CFT-90-CG LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Features:

  • Large, monolithic chip with uniform emitting area of 9 mm2
  • Phosphor Converted Green LED device with typical center wavelength emission of 579 nm
  • Windowless package improves coupling-efficiency into fiber optics
  • Common Anode package design with low thermal resistance of 0.45C/W typical (junc- tion to case)
  • Ultra High thermal conductivity package allows operation at up to 22.5A CW.
  • High precision LEDs placement on copper core PCB for easier thermal management and optical integration
  • Environmentally friendly: RoHS and Halogen compliant Applications:
  • Fluorescence Microscopy and imaging
  • Medical Endoscopy Table of Contents Optical and Electrical Mechanical Dimensions .... 9 Packaging Information 10-11 PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 CFT-90 Converted Green High Brightness Green LED CFT-90-CG Product Datasheet

Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40ºC heat sink and allowing the device to reach thermal equilibrium while fully powered. Only after the device reaches equilibrium are the measurements taken. This method of measurement ensures that Luminus LEDs perform in the field just as they are specified. Expected flux values in real world operation can be extrapolated based on the information contained within this product data sheet. Understanding Luminus LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’ products. PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 CFT-90-CG Product Datasheet Luminus LED Technology Luminus’ Devices vertical chip LED technology enables large area LED chips with uniform brightness over the entire LED chip surface. The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot. Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to heat sink of 0.7º C/W, Luminus CFT-90 LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. Reliability Designed from the ground up, Luminus LEDs are one of the most reliable light sources in the world today. Luminus LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus LEDs are ready for even the most demanding applications. Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury. Technology Overview Luminus LEDs™ benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency.

CFT-90-CG Binning Structure All CFT-90 Converted Green LEDs are tested for radiometric power / center wavelength and placed into the following flux/ wavelength bins. The binning structure is universally applied across each monochromatic color of the CFT-90 product line. PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Bin name Min Radiometric Power (W) @ 22.5A CW Max Radiometric Power (W) @ 22.5A CW CG1 9.08 9.78 CG2 9.78 11.38 CG3 11.38 13.69 Note: Luminus maintains a +/-6% tolerance in flux measurements. Radiometric Power Bins* Bin name Min Center Wavelength @ 22.5A CW Max Center Wavelength @ 22.5 CW CG1, CG2 and CG3 573 585 Center Wavelength Bins CFT-90-CG Product Datasheet

Ordering Information

PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Ordering Part Number 1,2,3 Minimum Bin Description CFT-90-CG-L11-G100 CG1 min Converted Green LED™ CFT-90 consisting of 9 mm2 LED, thermistor, and connector mounted on a custom copper-core PCB - Full Center WL distribution CFT-90-CG Product Datasheet Note 1: A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. Individual flux bins are not orderable. Note 2: Flux Bin listed is minimum bin shipped - higher bins may be included at Luminus’ discretion Part Number Nomenclature Product Family Chip Area Color Package Configuration Bin Kit 1,2 CFT: Copper-core PCB, No Encap- sulation 90: 9 mm2 CG= Converted Green L11: 28 mm x 26.75 mm - Common Anode Package See Mechanical Drawing section See flux and power bins on page 3

PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 1 Optical & Electrical Characteristics General Characteristics Symbol Converted Green Unit Emitting Area 9.0 mm2 Emitting Area Dimensions 3.0x3.0 mm x mm Characteristics at Recommended Test Drive Current , If 1, 2 Reference Duty Cycle 100 % Test Peak Drive Current typ IF 22.5 A Radiometric Power 3,4,5 min Φr min 9.08 W typ Φr 10.8 W max Φr max 13.69 W Filtered Radiometric Power in [500 to 600nm] range (for reference only). min Φfr min 5.9 W typ Φfr 7.0 W max Φfr max 8.9 W Center Wavelength 3 min λcmin 573 nm typ λc 579 nm max λc max 585 nm FWHM- Spectral bandwidth at 50% of Φv 3 min 91 nm typ FWHM 103 nm max 115 nm Forward Voltage3 min VF min 3.2 V typ VF 3.8 V max VF max 4.4 V Device Thermal Characteristics Thermal Coefficient of Photometric Flux typ -0.3 % / oC Thermal Coefficient of Radiometric Flux typ -0.3 % / oC Forward Voltage Temperature Coefficient typ -2 mV/ oC Angular Distribution Pattern Viewing angle at 50 % IV 9 2j 120 degrees CFT-90-CG Product Datasheet Typical Device Performance

PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 CFT-90-CG Product Datasheet Optical & Electrical Characteristics Absolute Maximum Ratings Symbol Converted Green Unit Absolute Minimum Current (CW or Pulsed)6,7 0.2 A Absolute Maximum Current (CW)8 22.5 A Absolute Maximum Surge Current 8 (Frequency > 240 Hz, duty cycle =10%, t=1ms) 36 A Absolute Maximum Junction Temperature 8 Tjmax 170 ºC Storage Temperature Range -40/+100 ºC Note 1: All ratings are based on operation with a constant heat sink temperature Ths =40ºC. See Thermal Resistance section for Ths definition. Note 2: CFT-90 Converted Green devices can be driven at currents ranging from 200mA to 36A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. Note 3: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 22.5 A. Note 4: Typical junction temperature at test (Ths=40ºC, 22.5A CW) is around 120ºC. Note 5: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye. Note 6: For reference only. Note 7: Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information. Note 8: CFT-90 Converted Green LEDs are designed for operation to an absolute maximum current and temperature as specified above. Product lifetime data is specified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents or temperatures will result in a reduction of device lifetime compared to recommended conditions. Refer to the lifetime derating curves for further information. Note 9: Angular Distribution parameter is guaranteed by design and is not measured in Production. Note 10: Filtered Radiometric Power from emitting area in the 500 to 600nm wavelength range. For reference only.

Relative Output Flux vs. Forward Current Forward Current vs. Forward Voltage PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Optical & Electrical Characteristics CFT-90-CG Product Datasheet Angular Intensity Distribution (Typical)

Relative Lumens vs. Temperature Relative Radiometric Power vs. Temperature PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 CFT-90-CG Product Datasheet Light Output Characteristics Over Junction Temperature Relative Forward Voltage vs. Temperature Relative Center Wavelength vs. Temperature

PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Thermal Resistance Typical Thermal Resistance Rθj-b1 0.45 ºC/W Rθb-hs1 0.2 ºC/W Rθj-hs2 0.7 ºC/W Rθj-ref1 0.5ºC/W Note 1: Thermal resistance values are based on FEA model results correlated to measured Rθj-hs data. Note 2: Thermal resistance is measured using eGraf 1205 thermal interface material. Thermistor Information The thermistor used in CFT-90 LEDs mounted on core-boards is from Murata Manufacturing Co. The global part number is NCP18XH103J03RB. Please see http://www.murata.com/ for details on calculating thermistor temperature. Electrical Pinout 100 125 0 5 10 15 20 Temperature ( ° C) Resistance (K ohm) CFT-90-CG Product Datasheet

PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Mechanical Dimensions – CFT-90-CG Common Anode LED Recommended connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNG14-250FL-C Thermistor Connector: MOLEX P/N 53780-0270 or GCT P/N WTB08-021S-F Recommended Female: MOLEX P/N 51146-0200, GCT P/N WTB06-021S-F or equivalent Future versions of the CFT-90-CG are expected to implement a common cathode design (reverse substrate polarity). Luminus encourages customers to implement a polarity agnostic design or to make provisions that will ease future transition to a common cathode version of the product. CFT-90-CG Product Datasheet 2X 6.35 10.2 3.0 EMITTING AREA 3.0 EMITTING AREA 28.00±.30 18.00 11.00 5.50 2X 3.0+ 2X 2.9±.1 E E DIMENSIONS IN MILLIMETERS 3.43±.10 26.75±.30 5.7 C SECTION E-E "A" "B" "C" DETAIL C DWG-002650 DIMENSION NAME DESCRIPTION NOMINAL DIMENSION TOLERANCE "A" TOP OF METAL SUBSTRATE TO TOP OF FRAME .61 .08 "B" TOP OF EMITTING AREA TO TOP OF FRAME .14 .10 "C" TOP OF METAL SUBSTRATE TO TOP OF EMITTING AREA .46 .02

41.40 PITCH SECTION A-A TYP0.76 TYP 19.81 TOP TRAY SHOWN TRANSPARENT FOR REFERENCE ONLY 6.35 127 254 266.70 139.70 51.05 203.71 57.15 AA DIMENSIONS IN MILLIMETERS PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 For detailed drawing of shipping trays, please refer to document TO-0479, available upon request. Shipping Tray Outline CFT-90-CG Product Datasheet

PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Shipping Box Shipping Box Quantity Material Dimensions (L x W x H, mm) Carton Box 1 -20 packs (50 - 1000 Devices) S4651 560 x 560 x 200 Packing and Shipping Specification (CFT-90) Sample label –for illustration only Label Fields (subject to change):

  • 6-8 digit Box number (for Luminus internal use)
  • Luminus ordering part number
  • Quantity of devices in pack
  • Part number revision (for Luminus internal use)
  • Customer’s part number (optional)
  • Bin (FF-WW) as defined page 3
  • 2D Bar code Product Label Specification Packing Configuration Qty /Pack Reel Dimensions (diameter x W, mm) Gross Weight (kg) Stack of 5 trays with 10 devices per tray Each pack is enclosed in ESD bag 50 150 x 280 x 85 2.7 Packing Specification CFT-90-CG Product Datasheet

Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries. PDS-002968 Rev 03 © 2018 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 History of Changes Rev Description of Change 01 02/20/2018 Initial Release - Preliminary Specifications 02 06/07/2018 Removed note 3 on page 4 03 06/20/2018 Revised Relative Output Flux vs. Forward Current graph on page 7 CFT-90-CG Product Datasheet