CDM-6-3018-90-18-DW0X LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

PDS-002953 www.luminus.com 1 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 Warm Dimming LED Spot Modules Features:  High lumen density for directional lighting  Dim-to-warm with IC chip and LM-80 tested MP-1616 XNOVA Cube™ LEDs on metal PC board  Enables system beam angles from 10 to 40 degrees  Simplifies lamp and luminaire design  Compatible with most single channel drivers and dimmer switches  Up to 97CRI (typical) at 3000K dimming down to 1800K for residential and hospitality lighting  92CRI (typical) 4000K to 2700K warm dimming for commercial lighting  Two dimming curve options: “halogen-like” -DW01 and “linear-style” -DW02  Consistent white light <3 SDCM  Specified “hot” performance and 100% factory tested at Tj=85°C Applications:  Hospitality / hotel / restaurant lighting  Residential lighting  Retail shop lighting  Public, commercial buildings  Ceiling and wall mount lights Products Families:  CDM-6-XXXX-YY-18-DW0x: Typical 5.5W  CDM-9-XXXX-YY-36-DW0x: Typical 11W  CDM-14-XXXX-YY-36-DW0x: Typical 21.5W  CDM-18-XXXX-YY-36-DW0x: Typical 32.5W o XXXX: CCT range (“3018” = 3000K to 1800K) o YY: CRI (“90” = either 92 or 95 min, refer to page 3) o “18” or “36” = nominal voltage o DW01 = standard configuration with “halogen-like” dimming curve o DW02= standard configuration with “linear-style” dimming curve

PDS-002953 www.luminus.com 2 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 Technical Data Electrical data and maximum ratings (@Tj =85°C): Part Number Nominal Input Power Maximum Input Power Nominal Current Absolute Maximum Current Typical Voltage@ Nominal Current Maximum Voltage @ Nominal Current CDM-6-3018-90-18-DW0x 5.5W 8.5W 300mA 440mA 17.8V 19V CDM-6-4027-90-18-DW0x 5.5W 8.5W 300mA 440mA 17.8V 19V CDM-9-3018-90-36-DW0x 11W 14.5W 300mA 440mA 35.5V 38V CDM-9-4027-90-36-DW0x 11W 14.5W 300mA 440mA 35.5V 38V CDM-14-3018-90-36-DW0x 21.5W 32.5W 600mA 800mA 35.5V 38V CDM-14-4027-90-36-DW0x 21.5W 32.5W 600mA 800mA 35.5V 38V CDM-18-3018-90-36-DW0x 32.5W 40W 900mA 1080mA 35.5V 38V CDM-18-4027-90-36-DW0x 32.5W 40W 900mA 1080mA 35.5V 38V Absolute maximum ratings & optical/electrical characteristics: Parameter Symbol Minimum Typical Maximum Unit Operating case temperature Tc 105 °C Junction temperature Tj 125 °C Viewing angle 2(Θ1/2) 130 degrees Reverse voltage Vr 5 volts Ambient operating temperature Topr -40 +85 °C Storage temperature Tsto -40 +85 °C Electrostatic Discharge ESD 4000V HBM

PDS-002953 www.luminus.com 3 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 Photometric data (@nominal forward current & Tj =85°C): Halogen-like (-DW01) Series Part number Nominal Current Minimum Flux (lumens) Typical Luminous Efficacy Typical Flux (lumens) Minimum CRI (Ra) CDM-6-3018-90-18-DW01 300mA 465 95 lm/W 510 90 CDM-6-4027-90-18-DW01 300mA 500 103 lm/W 550 90 CDM-9-3018-90-36-DW01 300mA 900 95 lm/W 1000 95 CDM-9-4027-90-36-DW01 300mA 1000 103 lm/W 1120 90 CDM-14-3018-90-36-DW01 600mA 1760 95 lm/W 1975 95 CDM-14-4027-90-36-DW01 600mA 2000 103 lm/W 2240 90 CDM-18-3018-90-36-DW01 900mA 2730 95 lm/W 3000 95 CDM-18-4027-90-36-DW01 900mA 3030 103 lm/W 3360 90 Linear-style (-DW02) Series Part number Nominal Current Minimum Flux Typical Luminous Efficacy Typical Flux Minimum CRI (Ra) CDM-6-3018-90-18-DW02 300mA 440 90 lm/W 485 90 CDM-6-4027-90-18-DW02 300mA 470 100 lm/W 525 90 CDM-9-3018-90-36-DW02 300mA 860 90 lm/W 960 95 CDM-9-4027-90-36-DW02 300mA 980 100 lm/W 1075 90 CDM-14-3018-90-36-DW02 600mA 1720 90 lm/W 1920 95 CDM-14-4027-90-36-DW02 600mA 1980 100 lm/W 2140 90 CDM-18-3018-90-36-DW02 900mA 2600 90 lm/W 2900 95 CDM-18-4027-90-36-DW02 900mA 2900 100 lm/W 3210 90

PDS-002953 www.luminus.com 4 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 Mechanical, Thermal, Optical and Electrical Characteristics: Product Description Min. CRI (Ra) CCT at over 90% nominal current CCT at below 10% nominal current Light Emitting Surface Diameter Board Size Typical Thermal Resistance (Rthj-c) CDM-6-3018-90-18-DW0x 90 3000K 1800K 6.5mm 12x15mm 2.65 K/W CDM-6-4027-90-18-DW0x 90 4000K 2700K 6.5mm 12X15mm 2.65 K/W CDM-9-3018-90-36-DW0x 95 3000K 1800K 9.5mm 12x15mm 1.8 K/W CDM-9-4027-90-36-DW0x 90 4000K 2700K 9.5mm 12x15mm 1.8 K/W CDM-14-3018-90-36-DW0x 95 3000K 1800K 14.5mm 20x24mm 0.67 K/W CDM-14-4027-90-36-DW0x 90 4000K 2700K 14.5mm 20x24mm 0.67 K/W CDM-18-3018-90-36-DW0x 95 3000K 1800K 16.8mm 20x24mm 0.52 K/W CDM-18-4027-90-36-DW0x 90 4000K 2700K 16.8mm 20x24mm 0.52 K/W CCT Change Dimming Curves:

PDS-002953 www.luminus.com 5 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 “-DW01” Product Family Center Point 3-Step & Nominal CCTs CIEx CIEy θ (°) a b “-DW02” Product Family Center Point 3-Step & Nominal CCTs CIEx CIEy θ (°) a b Note: tolerance of chromaticity measurements (x, y) is +/-.005

PDS-002953 www.luminus.com 6 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086

PDS-002953 www.luminus.com 7 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086

PDS-002953 www.luminus.com 8 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086

PDS-002953 www.luminus.com 9 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 CDM-6 Series Package Dimensions: CDM-9 Series Package Dimensions:

PDS-002953 www.luminus.com 10 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 CDM-14 Series Package Dimensions: CDM-18 Series Package Dimensions:

PDS-002953 www.luminus.com 11 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 Shipping Container (CDM-6 and CDM-9) Shipping Container (CDM-14 and CDM-18): Similar to above but 30 pcs per tray and 150 pcs per box

PDS-002953 www.luminus.com 12 Luminus, Inc. · 1145 Sonora Court · Sunnyvale, CA 94086 Handling Notes for Luminus COBs Luminus products are designed for robust performance in general lighting applications; however, care must be taken when handling and assembling the LEDs into their fixtures. To avoid damag ing Luminus COBs, please follow these guidelines. The following is an overview of the application notes detailing some of the practices to follow hen working with these devices. More detailed information is available on the Luminus website at www.luminus.com General Handling Devices are made to be lifted or carried with tweezers on two “mouse bite” locations. At no time should the devices be handled by or should anything come in contact with the light emitting surf ace (LES) area. There are electrical connections under the LES which, if damaged, will cause the device to fail. Static Electricity LEDs are electronic devices which can be damaged by electrostatic discharge (ESD). Please use appropriate measures to assure the devices do not experience ESD during their handling and/or storage. ESD protection guidelines should be used at all times when working with LEDs. Storage: Luminus products are delivered in ESD shielded bags and should be stored in these bags until used. Assembly: Individuals handling LEDs during assembly should be trained in ESD protection practices. Assemblers should maintain constant conductive contact with a path to ground by means of a wrist strap, ankle straps, mat, or other ESD protection system. Transporting: When transporting the devices from one assembly area to another, ESD shielded cards and carriers should be used. Electrical Contact Luminus COBs are designed with electrical contact pads on their top surface. These pads are clearly ma rked with “+” and “-“ polarity. Wires can be soldered to the contact pads for electrical connections or other solderless connector products are available. If wires are being soldered to the COB product, we recommend attaching these wires prior to mounting the devices to a heat sink. Please contact Luminus for specific recommendations on how to solder wires if not familiar with the standard practice. Luminus can also offer design recommen dations for jigs to enable easy soldering of multiple products in rapid succession. Chemical Compatibility The resin material used to form the emitters inside the LES can getter hydrocarbons from the surrounding environment. As a result, certain chemical compounds are not recommended for use with Luminus products. Use of these compounds can cause damage to the light output of the device and may permanently damage the device. Please refer to www.luminus.com for a list of the compounds not recommended for use with Luminus COB products. Thermal Interface Material (TIM) Proper thermal management is critical for successful operation of any LED system. Excess opera ting temperature can reduce the light output of the device, and excessive heating can cause permanent damage to the device. Proper TIM material is a crucial component for effective heat transfer away from the LED during normal operation. Please refer to www.luminus.com for specific recommendations for TIM solutions. Human Eye Safety Caution must be taken not to stare at the light emitted from Luminus LEDs, as severe eye damage may occur.