CHD250

CHD250 XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

CH D250 Series AC -D C Pow er Supplies The universal AC input CHD250 provides 250W of convection cooled output power in a 3” x 5” industry standard package, over the temperature range -20°C to +50°C with derating to +70°C. Approved for IT and Medical and with a feature set including a 5V standby output, <0.5W input power when in standby mode, power fail and inhibit signals the CHD250 is ideal for a wide range of applications where fan cooling is not desirable.

• 250 W Convection-cooled
• Industry Standard 3 ”x 5”Package
• 80 VAC to 300 VAC Input
• 5V Standby (optional)
• <0.5W Standby Power
• IT & Medical (BF) Safety Approvals
• Power Fail & Inhibit Signals
• 3 Year Warranty

250 Watts

Dimensions: CHD250: 5.00 x 3.00 x 1.43” (115 x 76 x 36 mm) CHD250-C: w w w .xppow er.com 1 Models & Ratings Notes 2. A dd suffix -A for 5 V standby option or -AC for standby and cover options com bined, (derating w ill be applicable, see derating curve fig. 8). O utput Voltage 1 O utput C urrent V1 Standby Supply V2 (optional) O utput Pow er M odel N um ber (1,2 ) 12 V 20.8 A 5.0 V / 0.5 A 250 W CHD250PS12 15 V 16.7 A 5.0 V / 0.5 A 250 W CHD250PS15 24 V 10.4 A 5.0 V / 0.5 A 250 W CHD250PS24 28 V 8.9 A 5.0 V / 0.5 A 250 W CHD250PS28 48 V 5.2 A 5.0 V / 0.5 A 250 W CHD250PS48 Mechanical Details E A ø0.14 (3.5) thru in 4 positions 3.00 ±0.02 (76.2 ±0.51) 2.55 (64.7) Input Connector CON1 0.22 (5.71) 0.92 (23.4) 0.22 (5.71) 1.43 ±0.04 (36.3 ±1.0) 4.55 (115.5) P Pin 1Pin 2 Pin 10 Pin 9 P Detail A Signals Connector CON4

10 Way JST B10B-PHDSS

Scale 3:1 B C64 C53 Output Voltage Control +VE -VE Output Terminals M4 Screws in 2 positions. Torque to 8lbs-in (90 cNm) max.

w w w .xppow er.com 2 AC -D C Pow er Supplies Input Output C haracteristic M inim um Typical M axim um U nits N otes & C onditions Output Voltage 12 48 VDC See Models and Ratings table Initial Set Accuracy ±1 % 50% load, 115/230 VAC Output Voltage Adjustment +5/-4 % Minimum Load 0A Start Up Delay 1.3 2.0 s 115/230 VAC full load from input AC turn on Hold Up Time 15 ms 90 VAC, full load Drift ±0.2 % After 20 min warm up Line Regulation ±0.5 % 90-264 VAC at 50% load Load Regulation ±0.5 % On V1, from 0-100% load T ransient Response <4 % Recovery within 1% in less than 500 µs for a 50-75%-50% load change Ripple & Noise 1 % pk-pk 20 MHz bandwidth Overvoltage Protection 115 140 % Vnom DC. Output 1, recycle input to reset Overload Protection 110 150 % T rip & Restart characteristic V1 Short Circuit Protection Shutdown and auto recovery T emperature Coefficient 0.05 %/˚C Overtemperature Protection Not fitted Patient Leakage Current 83 100 µA 264 VAC/60 Hz C haracteristic M inim um Typical M axim um U nits N otes & C onditions Input Voltage - Operating 80 115/230 264 VAC Derate output power < 90 VAC. See fig. 1 Input Voltage - Fault Condition 300 VAC 5 seconds max Input Frequency 47 50/60 63 Hz Agency approval, 47-63 Hz Power Factor >0.93 EN61000-3-2 class A compliant EN61000-3-2 class C for loads ≥10% Input Current - Full Load 2.4/1.3 A 115/230 VAC No Load Input Power

0.5 W All models, when inhibit activated

3.2 W CHD250PS12 - 115V AC

3.1 W CHD250PS12 - 230V AC

3.8 W CHD250PS24 - 115V AC

3.1 W CHD250PS24 - 230V AC

3.5 W CHD250PS48 - 115V AC

2.8 W CHD250PS48 - 230V AC

Inrush Current 20 40 A 264 VAC cold start Earth Leakage Current 85/170 250 µA T yp. 115/230 VAC 50 Hz, Max 264 VAC 60 Hz Input Protection 5 A/250 V internal fuse in both AC lines Input Voltage Derating Figure 1 200 150 100 250 80 85 275 Input Voltage (VAC) Output Power (W) 300 90 264

w w w .xppow er.com AC -D C Pow er Supplies General C haracteristic M inim um Typical M axim um U nits N otes & C onditions Efficiency 93-94 % 230 VAC full load Isolation: Input to Output Input to Ground Output to Ground

4000 VAC 2 x MOPP

1500 VAC 1 X MOPP

5 6- 91 kHz Standby (optional) Power Density 11.7 W/in 3 Mean Time Between Failure 213 kHrs MIL-HDBK-217F , Notice 2 +25 °C GB Weight 0.94 (425) lb (g) CHD250PSxx 0.97 (441) CHD250PSxx-A 1.36 (619) CHD250PSxx-C 1.40 (636) CHD250PSxx-AC Efficiency Vs Load Figure 2

12 V Models

24 V Models

48 V Models

10.00% 20.00% 30.00% 40.00% 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% 20% 30% 40% 50% 60% 70% 80% 90% 100% load % Efficiency (%) PS12 115V PS12 230V 10.00% 20.00% 30.00% 40.00% 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% 20% 30% 40% 50% 60% 70% 80% 90% 100% load % Efficiency (%) PS24 115V PS24 230V 10.00% 20.00% 30.00% 40.00% 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% 20% 30% 40% 50% 60% 70% 80% 90% 100% load % Efficiency (%) PS48 115V PS48 230V

w w w .xppow er.com 4 AC -D C Pow er Supplies Signals & Controls C haracteristic N otes & C onditions Power Fail (AC-OK) Uncommitted isolated optocoupler transistor, normally off when AC is good (see fig.5) Provides 5 ms warning of loss of output from AC failure off when AC is healthy. Inhibit Uncommitted isolated optocoupler diode, powered diode inhibits the supply (see fig.6 & 7) Standby Supply (optional) 5V/0.5A Isolated supply present when AC applied. Remote Sense Compensates for 0.25V per lead, 0.5V total drop. Figure 5 Power Fail Figure 6 Inhibit (High) Figure 7 Inhibit (Low) Environmental C haracteristic M inim um Typical M axim um U nits N otes & C onditions Operating T emperature -20 +70 °C See derating curve, fig.8. and Thermal Considerations on page 8. Storage T emperature -40 +85 °C Cooling Convection cooled Humidity 95 %RH Non-condensing Operating Altitude 5000 m Inform ation Technology

4000 M edical

Shock ±3 x 30g shocks in each plane, total 18 shocks. 30g = 11ms (±0.5msec), half sine. Conforms to EN60068-2-27 & EN60068-2-47 Vibration Single axis 10 - 500 Hz at 2g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6 217 200 108.5 125 -20 50 Ambient Temperature (°C) Open Frame Convection Covered Convection Output Power (W) 250 300 220 165 126.5 110 82.5 -20 50 Ambient Temperature (°C) Open Frame Convection Covered Convection Output Power (W) Figure 8

5 V Standby (-A & -AC ) versions Standard & C overed (-C ) versions

Temperature Derating Curve Pin 2 CON 4 Power Fail Collector Power Fail Emitter Pin 1 CON 4 POWER SUPPLY Transistor On: Input & Output Not OK Transistor Off: Input & Output OK Signal Connector 8V Max 3 mA Inhibit Hi Pin 4 CON 4 POWER SUPPLY Signal Connector Inhibit Lo Pin 3 CON 4 5 mA 8 V Max 5 V VI RTN Pin 7 CON 4

8 V Max

P CON 4 5 V VI RTN Pin 7 CON 4

w w w .xppow er.com 5 AC -D C Pow er Supplies EMC: Emissions Phenom enon Standard Test Level N otes & C onditions Conducted EN55022/11 Class B Radiated EN55022/11 Class A Class B With 2 turn Wurth 742-700-56 core or similar on AC cable Harmonic Current EN61000-3-2 Class A All models Class C >225 W Safety Approvals EMC: Immunity Safety Agency Safety Standard N otes & C onditions C B R eport IEC 6095 0- 1 Ed 2 Inform ation Technology IEC 60601- 1 Ed 3 Including R isk M anagem ent M edical U L U L6095 0- 1 (2007), C SA 22.2 N o.6095 0- 1- 1:08 Inform ation Technology ANSI/AAMI ES60601-1:2005 & CSA C22.2, No.60601-1:08 M edical TU V EN60950-1 Inform ation Technology EN60601-1 M edical C E LVD & R oH S Equipm ent Protection C lass C lass I & B F See safety agency conditions of acceptibility for details M eans of Protection C ategory Primary to Secondary 2 x MOPP (Means of Patient Protection) IEC60601-1 Ed 3 Primary to Earth 1 x MOPP (Means of Patient Protection) Secondary to Earth 1 x MOPP (Means of Patient Protection) Phenom enon Standard Test Level C riteria N otes & C onditions Low Voltage PSU EMC EN61204-3 High severity level as below Radiated EN61000-4-3 3A EFT EN61000-4-4 3A Surges EN61000-4-5 Installation class 3 A Conducted EN61000-4-6 3A Dips and Interruptions EN55024 (100 VAC) Int >95% (0 VAC), 8.3ms A Dip 30% (70 VAC), 416ms B Int >95% (0 VAC), 4160ms B EN55024 (240 VAC) Int >95% (0 VAC), 10.0ms A Dip 30% (168 VAC), 500ms B Int >95% (0 VAC), 5000ms B EN60601-1-2 (100 VAC) Int >95% (0 VAC), 10.0ms A Dip 60% (40 VAC), 100ms A Derate output power to 120 W Dip 30% (70 VAC), 500ms A Int >95% (0 VAC), 5000ms B EN60601-1-2 (240 VAC) Int >95% (0 VAC), 10.0ms A Dip 60% (96 VAC), 100ms A Dip 30% (168 VAC), 500ms A Int >95% (0 VAC), 5000ms B

w w w .xppow er.com AC -D C Pow er Supplies Mechanical Details 1. Dimensions shown in inches (mm). Notes CHD250 CHD250 Standby Option (-A) Standby O utput (O ption -A) 1 +5 V 2 +5 V 3 0 V 4 0 V O utput C onnector C O N 3 1 +VE 2 -VE In put C onnector C O N 1

1 Line

2 Neutral

series 5194 crimp terminals. Signals C onnector C O N 4

1 Power Fail (Emitter)

2 Power Fail (Collector)

3 Inhibit (Cathode)

4 Inhibit (Anode)

5 N/C

6 N/C

SPHD-001T -P0.5 crimp terminals Mates with JST PHDR-4 housing and JST SPH-002T -P0.5L crimp terminals E A A A ø0.14 (3.5) thru in 4 positions ø0.14 (3.5) thru in 4 positions 3.00 ±0.02 (76.2 ±0.51) 3.00 ±0.02 (76.2 ±0.51) 2.55 (64.7) 0.22 (5.71) 0.92 (23.4) 2.55 (64.7) Input Connector CON1 0.22 (5.71) 0.92 (23.4) 0.22 (5.71) 0.22 (5.71) 1.43 ±0.04 (36.3 ±1.0) 1.43 ±0.04 (36.3 ±1.0) 4.55 (115.5) 4.55 (115.5) Pin 4 Pin 1Pin 2 Pin 10 Pin 9 Pin 3 Pin 2 Pin 1 Detail B Standby Board O/P Connector Cons JST S48-PH-K-S Detail A Signals Connector CON4 Scale 3:1 B 1.49 37.8) 0.80 (20.2) 0.30 (7.5) Output Voltage Control +VE -VE Output Terminals M4 Screws in 2 positions. Torque to 8lbs-in (90 cNm) max. C53 under standby board Standby Board (Option -A) C64 C64 C53 Output Voltage Control +VE -VE Output Terminals M4 Screws in 2 positions. Torque to 8lbs-in (90 cNm) max.

w w w .xppow er.com AC -D C Pow er Supplies Mechanical Details 1. Dimensions shown in inches (mm). Notes CHD250 Covered (-C) CHD250 Covered Standby Option (-AC) Standby O utput (O ption -A) 1 +5 V 2 +5 V 3 0 V 4 0 V O utput C onnector C O N 3 1 +VE 2 -VE In put C onnector C O N 1 series 5194 crimp terminals. Signals C onnector C O N 4 SPHD-001T -P0.5 crimp terminals Mates with JST PHDR-4 housing and JST SPH-002T -P0.5L crimp terminals M3 Mounting Holes in 2 positions 4.72 (120.0) 0.39 (9.85) 0.93 (23.7) Pin 2 Pin 1 Pin 10 Pin 9 Detail A Signals Connector CON4 10 way JST B10B-PHDSS 3.48 ±0.02 (88.5 ±0.5) A -VE +VE 1.75 (44.4) 1.73 (43.9) 1.03 (26.1) 0.59 (15.0) Con 4 Con 3 Con 2 Output Terminals M4 Screws in 2 positions torque to 8 lbs (90 cNm) max. 4.72 (120.0) 0.39 (9.85) 1.97 (50.0) 0.7 (19.3) M3 mounting holes in 4 positions maximum penetration by screw to be 3.0 mm from bottom face of cover Output Voltage Control Con 1 M3 Mounting Holes in 2 positions 4.72 (120.0) 0.39 (9.85) 0.93 (23.7) Pin 2 Pin 1 Pin 10 Pin 9 Detail A Signals Connector CON4 10 way JST B10B-PHDSS 3.48 ±0.02 (88.5 ±0.5) A -VE +VE 1.75 (44.4) 1.73 (43.9) 1.03 (26.1) 0.59 (15.0) Con 4 Con 3 Con 2 Output Terminals M4 Screws in 2 positions torque to 8 lbs (90 cNm) max. 4.72 (120.0) 0.39 (9.85) 1.97 (50.0) 0.7 (19.3) M3 mounting holes in 4 positions maximum penetration by screw to be 3.0 mm from bottom face of cover Output Voltage Control Con 1 B

w w w .xppow er.com 22 Dec 15 AC -D C Pow er Supplies Estimated Service Life vs Component Temperature In order to ensure safe operation of the PSU in the end-use equipment, the temperature of the components listed in the table below must not be exceeded. T emperature should be monitored using thermocouples placed on the hottest part of the component (out of direct air flow). See below for component locations. The estimated service life of the CHD250 Series is determined by the cooling arrangements and load conditions experienced in the end application. Due to the uncertain nature of the end application this estimated service life is based on the actual measured temperature of a key capacitors with in the product when installed by the end application. The worst case of the two figures should be taken as the indicative service life in 24/7 operation. The graph below expresses the estimated lifetime of a given component temperature and assumes continuous operation at this temperature. Tem perature M easurem ents (At Am bient 50 °C ) C om ponent M ax Tem perature °C T1 C oil 120 ° C L3 C oil 120 ° C C 64 105 ° C C 5 3 105 ° C Thermal Considerations Service Life C64 C53 50000 100000 150000 200000 250000 300000 350000 105 95 85 C53 T emperature (°C) Lifetime (Hrs) 75 65 55 C64 T emperature (°C) Lifetime (Hrs) 20000 40000 60000 80000 100000 120000 140000 160000 180000 105 95 85 75 65 55