CBX100 PF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Connect up to 32 scanners to a net- work with ID-NetTM
- Option of upgrading with memory module
- Easy scanner connection by means of clamp terminals
- Degree of protection IP65 Function Devices from the CBX* series enable bar- code scanners to be connected quickly and easily. A wide variety of connections also allows other field devices to be connected. By reducing installation time and the number of system failures when a device is replaced, your operating costs will be significantly lower. Standardized pinning of connections and simple attachment of cable ends using spring terminals ensures easy cable installation. The configuration of the connected scanner can be saved in backup modules and restored at a later date. To facilitate installation of the device, the continuous mounting holes are easy to access and the top section of the housing can be removed. Note: Avoid mechanical stress, such as screwing the housing cover together, in deep-freeze areas. Technical Data Indicators/operating means Display elements 5 LEDs (POWER, TRIGGER, IN 2, OUT 1, OUT 2) Electrical specifications Operating voltage U B 10 ... 30 V DC Current consumption max. 2.5 A Power consumption P 0 max. 3 W Ambient conditions between 0° ... 50° Relative humidity 90 % , noncondensing Shock resistance EN 60068-2-27 30G 11 ms ; 3 impacts on each axis Vibration resistance EN 60068-2-6 1 .5 mm 10 ... 55 Hz ; 2 hours on each axis Mechanical specifications Degree of protection IP65 Connection 25-pin Sub-D socket for Barcode scanner , M16 cable gland for system connection (4x) Material Housing PC (Polycarbonate) Mass 380 g Compliance with standards and direc- tives Directive conformity 89/336 EWG Standard conformity Product standard EN 60947 -5-2:2007 IEC 60947 -5-2:2007 Noise immunity EN 61000-6-2 Degree of protection EN 60529 Dimensions 138 41.4 4 30.8 128 113.5 43.3
Release Date: 2016-05-04 08:59 Date of issue: 2016-11-03 207507_eng.xml
2 Germany: +49 621 776 4411Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. USA: +1 330 486 0001 Singapore: +65 6779 9091 CBX100Connector box Electrical connection Electrical connection READY GOOD TRIGGER COM mode STATUS auto setup auto learn test mode exit Scanner Configuration PC Scanner PWR PS I/O Main Interface Scanner Auxiliary Interface 91011 Power Switch (on/off) Mounting Holes (2x) LEDs Terminal Block Serial Interface (SUB-D, 9-pin) RS485 Terminator Switch ID-NET Terminator Switch Backup Module connector External Power Source (on/off) Adjustment of Shield to Protection Earth via Jumper Adjustment of Chassis Grounding via Jumper Inside View