CDP-TW3000-BSY

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

24 V DC

» Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101‑2; and for daily ventilation » With integrated BSY+ motor and synchronised electronics controlled via microprocessor » High‑speed function (HS) for especially fast opening windows in case of fire (SHEV) » Option of up to 2 drives in one synchronous group » Symmetrical chain outlet for easy installation » Relief of pressure on window gasket after closing process » Programmable drive functions and different drive parameters » Running speed in CLOSED direction decreases to 5 mm/s (passive closing edge protection) » Time‑controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection) Potential drive options CDP Series High-performance chain drives (twin) You can find the explanations for the icons on the last page We reserve the right to make changes. ©2018 D+H Mechatronic AG, Ammersbek

D+H EURO RWA D+H EURO SHEV 110 401 870 401 1672 Brackets are not included and have to be ordered separately. Supply 24 V DC / ±15 % / 8 A Duty cycle 30 % Force of pressure 3000 N Tensile force 2000 N Nominal locking force 3000 N Service life > 10000 double strokes OPEN running speed 6 mm/s OPEN running speed ‑ SHEV 17.7 mm/s CLOSED running speed 6 mm/s Type of protection IP 32 Emission sound pressure level LpA ≤ 70 dB(A) Temperature range ‑5 °C ... +75 °C Fire resistance B300 (30 min / 300 °C) Housing Aluminium Surface Powder‑coated Colour White aluminium Connection 2.5 m silicone cable W x H x D 1672 x 67 x 110 mm Type Art. No. Stroke Weight Remark CDP‑TW 3000/800‑BSY+ 26.601.50 800 mm 16.60 kg CDP‑TW 3000/1000‑BSY+ 26.601.55 1000 mm 17.70 kg CDP‑TW‑BSY+ 26.601.00 Variable equipment possible 5014068.18001 1000 1500 500 200 400 600 800 1200 3000 1600 2000 1000 1400 2500 Permanent Stroke/uni00A0//uni00A0mm Max. pressure load/uni00A0//uni00A0N Article also available with the following permissions under other article numbers. Technical data may deviate. C US Dimensions All specifications in mm Design Pressure load diagram Technical data Approvals / Certificates Find out about permission details from your D+H Partner Status 02/2018

C BSY+ 0 100 ACB (Advanced Communication Bus) Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Com‑ munication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB‑capable control panel or enables it to be directly connected to higher‑level controllers such as a building management system. Audible signal (corresponding to protection class) AS2 corresponding to “Protection class 2” in accordance with ZVEI risk assessment through an audible warning signal in the “CLOSED” running direc‑ tion. AS3 corresponding to “Protection class 3” in accordance with ZVEI risk assessment, in addition to AS2, stops the drive for 11 s with a remaining stroke of 28 mm. End position message (OPEN / CLOSED) Drive feedback via an integrated isolated switching contact. This happens if the chain / rack and pinion has moved completely out or in. BRV signal Acknowledgement from the drive, via a control cable, to confirm that it has been completely extended or retracted. When used with the AT 41 and ERM 44 modules, this signal is sent to the central building control system, the modules themselves, or to the lock drive. The BRV signal is not isolated. BSY+ (synchronisation of drives) In addition to providing the same synchronisation function as BSY, BSY+ enables different components in the window to communicate with each other. For example, the chain drives, during synchronous operation, or the window and lock drives (e.g. FRA 11 BSY+ or VLD‑BSY+). HS “High‑Speed” In the case of SHEV, the high‑speed function is used for reliably reaching the defined end position in 60 s. In daily ventilation mode, the drive runs quietly and quickly, as usual. Mechanical adjustment Drive option for adjusting the overall length or design (e.g.: centred chain outlet). Function programming Option for customised configuring of drive parameters (e.g. stroke) via software and associated service tools for drives equipped with PLP , BSY or BSY+ electronics. SBD side bow chain Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable). SBU side bow chain Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable). SGI signal (position reporting) In combination with the D+H servo plug‑in unit SE 622, the drives can be controlled with perfect positioning. SKS (closing edge protection) Drive option, which enables an anti‑trap strip or presence detector to be connected directly to the drive (terminal resistor 5.6 kΩ).