± 0,38 (.875 ± .030) 4,06 ± 0,25 (.160 ± .010) A B C D ITT CANNON EF G 3,66 ± 0,13 (.144 ± .005) + +++ + 3,66 ± 0,13 DIA. (.144 ± .005) 5,54 ± 0,13 DIA. (.218 ± .005) K RADIUS B C D J HF C L Recommended Panel Cutout Guide Pin Plate Male Plate and Hardware Material:Steel Plate and Hardware Finish:Chromate over Zinc Guide Pin Material: Stainless Steel

• Useful in blind mate applications.
• Kit consists of 1 plate, 2 sems screws, 2 rivets, 2 guide pins, 2 washer
• Guide pin inserts for Size 8 cavities for Combo D ® connectors also available. Refer to Combo D Catalog. Guide Pin Plate D sub:Layout 1 3/24/09 12:37 PM Page 19

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Connector Saver 5,97 ± 0,25 (.235 ± .010) CONTACT (PIN) SHELL PIN FRONT SHELL SOCKET FRONT CONTACT (SOCKET) 6,17 ± 0,25 (.243 ± .010) 21,95 ± 0,51 (.864 ± .020)A B C 2X 11˚ SPACER High Reliability Connector Saver Specifications Materials and Finishes NOTE: Hardware removed for clarity. Shell Part AB C Size Layout Number ± 0,40 (.015) ± 0,25 (.010)± 0,25 (.010) DE 9 DEBMAM9PS 30,81 (1.213) 24,99 (.984) 16,92 (.666) DA 15 DABMAM15PS 39,14 (1.541) 33,32 (1.312) 25.25 (.994) DB 50 DBBMAM25PS 53,04 (2.088) 47,04 (1.852) 38,96 (1.534) DC 37 DCBMAM37PS 69,32 (2.729) 63,50 (2.500) 55,42 (2.182) DD 50 DDBMAM50PS 66,93 (2.635) 61,11 (2.406) 52,81 (2.079) Temperature: -55º C to 105º C Current Rating: 7 A Dielectric withstanding Voltage: 500 VAC at Sea Level Description Material Finish Shells Steel Yellow Chromate over Zinc Insulator White Thermoplastic, UL 94V-0 — Contacts Copper Alloy Gold Over Copper Locking Hardware Stainless Steel Passivated Engaging Face, Pin Side D sub:Layout 1 3/24/09 12:37 PM Page 20

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Polarizing Plates Part Number AB by Shell Size DE 115398 1.208 (30.7) 0.629 (16) DA 115398-1 1.535 (39,0) 0.629 (16) DB 115398-2 2.082 (52,9) 0.629 (16) DC 115398-3 2.726 (69,2) 0.629 (16) DD 115398-3 2.630 (66,8) 0.749 (19) Right Angle Brackets (Used with 90º Printed Circuit Connector D*M, D*, D*C,/D*U) Shell Part AB C D E F D*/D*M Shell Part AB C D E F D*C/D*U Material: Black plastic, 94-V-O rated A HGFEDCBPolarizing Keys Position 1 Cut Key on pin connector Cut Key on socket connector Polarizing Scheme Wire Hole Fillers (D*MA Series Only) Part Number Insert Type DMA 51236-1 Socket DMA 51235-1 Pin Material: Nylon Pin Socket Insert this end first From Terminal end of Connector Miscellaneous Material: Black Polyester, UL-94V-0 Rated D sub:Layout 1 3/24/09 12:37 PM Page 21

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change RAISED GATE MARK R. TYP. B A B D 6,35 (.250) C 1,02 .04 WALL TYP. ITT CANNONXX-XX-XX 10˚ TYP. 0,79 + 0,38 - 0.00 B A ø 0,91 +_ 0,18 (.036 +_ .007) DIA. TYP. + + 3,25 (.128) DIA. 15,20 (.600) Potting Shell I.D. AB C D DA-59-20BA DA-59-20RC Socket 28,45 (1.120) 11,68 (.460) 24,59 (.968) 7,62 (.300) DB-59-20BA DB-59-20RC Socket 42,42 (1.670) 11,68 (.460) 38,25 (1.506) 7,49 (.295) DC-59-20BA DC-59-20RC Socket 58,93 (2.320) 11,68 (.460) 54,81 (2.158) 7,37 (.290) DD-59-20BA DD-59-20RC Socket 56,90 (2.240) 14,48 (.570) 53,11 (2.091) 10,41 (.410) Dust Cap Interfacial Seal Dust caps provide protection from moisture and dust for unused I/O ports. Product Features

• Dust Caps meet the static decay test requirements of MIL-B- 81705C, Type II.
• Dust Caps have an integral flange for easy application and removal Interfacial seals provide moisture resistance at the mating interface. Product Features
• Other Interfacial Seals in the Combo D® layouts are available upon request. Materials and Finishes Material: Polyethylene Material: Silastic Sheet Potting shells are molded with a thin flange 0,76 (.030) to permit the use of D Subminiature locking devices. Materials and Finishes Material: Nylon Color: Natural (white) NOTE: C dim. applies at point of maximum Integral interface length.Drawing shown for Black Anti-static caps. Dimensions shown are reference only. Shell Size Layout Part Number AB DE 9 DE53750 16,66 (.656) 8,41 (.331) DA 15 DA53750-1 24,99 (.984) 8,41 (.331) DB 25 DB53750-2 38,88 1.531) 8,41 (.331) DC 37 DC53750-3 55,14 (2.171) 8,41 (.331) DD 50 DD53750-4 52,78 (2.078) 11,10 (.437) DC 21WA4 075-0354-003 55,14 (2.171) 8,41 (.331) DE 15 273-0333-000 16,66 (.656) 8,41 (.331) DA 26 273-0334-000 24,99 (.984) 8,41 (.331) DB 44 273-0335-000 38,88 1.531) 8,41 (.331) DC 62 273-0336-000 55,14 (2.171) 8,41 (.331) DD 78 273-0337-000 52,78 (2.078) 11,10 (.437) Shell Size Layout Part Number DE 9 DE50904-1 DA 15 DA50905-1 DB 25 DB50906-1 DC 37 DC50907-1 DD 50 DD50908-1 Miscellaneous Black Antistatic (Surface Resistivity <1x105 ohm/sq) (Surface Resistivity 105-1012 ohm/sq) Red Caps D sub:Layout 1 4/10/09 11:43 AM Page 22

D Cannon D-Subminiature Accessories www.ittcannon.com Dimensions shown in mm (inch) Specifications and dimensions subject to change Index 075-0354-003 Same 22 250-8501-004 Same 5 250-8501-009 Same 5 250-8501-010 Same 5 250-8501-013 Same 5 273-0333-000 Same 22 273-0334-000 Same 22 273-0335-000 Same 22 273-0336-000 Same 22 273-0337-000 Same 22 980-2000-345 Same 6 980-2000-346 Same 6 980-2000-347 Same 6 980-2000-348 Same 6 980-2000-350 Same 12 980-2000-351 Same 12 980-2000-352 Same 12 980-2000-353 Same 12 980-2000-354 Same 12 D110277 Same 16 D110278 Same 16 D110279 Same 16 D110280 Same 16 D110550 Same 17 D110551 Same 17 D121073-19 Same 5 D121073-39 Same 14 D121073-42 Same 14 D20418-2 D20418-134 14 D20418-39 D20418-136 14 D20418-50 D20418-135 14 D20418-74 D20418-137 14 D20419 D20419-211 13 D20419-104 D20419-214 13 D20419-18 D20419-212 13 D20419-21 D20419-213 13 D20420 D20420-157 13 D20420-13 D20420-158 13 D20420-15 D20420-159 13 D20420-86 D20420-160 13 D53018 Same 15 DA115339-21 Same 11 DA121073-150 Same 4 DA121073-50 Same 4 DA19678-1 DA19678 -212 10 DA19977-1 DA19977-68 10 DA20961 DA20961-26 9 DA22213 Same 19 DA22214 Same 18 DA24658 DA24658-28 9 DA50905-1 Same 22 DA51210 Same 12 DA51211 Same 12 DA51220-1 Same 15 DA53750-1 Same 22 DA-59-20 Same 22 DA-60-20 Same 22 DABMA15PS Same 20 DABS-15 Same 11 DB115339-22 Same 9 DB121073-151 Same 4 DB121073-51 Same 4 DB19678-2 DB19678-213 10 DB19977-2 DB19977-69 9 DB20962 DB20962-30 10 DB22254 Same 18 DB22255 Same 19 DB24659 DB24659-27 9 DB50906-1 Same 22 DB51212 Same 12 DB51213 Same 12 DB51221-1 Same 15 DB53750-2 Same 22 DB-59-20 Same 22 DB-60-20 Same 22 DBBMA25PS Same 20 DBBS-25 Same 11 DC115339-23 Same 11 DC121073-152 Same 4 DC121073-52 Same 4 DC19678-3 DC19678-214 9 DC19977-3 DC19977-70 9 DC20963 DC20963-27 9 DC22070 Same 19 DC22071 Same 18 DC24660 Same 7 DC50907-1 Same 22 DC51214 Same 12 DC51215 Same 12 DC51222-1 Same 15 DC53750-3 Sa me 22 DC-59-20 Same 22 DC-60-20 Same 22 DCBMA37PS Same 20 DD115339-24 Same 11 DD121073-153 Same 4 DD121073-53 Same 4 DD19678-4 Same 10 DD19977-4 Same 10 DD20964 DD20964-32 9 DD21961 Same 18 DD21962 Same 19 DD24661 Same 9 DD50908-1 Same 22 DD51216 Same 12 DD51217 Same 12 DD51223-1 Same 15 DD53750-4 Same 22 DD-59-20 Same 22 DD-60-20 Same 22 DDBMA50PS Same 20 DE111919 Same 19 DE111920 Same 18 DE115339-20 Same 11 DE121073-154 Same 4 DE121073-54 Same 4 DE19977-5 DE19977-72 10 DE24657 DE24657-29 9 DE44994 DE44994-14 9 DE50904-1 Same 22 DE51218 Same 12 DE51219 Same 12 DE51224-1 Same 15 DE53750 Same 22 DE-59-20 Same 22 DE-60-20 Same 22 DEBMA9PS Same 20 DEBS-9 Same 11 StandardRoHS Page Part # Part # # StandardRoHS Page Part # Part # # StandardRoHS Page Part # Part # # D sub:Layout 1 3/24/09 12:37 PM Page 23

www.ittcannon.com Product Safety and Warranty 11.. MM AATTEE RRIIAALL CC OO NN TTEE NN TT AANN DD PPHHYYSSIICC AALL FFOO RRMM Electrical connectors do not usually contain hazardous materials. They contain conduct- ing and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, p lastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 22.. FFIIRREE CC HHAARRAACC TTEE RRIISSTTIICC SS AANNDD EE LLEE CC TTRRIICC SSHHOO CC KK HHAAZZAARRDD TThheerree iiss nnoo ffiirree hhaazzaarrdd ww hheenn tthhee ccoonnnneecc-- ttoorr iiss ccoorrrreeccttllyy ww iirreedd aanndd uusseedd ww iitthhiinn tthhee ssppeecciiffiieedd ppaarraamm eetteerrss.. IInnccoorrrreecctt ww iirriinngg oorr aasssseemm bbllyy ooff tthhee ccoonnnneeccttoorr oorr ccaarreelleessss uussee ooff mm eettaall ttoooollss oorr ccoonndduuccttiivvee fflluuiiddss,, oorr ttrraannssiitt ddaamm aaggee ttoo aannyy ooff tthhee ccoomm ppoonneenntt ppaarrttss mm aayy ccaauussee eelleeccttrriicc sshhoocckk oorr bbuurrnnss.. LLiivvee cciirrccuuiittss mm uusstt nnoott bbee bbrrookkeenn bbyy sseeppaa-- rraattiinngg mm aatteedd ccoonnnneeccttoorrss aass tthhiiss mm aayy ccaauussee aarrcciinngg,, iioonniizzaattiioonn aanndd bbuurrnniinngg.. Heat d issipation is greater at maximum resistance in a circuit. Hot spots may occur when resist- a nce is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the rat- ings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insu- lation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from t ouching overheated compo- nents. 33.. HHAANN DD LLIINN GG Care must be taken to avoid damage to any component parts of electrical connec- tors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain com- ponents to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in cre- ation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 44.. DD IISSPPOO SSAALL Incineration of certain materials may release noxious or even toxic fumes. 55 .. AAPPPPLLIICC AATTIIOO NN Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an elec- tric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before mak- ing live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IIMM PPOO RRTTAANN TT GG EE NN EE RRAALL IINN FFOO RRMM AATTIIOO NN ((ii)) AAiirr aanndd ccrreeeeppaaggee ppaatthhss//OO ppeerraattiinngg vvoolltt-- aaggee.. The a dmissible operating voltages depend on the individual applications and the valid national and other applicable safe- ty regulations. For this reason the air and creepage path data are only reference values. O bserve reduction of air and creepage paths due to PC board and/or harnessing. ((iiii)) TTeemm ppeerraattuurree All information given are temperature limits. The operation temperature depends on the individual application. ((iiiiii)) OO tthheerr iimm ppoorrttaanntt iinnffoorrmm aattiioonn Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. ITT Interconnect Solutions, a Division of ITT Corporation manufactures the highest qual- ity products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifica- tions is not recommended and may be unsafe. No information and data contained in this publication shall be construed to cre- ate any liability on the part of Cannon. Any new issue of this publication shall automati- cally invalidate and supersede any and all previous issues. PPrroodduucctt WW aarrrraannttyy A limited warranty applies to Cannon prod- ucts. In general, except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, dam- age, cost of repairs, incidental or consequen- tial damages of any kind, whether or not based on express or implied warranty, con- tract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples deliv- ered. Please refer to www.ittcannon.com (General Terms of Sale) for the complete text of Cannon’s applicable Terms and Conditions, including Warranty. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liabili- ty for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally per- mitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. “Engineered for life” is a registered trademark of ITT Corporation ©2006. All other trademarks or registered trademarks are property of their respective owners. All dates subject to change without notice. Commodities in this catalog may b e controlled for export by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR) when specifically designed modified, or configured for articles controlled by the United States Government. D sub:Layout 1 3/24/09 12:37 PM Page 24

D www.ittcannon.com/micro D-Subminiature Connectors Rack and Panel Connectors Microminiature Connectors Circular/Filter/Hermetic/Fiber Optic Connectors Initially pioneered by Cannon during the 1930s, Interconnect Solutions is the world leader in rack and panel connectors, offering unmatched variety of shell configurations and insertarrangements, materials, plating, and contact options. Many of our standard and custom designs meet the stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards. As a world leader in circular, filter, and hermetic connectors,ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configurations for various harsh environments. Our wide variety of fiber optic products include hybrid contacts, multi-channel, rack and panel, and hi-rel assemblies, including MIL and ARINC standard solutions.ITT can meet numerous specs, including NATO and MIL standards. Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. ITT D-Sub connectors are qualified to the MIL-DTL- 24308 specification. Developed first by Cannon in the 1960’s, Interconnect Solutions microminiature connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular, and strip configurations for countless applications, many of our connectors meet or exceed applicable requirements of the MIL- DTL-83513 specification. www.ittcannon.com/rackandpanel RF Connectors ITT Interconnect Solutions has been providing interconnect products to the Microwave and RF industry since 1963 (formerly The Sealectro Corporation). The RF 50 & 75 Ohm product lines cover UHF band through Ku band requirements. These connectors and cable assemblies are available with a thread type, snap type, bayonet type or slide on coupling method. The frequencies range from DC to 18+ GHz. www.ittcannon.com/RF50 • www.ittcannon.com/RF75 www.ittcannon.com/dsubs Transportation The ITT ICS interconnect range includes sealed circular and rectangular connectors in metal or plastic shells. These configurations include board to cable or cable to cable/ bulkhead applications. Both signal and power con- tacts can be combined in various layouts. All product lines within the Transportation segment offer very low contact resistance providing maxi- mum signal integrity. www.ittcannon.com/transportation ITT Interconnect Solutions is an international manufacturer and supplier of connectors including circular, rectangular, fiber optic, RF, power and high voltage, audio, PMCIA, Compact Flash Card, enclosures, cable assemblies, and application specific custom solutions. The Interconnect Solutions portfolio includes the brands Cannon, VEAM, and BIW. As a worldwide leader in connector technology for nearly a century, ITT offers one of the broadest product offerings, six sigma manufacturing capability, Value Based Product Development with exceptional engineering capability, and an extensive sales, distribution, and customer support network. D sub:Layout 1 3/24/09 12:37 PM Page 25

Customer Support Locations CHINA Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Baoan District, Shenzhen City, Guangdong, China 518125 phone: +86.755.2726.7238 fax: +86.755.2726.7515 GERMANY Cannonstrasse 1 Weinstadt, 71384 phone: +49.7151.699.0 fax: +49.7151.699.217 FRANCE 15, Boulevard Robert Thiboust Serris, France 77700 HONG KONG Units 2405-6, 24/F, ING Tower

308 Des Voeux Road

phone: +852.2732.2720 fax: +852.2732.2919 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 phone: +39.02938721 fax: +39.0293872300 JAPAN 11-3, 5 Chome,Hibarigaoka, Zama-shi Kanagawa, Japan 228-0003 phone: +81.462.57.2010 fax: +81.462.57.1680 UK Jays Close, Viables Estate Basingstoke, RG22 4BA phone: +44.1256.311200 fax: +44.1256.323356 USA

666 East Dyer Road

Santa Ana, CA 92705 toll free:1.800.854.3028 phone: +1.714.557.4700 fax: +1.714.628.2142 ©2008 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. www.ittcannon.com D sub:Layout 1 3/24/09 12:37 PM Page 26