CC712E

712E WILCOXON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company 712E 712E/CC712E Sensitivity, 25°C 8 pC/g, nominal 20 mV/g, ± 10% Acceleration range dependent on external amplifier 100 g peak Amplitude nonlinearity, to 100 g 1% 1% Frequency response, ± 3 dB 0.5 Hz - 20 kHz 0.5 Hz - 20 kHz Resonance frequency >37.5 kHz >37.5 kHz Transverse sensitivity 3% of axial, max 3% of axial Temperature response: –50°C +260°C –10% +20% –10% +20% Capacitance, nominal 1,000 pF - Resistance, min 1,000 MΩ - Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g, broadband - 0.001 g peak Output impedance - <100 Ω Bias output voltage - 12 VDC Grounding case isolated, internally shielded Temperature range –50° to +260°C 712E: –50° to +260°C CC712E: –50° to +95°C Vibration limit 500 g peak 500 g peak Shock limit 5,000 g peak 5,000 g peak Sealing hermetic Base strain 0.002 g/μstrain 0.002 g/μstrain Sensing element design PZT, shear PZT, shear Weight 40 grams (excluding cable) 712E: 40 grams (excluding cable) CC712E: 123 grams Case material 316L stainless steel 712E: 316L stainless steel CC712E: glass reinforced plastic Mounting 8-32 captive screw Integral cabling J3, stainless steel overbraid, 10-32 microdot connector Cable length1 712E/CC712E: 16 ft. 712E/CC712E: 16 ft. buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com SPECIFICATIONS 712E/CC712E Certified accelerometer and charge amplifier system Notes: 1 Available with 13 ft. cable length as model 712E-1/CC712E-1. Key features

• 260°C operation of sensor
• Charge output
• ATEX certified
• Manufactured in an ISO 9001 facility 712E connections (when used with CC712E) Connector pin 10-32 microdot center pin signal outer shell common 98959 Rev.C.1 09/18 Certifications II 1 G Ga Ex ia IIC T2 (-50°C ≤ Ta ≤ +95°C) Amplifier (-50°C ≤ Ta ≤ +260°C) Transducer ATEX certified when used with CC712E charge amplifier CC712E connections Connector pin Function P1 712E input P2 power/signal left V+ / signal center common right shield/ground See reverse for diagrams and dimensions.

Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USAAn Amphenol Company buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com 3/16 HEX SOCKET 0.74 [18.7] CRIMP TUBE 1.27 [32.4] 0.78 [19.8] 8-32 MOUNTING SCREW 3 FT (0.92M) STAINLESS STEEL BRAID Ø.085 [Ø2.16mm] CABLE 0.73 [18.5] 712E CC712E 3/16 HEX SOCKET 0.74 [18.7] CRIMP TUBE 1.27 [32.4] 0.78 [19.8] 8-32 MOUNTING SCREW 3 FT (0.92M) STAINLESS STEEL BRAID Ø.085 [Ø2.16mm] CABLE 0.73 [18.5] 98959 Rev.C.1 09/18 4.33 [110.0] 2.95 [75.0] 1.07 [27.1] 2.20 [55.9] 1.07 [27.1] 2.21 [56.2] 1.31 [33.4] 4.33 2.95 Cable glands 2.21 ACCELEROMETER INPUT POWER/SIGNAL 4.33 [110.0] 2.95 [75.0] 1.07 [27.1] 2.20 [55.9] 1.07 [27.1] 2.21 [56.2] 1.31 [33.4] P2P1 (4) 0.178 THRU MOUNTING HOLES LEFT TO RIGHT V+/SIGNAL COMMON SHIELD/GRND