CFT-90-W_V01 LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 16

Technical content

Features

  • Second generation monolithic 9 mm 2 specialty white LED delivers in - creased peak lumens and drive current over CBT-90-W
  • High current operation: up to 27 A DC
  • Over 6,500 lumens at maximum drive current
  • Available in 5700K, 6500K and 7800K (typical) color temperatures
  • Window-lesspackagedesignimprovesopticalcouplingefficiency
  • Low thermal resistance chip-on-board packaging technology: 0.45°C/W typical junction to back of board
  • Common cathode chip technology delivers increased performance and simplifiessystemdesign
  • Hotlumensspecification,productiontestedat22.5ADC,90°Cjunction temperature Table of Contents Angular Distribution and Typical

Chromaticity Bins Binkit Ordering Part Number Min. Flux Bin Min. Flux WDS UA 3,680 lm H, J, HJH, HJL, K, KH UA500 CFT-90-WDS-X11-UA500 H, J, HJH, HJL UA501 CFT-90-WDS-X11-UA501 H, J UA502 CFT-90-WDS-X11-UA502 UB 3,955 lm H, J, HJH, HJL, K, KH UB500 CFT-90-WDS-X11-UB500 H, J, HJH, HJL UB501 CFT-90-WDS-X11-UB501 H, J UB502 CFT-90-WDS-X11-UB502 VA 4,230 lm H, J, HJH, HJL, K, KH VA500 CFT-90-WDS-X11-VA500 H, J, HJH, HJL VA501 CFT-90-WDS-X11-VA501 VB 4,545 lm H, J, HJH, HJL, K, KH VB500 CFT-90-WDS-X11-VB500 H, J, HJH, HJL VB501 CFT-90-WDS-X11-VB501 WA 4,860 lm H, J, HJH, HJL, K, KH WA500 CFT-90-WDS-X11-WA500 WCS UA 3,680 lm D, E, F, G, DEH, DEL, FGH, FGL UA600 CFT-90-WCS-X11-UA600 F, G, FGH, FGL UA601 CFT-90-WCS-X11-UA601 UB 3,955 lm D, E, F, G, DEH, DEL, FGH, FGL UB600 CFT-90-WCS-X11-UB600 F, G, FGH, FGL UB601 CFT-90-WCS-X11-UB601 VA 4,230 lm D, E, F, G, DEH, DEL, FGH, FGL VA600 CFT-90-WCS-X11-VA600 F, G, FGH, FGL VA601 CFT-90-WCS-X11-VA601 VB 4,545 lm D, E, F, G, DEH, DEL, FGH, FGL VB600 CFT-90-WCS-X11-VB600 F, G, FGH, FGL VB601 CFT-90-WCS-X11-VB601 WA 4,860 lm D, E, F, G, DEH, DEL, FGH, FGL WA600 CFT-90-WCS-X11-WA600 WSS UA 3,680 lm C, D, E, DEH, DEL UA700 CFT-90-WSS-X11-UA700 D, E, DEH, DEL UA701 CFT-90-WSS-X11-UA701 B, C, D UA900 CFT-90-WSS-X11-UA900 UB 3,955 lm C, D, E, DEH, DEL UB700 CFT-90-WSS-X11-UB700 D, E, DEH, DEL UB701 CFT-90-WSS-X11-UB701 B, C, D UB900 CFT-90-WSS-X11-UB900 VA 4,230 lm C, D, E, DEH, DEL VA700 CFT-90-WSS-X11-VA700 D, E, DEH, DEL VA701 CFT-90-WSS-X11-VA701 VB 4,545 lm C, D, E, DEH, DEL VB700 CFT-90-WSS-X11-VB700 Ordering Part Numbers1

Ordering Information

2PDS-002888 Rev 04 www.luminus.com Note: 1. Flux Bin listed is minimum bin shipped, higher bins may be included at Luminus’ discretion.

Product Family Chip Area Color Package Configuration Bin Kit C : Chip on board F : Flat-top window-less package T : single monolithic emitter 90: 9.0 mm2 W: White t: Color temperature D: Daylight C: Cool White S: Stage White c: CRI S: Standard Internal package code Refer to ordering part numbers in this document CFT 90 W<tc> X11 <Bin kit> 3PDS-002888 Rev 04 www.luminus.com

Binning @ 22.5 A, Ths= 40°C4,5 Minimum Flux (lm) Maximum Flux (lm) White UA 3,680 3,955 UB 3,955 4,230 VA 4,230 4,545 VB 4,545 4,860 WA 4,860 5,225 WB 5,225 5,590 XA 5,590 6,011 XB 6,011 6,430 YA 6,430 6,910 Flux Bins1,2 Note: 1.Luminusmaintainsa+/-6%toleranceonfluxmeasurements. 2. Products are production tested then sorted and packed by bin. 3. Individual bins are not orderable. Please refer to the Product Ordering information page for a list of orderable bin kits. 4. Product test condition: 22.5 A DC, 40°C heat sink temperature. 5. Ths= heat sink temperature. CFT -90-W Product Datasheet 4PDS-002888 Rev 04 www.luminus.com

5PDS-002888 Rev 04 www.luminus.com Note: 1. Product test condition: 22..5 A DC, 20 ms single pulse, 40°C heat sink temperature. Chromaticity Bins

6PDS-002888 Rev 04 www.luminus.com Note: 1. Product test condition: 22..5 A DC, 20 ms single pulse, 40°C heat sink temperature. Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy A 0.263 0.285 DEH 0.285 0.317 G 0.311 0.339 K 0.338 0.361 B 0.272 0.296 E 0.293 0.320 H 0.321 0.346 KH 0.338 0.368 C 0.282 0.308 F 0.303 0.331 HJL 0.322 0.324 D 0.286 0.313 FGH 0.302 0.336 HJH 0.320 0.352 DEL 0.294 0.292 FGL 0.307 0.311 J 0.329 0.353 Chromaticity Binning Coordinates1

Parameter Symbol Values Unit Forward Current (CW)1 If min 0.2 A If max 27 Forward Surge Current (Pulsed)2 (Frequency >240Hz, duty cycle <10%, t<=1ms) Isurge max 36 A Storage Temperature Ts min -40 Ts max 100 Junction Temperature2 Tj max 150 °C Operating Temperature Topr min -40 Topr max 85 CFT -90-W Product Datasheet Note: 1. For reference only. 2.CFT -90-WLEDisdesignedforoperationtoanabsolutemaximumcurrentandtemperatureasspecifiedabove.Productlifetimedataisspecifiedatrecommended forward drive currents. Sustained operation at or beyond absolute maximum currents or temperatures will result in a reduction of device lifetime compared to recommended conditions. 7PDS-002888 Rev 04 www.luminus.com

Optical and Electrical Characteristics Symbol Value Unit WSS WCS WDS Emitting Area AE 9.0 mm2 Emitting Area Dimension 3.0x3.0 mm x mm Typical Peak Luminous Flux1,2 ΦV 5,300 5,400 5,500 lm Typical Peak Radiometric Flux1,2 ΦE 17.4 17.2 17.0 W ViewingAngle(50%ofpeakflux) 2 Ø1/2 120 degrees Forward Voltage1 Vf min 2.9 VVf 3.4 Vf max 4.2 Typical Color Rendering Index CRI 65 65 65 Thermal Characteristics Thermal Resistance (junction to coreboard)3 Rth j-b 0.35-0.55 °C/W Thermal Resistance (junction to thermistor)3 Rth j-ref 0.38-0.58 °C/W ThermalCoefficientofRadiometricFlux(typical) -0.3 %/°C CFT -90-W Product Datasheet Note: 1. Unless otherwise noted, values listed are typical. All ratings are based on operation with a constant temperature = 90°C. 2.Totalfluxfromemittingareaatlisteddominantwavelength.Reportedperformanceisincludedtoshowtrendsforaselectedpowerlevel.Forspecificminimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus. 3. Measurements are in accordance with JEDEC 51-14. For more about thermal resistance calculation, please see https://luminusdevices.zendesk.com/hc/en-us/ articles/4416807960717-Thermal-Heatsink-Required-Rth-Calculator 8PDS-002888 Rev 04 www.luminus.com

Forwardcurrent:φv/φv(22.5 A) DC, Ths = 40°C Temperature:φv/φv(90°C) DC, If = 22.5 A Forward Voltage Forward current: Vf = V(If) DC, Ths = 40°C 2.60 2.70 2.80 2.90 3.00 3.10 3.20 3.30 3.40 3.50 3.60 0 5 10 15 20 25 Forward Voltage (Vf) If (A) Temperature:ΔVf = V(Tj) - V(90°C) DC, If = 22.5 A Relative Chromaticity Shift Forwardcurrent:ΔCIEx,y=CIEx,y(If) - CIEx,y(22.5 A) DC, Ths = 40°C Temperature:ΔCIEx,y=CIEx,y(Tj) - CIEx,y(90°C) DC, If = 22.5 A 9PDS-002888 Rev 04 www.luminus.com

Angular Intensity Distribution Angular Distribution and Typical Spectrum Typical Spectrum 0.0 0.2 0.4 0.6 0.8 1.0 400 450 500 550 600 650 700 Relative Intensity Wavelength (nm) Iref=f(Φ); Tc = 25°C Φref = f(λ);If = 22.5 A; Tc = 25°C 10PDS-002888 Rev 04 www.luminus.com 0.2 0.4 0.6 0.8 1.0 0°10° 20° 30° 40° 50° 60° 70° 80° 90°

Angular Distribution and Typical Spectrum Iref=f(Φ); Tc = 25°C 11PDS-002888 Rev 04 www.luminus.com

Recommended Connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNG14-250FL-C Male Thermistor Connector on board: TYU P/N TU1212WBR-02S-C1-NL-A and MOLEX P/N 53780-0270 Check NEC standards for ampacity of the power cable being used. Please note that the CFT-90-W copper PCB is electrically active with a common Cathode (-) polarity. Recommended Female Thermistor Connector (Mating connector): MOLEX P/N 51146-0200 (not recommended for new designs), TYU P/N TU1212HNO-02 or equivalent For detailed drawing please refer to DWG-002705 document 10.2 2X 6.35 3.0 EMITTING AREA 3.0 EMITTING AREA 2X 4.0±.1 6.10 .10 5.50 11.00 2X 3.0+ 18.00 28.00±.30 9.00 E E 3.43±.34 26.75±.30 5.7 D SECTION E-E "A" "B" "C" DETAIL D 2X 1.65+ .25 .00 BOTTOM OF CBORE TO BACK OF COREBOARD DWG-002705 REV04 DIMENSIONS IN MILLIMETERS DIMENSION NAME DESCRIPTION NOMINAL DIMENSION TOLERANCE "A" TOP OF METAL SUBSTRATE TO TOP OF FRAME .61 .08 "B" TOP OF EMITTING AREA TO TOP OF FRAME .21 .12 "C" TOP OF METAL SUBSTRATE TO TOP OF EMITTING AREA .40 .075 12PDS-002888 Rev 04 www.luminus.com

13PDS-002888 Rev 04 www.luminus.com

Label Fields:

  • CPN: Luminus ordering part number
  • CID: Customer’s part number
  • QTY: Quantity of devices in pack
  • Flux:Binasdefinedonpage 4
  • Voltage: NA
  • Color:Binasdefinedonpage 6
  • CRI: NA Packing Configuration:
  • Maximum stack of 5 trays per pack with 10 devices per tray
  • Partial pack or tray may be shipped
  • Each pack is enclosed in anti-static bag
  • Shipping label is placed on top of each pack XXX-XX-XXXX-XXXX-XXXXXXXXX Box ID 14PDS-002888 Rev 04 www.luminus.com

This product is sensitive to static electricity, and care should be taken when handling them. Static electricity or surge voltage will damage the LEDs. It is recommended to wear an anti-electrostatic wristband or anti-electrostatic gloves when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken to isolate LED processing equipment from potential sources of voltage surges. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It 15PDS-002888 Rev 04 www.luminus.com

Revision History

Rev Date Description of Change 01 01/18/2017 Initial release 02 06/14/2017 Removepreliminary.AddBchromaticitybinandeliminatedTBfluxbin.Updatedorderingbinkits. 03 07/07/2017 Add comment on mechanical drawing page. 04 06/05/2024 Update template, drawing, product image, characteristics and thermistor connector information CFT -90-W Product Datasheet 16PDS-002888 Rev 04 www.luminus.com