CCM XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

250 Watts

  • 250 W Convection Cooled
  • 300 W Peak Rating for 500 ms
  • Very High Efficiency up to 95%
  • Class B Conducted & Radiated Emissions
  • 80 - 275 VAC Operation
  • IT, Industrial & Medical Safety Approvals
  • 3 Year Warranty CCM Series Input Input Voltage • 80-275VAC(Seederatingcurve) Input Frequency • 47-63Hz Input Current • 2.4Atypicalat115VAC,fullload 1.2Atypicalat230VAC,fullload Inrush Current • 30Amaxat230VAC,coldstartat25°C Power Factor • >0.9 Earth Leakage Current • 250µAmaxat264VAC/60Hz Input Protection • InternalT5.0A/250Vfuseinline andneutral Output Output Voltage • 12-48VDC(seetables) Output Voltage Trim • ±3%(seeMechanicalDetails) Initial Set Accuracy • ±0.5%V1,±5%V2 Minimum Load • Nominimumloadrequired Start Up Delay • 1stypical Start Up Rise Time • 50mstypical Hold Up Time • 16msminat115VAC Drift • ±0.2%after20minwarmup Line Regulation • ±0.5%max Load Regulation • ±1%V1,±5%V2 Over/Undershoot • 5%typical Transient Response • 4%max.deviation,recoverytowithin 1%in500µsfora50-75-50%load change Ripple & Noise • 1%pk-pk,20MHzbandwidth Overvoltage Protection• 115-140%Vnom,recycleinputtoreset (V1only) Overload Protection • 125-165%InomV1only Short Circuit Protection• Continuoustripandrestart(hiccupmode) Temperature • 0.05%°C Coefficient Remote On/Off • Uncommittedisolatedoptocouplerdiode, (Inhibit/Enable) powereddiodeinhibitsV1 xppower.com General Efficiency • Upto95% Isolation • 4000VACInputtoOutput,1500VACInput toGround,500VACOutputtoGround Switching Frequency • PFC30-500kHz,Boost25.6kHz, Main51.2kHz Signals • PowerFail-opencollector,transistorofffor ACgood,≥5mswarningoflossofoutput MTBF • 365kHrstoMIL-HDBK-217Fat25°C,GB Environmental Operating Temperature• -20˚Cto+70˚Cderatelinearlyfrom+50°C at2.5%/°Cto50%loadat+70°C. Seederatingcurveandlongformdatasheet forthermalconsiderations.(-40°Cconsult sales) Cooling • Convectioncooled Operating Humidity • 95%RH,non-condensing Storage Temperature • -40°Cto+85°C Operating Altitude • 3000m Shock • 30gpk,halfsine,6axes Vibration • 2grms,5Hzto500kHz,3axes EMC & Safety Low Voltage PSU EMC • EN61204-3,highseveritylevel Emissions • EN55011/22levelBconducted EN55011/22levelBradiated RTCAD0160D21.4Cat.Mradiated MIL-STD461D-F,CE102 Harmonic Currents • EN61000-3-2,classA, EN61000-3-2,classCforloads≥40% Voltage Flicker • EN61000-3-3 Radiated Immunity • EN61000-4-3,level3PerfCriteriaA EFT/Burst • EN61000-4-4,level3PerfCriteriaA Surge • EN61000-4-5,installationclass3 PerfCriteriaA Conducted Immunity • EN61000-4-6,level3PerfCriteriaA, MIL-STD461CS114 Dips & Interruptions • EN61000-4-11,30%10ms,60%100ms, 100%5000ms,PerfCriteriaA,B,B, EN60601-1-2,30%500ms,60%100ms, 100%10ms,100%5000ms,PerfCriteria A,A,A,B-230VAC.Consultlongform datasheetfor115Voperation. Safety Approvals • SeeSafetyApprovals(seenextpage) Equipment Protection • ClassI Class

InputconnectormateswithMolex housing09-50-1051andMolex series5194crimpterminals. CON1mateswithJSThousing PHDR-10VSwithcontactSPHD- 001T-P0.5 Input Voltage & Temperature Derating Safety Approvals 1. Peak duration is 500 ms max, average power must not exceed 250 W. Notes 1.AtACswitchontheoutput(VI)maymomentarilyrisewhentheunitisdisabled usingthe5VstandbysupplyinconjunctionwiththeRemoteOn/Offfunction. (Seelongformdatasheetfordetails) 2.Alldimensionsininches(mm). 4.Weight1.7lb(780g)approx Output Power Output Voltage V1 Output Current V1 Standby Supply V2 Model Number Nominal Peak(1) Nominal Peak(1) 200 150 100 250 80 85 275 Input Voltage (VAC) Peak Power Availability Output Power (W) 300 90 264 200 150 100 250 -20 -10 0 50 Ambient Temperature (°C) Output Power (W) 300 10 40 60 70 Peak Power Availability IEC60950-1CBreport,CSA22.2No. 60950-1,UL60950-1,TUVEN60950-1 IEC60601-1CBreport,CSA22.2No. 60601-1,UL60601-1,TUV60601-1, TUVIEC61010-1 1 2 910 3.94 (100.0) M3 Mounting holes (in 4 positons) Max. penetration by screw to be 0.1 (2.5) from bottom face of chassis Signal Connector CON 1 Output terminals M4 Screws in 2 positions. Torque to 0.8 lbs-in (90 cNm) max Output Voltage Adj. Output terminals allow connection from either top or side (1) CON3 (2) M3 Mounting holes (in 2 positions each side) Max. penetration by screw to be 3.5 mm from outside face of chassis Input Connector 0.94 (23.9) 2.95 (74.9) 0.53 (13.3) 6.00 (152.4) 4.00 (101.6) 0.75 (19.1) 1.73 (44.0) 4.00 (101.6) 1.54 (39.1) Signals Connector CON 1 Pin1 5VStandbyReturn Pin2 5VStandby Pin3 5VStandbyReturn Pin4 5VStandby Pin5 5VStandbyReturn Pin6 5VStandby Pin7 PowerFail(Collector) Pin8 PowerFail(Emitter) Pin9 RemoteOn/Off(Cathode) Pin10 RemoteOn/Off(Anode)