CBW2448S2.5-6000HS

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 34

Technical content

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 34 Size: Weight: 50.8 x 25.4 x 10.2 mm Options:

• Negative Logic Remote On/Off
• Heatsink

FEATURES

• High Efficiency up to 91%
• Remote ON/OFF Control
• 1600VDC I/O Isolation
• Six-Sided Continuous Shielding
• Single, Dual, and Triple Outputs
• Fixed Switching Frequency
• 4:1 Ultra Wide Input Voltage Ranges
• Protection: SCP / OVP / OLP / OTP
• Up to 30 Watts Output Power
• Standard 2.00” x 1.00” x 0.40” Package
• Wide Operating Temperature Range: -40°C to +85°C
• Compliant to RoHS EU Directive 2011/65/EU
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• CE Marked

DESCRIPTION

The CBW series of DC/DC power converters offers up to 30 Watts of output power in an industry standard 2.00” x 1.00” x 0.40” package. This series has single, dual, and triple output models with 4:1 ultra wide input voltage ranges of 9-36VDC and 18-75VDC. Some features include high efficiency up to 91%, 1600VDC I/O isolation, six-sided shielding, and remote ON/OFF control. These converters are also protected against short circuit, over voltage, over load, and over temperature conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1 safety approvals. This series is best suited for use in wireless networks, telecom/datacom, industry control systems, measurement equipment, and semiconductor equipment. MODEL SELECTION TABLE SINGLE OUTPUT MODELS Model Number Input Voltage Output Voltage Output Current No Load Input Current Ripple & Noise Output Power Maximum Capacitive Load Efficiency Min. load Full load CBW24S1.5-8500

24 VDC

(9 - 36 VDC) 1.5 VDC 0mA 8500mA 70mA 100mVp-p 12.75W 20000µF 80% CBW24S2.5-8000 2.5 VDC 0mA 8000mA 70mA 100mVp-p 20W 20000µF 83% CBW24S3.3-7500 3.3 VDC 0mA 7500mA 70mA 100mVp-p 24.75W 20000µF 86% CBW24S5-6000 5 VDC 0mA 6000mA 105mA 100mVp-p 30W 14400µF 88% CBW24S5.1-6000 5.1 VDC 0mA 6000mA 105mA 100mVp-p 30.6W 14400µF 88% CBW24S12-2500 12 VDC 0mA 2500mA 20mA 150mVp-p 30W 3000µF 89% CBW24S15-2000 15 VDC 0mA 2000mA 30mA 150mVp-p 30W 2000µF 89% CBW48S1.5-8500

48 VDC

(18 - 75 VDC) 1.5 VDC 0mA 8500mA 30mA 100mVp-p 12.75W 20000µF 80% CBW48S2.5-8000 2.5 VDC 0mA 8000mA 45mA 100mVp-p 20W 20000µF 84% CBW48S3.3-7500 3.3 VDC 0mA 7500mA 45mA 100mVp-p 24.75W 20000µF 86% CBW48S5-6000 5 VDC 0mA 6000mA 65mA 100mVp-p 30W 14400µF 88% CBW48S5.1-6000 5.1 VDC 0mA 6000mA 65mA 100mVp-p 30.6W 14400µF 88% CBW48S12-2500 12 VDC 0mA 2500mA 60mA 150mVp-p 30W 3000µF 90% CBW48S15-2000 15 VDC 0mA 2000mA 50mA 150mVp-p 30W 2000µF 91% DUAL OUTPUT MODELS Model Number Input Voltage Output Voltage Output Current No Load Input Current Ripple & Noise Output Power Maximum Capacitive Load Efficiency Min. load Full load CBW24D5-3000 24 VDC (9 - 36 VDC) ±5 VDC 0mA ±3000mA 90mA 100mVp-p 30W ±3000µF 88% CBW24D12-1250 ±12 VDC 0mA ±1250mA 25mA 150mVp-p 30W ±2000µF 87% CBW24D15-1000 ±15 VDC 0mA ±1000mA 25mA 150mVp-p 30W ±1300µF 87% CBW48D5-3000 48 VDC (18 - 75 VDC) ±5 VDC 0mA ±3000mA 50mA 100mVp-p 30W ±3000µF 88% CBW48D12-1250 ±12 VDC 0mA ±1250mA 15mA 150mVp-p 30W ±2000µF 88% CBW48D15-1000 ±15 VDC 0mA ±1000mA 15mA 150mVp-p 30W ±1300µF 88% TRIPLE OUTPUT MODELS Model Number Input Voltage Output Voltage Output Current No Load Input Current Ripple & Noise Output Power Maximum Capacitive Load Efficiency Min. load Full load CBW24T3.312-26 (9 - 36 VDC) 3.3 / ±12 VDC 500mA / ±42mA 5000mA / ±416mA 105mA 50 / 75 mVp-p 26.5W 15000µF / ±340µF 87% CBW24T3.315-26 3.3 / ±15 VDC 500mA / ±33mA 5000mA / ±333mA 105mA 50 / 75 mVp-p 26.5W 15000µF / ±220µF 87% CBW24T512-30 5 / ±12 VDC 400mA / ±42mA 4000mA / ±416mA 105mA 50 / 75 mVp-p 30W 8000µF / ±340µF 88% CBW24T515-30 5 / ±15 VDC 400mA / ±33mA 4000mA / ±333mA 105mA 50 / 75 mVp-p 30W 8000µF / ±220µF 88% CBW48T3.312-26 (18 - 75 VDC) 3.3 / ±12 VDC 500mA / ±42mA 5000mA / ±416mA 55mA 50 / 75 mVp-p 26.5W 15000µF / ±340µF 87% CBW48T3.315-26 3.3 / ±15 VDC 500mA / ±33mA 5000mA / ±333mA 55mA 50 / 75 mVp-p 26.5W 15000µF / ±220µF 87% CBW48T512-30 5 / ±12 VDC 400mA / ±42mA 4000mA / ±416mA 55mA 50 / 75 mVp-p 30W 8000µF / ±340µF 88% CBW48T515-30 5 / ±15 VDC 400mA / ±33mA 4000mA / ±333mA 55mA 50 / 75 mVp-p 30W 8000µF / ±220µF 88%

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 34 SPECIFICATIONS: CBW SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage Range 24VDC nominal input models 9 24 36 VDC 48VDC nominal input models 18 48 75 Start-Up Voltage 24VDC nominal input models 9 VDC 48VDC nominal input models 18 Shutdown Voltage 24VDC nominal input models 8 VDC 48VDC nominal input models 16 Input Surge Voltage (100ms) 24VDC nominal input models 50 VDC 48VDC nominal input models 100 Input Current No Load See Table Input Filter Pi type Input Reflected Ripple Current 20 mAp-p OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Accuracy Single Output Models -1.0 +1.0 % Dual Output Models -1.0 +1.0 % Triple Output Models Main -1.0 +1.0 % Auxiliary -5.0 +5.0 Line Regulation Low line to high line at full load Single Output Models -0.2 +0.2 % Dual Output Models -0.2 +0.2 % Triple Output Models Main -1.0 +1.0 % Auxiliary -5.0 +5.0 Load Regulation Min load to full load Single Output Models -0.5 +0.5 % Dual Output Models -1.0 +1.0 % Triple Output Models Main -1.0 +1.0 % Auxiliary -5.0 +5.0 Cross Regulation (Dual Output Models) Asymmetrical load 25% / 100% full load -5.0 +5.0 % Voltage Adjustability (Single Output Only) See page 4 -10 +10 % Output Power See Table Output Current See Table Minimum Load See Note 3 See Table Maximum Capacitive Load Minimum input and constant resistive load See Table Ripple & Noise 20MHz BW and with a 1µF/50V MLCC Single Output Models See Table 20MHz BW and with a 1µF/50V MLCC Dual Output Models See Table 20MHz BW and with a 0.1µF/50V MLCC Triple Output Models See Table Transient Response Recovery Time 25% load step change 250 µs Start-Up Time Nominal input and constant resistive load Power Up 30 ms Remote On/Off 30 Temperature Coefficient -0.02 +0.02 %/°C REMOTE ON/OFF CONTROL (See Note 2) Positive Logic (standard) The CTRL pin voltage is referenced to –Input DC/DC ON Open or 3V < Vr < 12V DC/DC OFF Short or 0 < Vr < 1.2VDC Negative Logic (optional) The CTRL pin voltage is referenced to –Input DC/DC ON Short or 0 < Vr < 1.2VDC DC/DC OFF Open or 3V < Vr < 12V Input Current of remote Control Pin Nominal input -0.5 +0.5 mA Remote OFF State Input Current Nominal input 3 mA PROTECTION Short Circuit Protection Continuous, automatic recovery Over Load Protection % of full load at nominal input 150 % Over Voltage Protection Zener diode clamp 1.5V output models 2.0 VDC 2.5V output models 3.3 VDC 3.3V output models 3.9 VDC 5V, 5.1V, and ±5V output models 6.2 VDC 12V & ±12V output models 15 VDC 15V & ±15V output models 18 VDC Over Temperature Protection +115 °C

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 3 of 34 SPECIFICATIONS: CBW SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit GENERAL SPECIFICATIONS Efficiency Nominal input voltage and full load See Table Switching Frequency Single & Dual output models 387 430 473 kHz Triple output models 360 400 440 Isolation Voltage 1 minute Input to Output 1600 VDC Input to Case 1600 Output to Case 1600 Isolation Resistance 500VDC 1 GΩ Isolation Capacitance 1500 pF ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature With derating -40 +50 °C Without derating +50 +85 Maximum Case Temperature +105 °C Storage Temperature -55 +125 °C Thermal Impedance (See Note 1) Natural convection 12 °C/W Natural convection with heatsink 10 Relative Humidity 5 95 % RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF Single & Dual Output Models BELLCORE TR-NWT-000332 Case 1: 50% Stress, Ta=40°C 3,163,000 hours MIL-HDBK-217F Notice 2, Ta=25°C, full load (G/B, controlled environment) 434,700 Triple Output Models BELLCORE TR-NWT-000332 Case 1: 50% Stress, Ta=40°C 2,904,000 hours MIL-HDBK-217F Notice 2, Ta=25°C, full load (G/B, controlled environment) 318,400 PHYSICAL SPECIFICATIONS Weight 1.07oz (30.5g) Dimensions (L x W x H) 2.00 x 1.00 x 0.40 inch (50.8 x 25.4 x 10.2 mm) Case Material Nickel-coated copper Base Material FR4 PCB Potting Material Epoxy (UL94-V0) Shielding Six-sided Case Grounding Connect case to –Input with decoupling Y Cap SAFETY & EMC CHARACTERISTICS Safety Approvals IEC60950-1, UL60950-1, EN60950-1 EMI (See Note 4) EN55022 Class A ESD EN61000-4-2 Air ±8kV and Contact ±6kV Perf. Criteria A Radiated Immunity EN61000-4-3 10 V/m Perf. Criteria A Fast Transient (See Note 5) EN61000-4-4 ±2kV Perf. Criteria A Surge (See Note 5) EN61000-4-5 ±1kV Perf. Criteria A Conducted Immunity EN61000-4-6 10 Vrms Perf. Criteria A NOTES 1. Heat sink is optional. To order the module with a heatsink please add the suffix “HS” to the model number (Ex: CBW24S12-2500HS). 2. Positive remote on/off control is standard; for negative remote on/off please add the suffix “R” to the model number (Ex: CBW24S12- 2500R). 3. Triple output models require a minimum loading on the output to maintain all specified regulations. Operation under no-load conditions will not damage these devices; however, they may not meet all listed specifications. 4. The CBW series standard models can only meet EN55022 Class A and Class B with external components added. 5. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. - 24VDC nominal input models: Nippon chemi-con KY series, 330μF/50V - 48VDC nominal input models: Nippon chemi-con KY series, 220μF/100V CAUTION: This power converter is not internally fused. An input line fuse must always be used. Due to advances in technology, specifications subject to change without notice.

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 4 of 34 OUTPUT VOLTAGE ADJUSTMENT Output voltage adjustability is for single output models only. Output voltage set-point adjustment allows the user to increase or decrease the output voltage set-point of a module. This is accomplished by connecting an external resistor between the TRIM pin and either the +OUTPUT or –OUTPUT pins. With an external resistor between the TRIM and –OUTPUT pins, the output voltage set-point increases. With an external resistor between the TRIM and +OUTPUT pins, the output voltage set-point decreases. The external TRIM resistor needs to be at least 1/16W resistance. Trim Up Trim Down CBWXXS1.5-8500 CBWXXS2.5-8000 Trim Vout,up RU Trim Vout,up RU 1% 1.515V 4.578kΩ 1% 2.525V 37.076kΩ 2% 1.530V 2.065kΩ 2% 2.550V 16.675kΩ 3% 1.545V 1.227kΩ 3% 2.575V 9.874kΩ 4% 1.560V 0.808kΩ 4% 2.600V 6.474kΩ 5% 1.575V 0.557kΩ 5% 2.625V 4.434kΩ 6% 1.590V 0.389kΩ 6% 2.650V 3.074kΩ 7% 1.605V 0.270kΩ 7% 2.675V 2.102kΩ 8% 1.620V 0.180kΩ 8% 2.700V 1.374kΩ 9% 1.635V 0.110kΩ 9% 2.725V 0.807kΩ 10% 1.650V 0.054kΩ 10% 2.750V 0.354kΩ CBWXXS3.3-7500 CBWXXS5-6000 Trim Vout,up RU Trim Vout,up RU 1% 3.333V 57.930kΩ 1% 5.050V 36.570kΩ 2% 3.366V 26.465kΩ 2% 5.100V 16.580kΩ 3% 3.399V 15.577kΩ 3% 5.150V 9.917kΩ 4% 3.432V 10.283kΩ 4% 5.200V 6.585kΩ 5% 3.465V 7.106kΩ 5% 5.250V 4.586kΩ 6% 3.498V 4.988kΩ 6% 5.300V 3.253kΩ 7% 3.531V 3.476kΩ 7% 5.350V 2.302kΩ 8% 3.564V 2.341kΩ 8% 5.400V 1.588kΩ 9% 3.597V 1.459kΩ 9% 5.450V 1.032kΩ 10% 3.630V 0.753kΩ 10% 5.500V 0.588kΩ CBWXXS5.1-6000 CBWXXS12-2500 Trim Vout,up RU Trim Vout,up RU 1% 5.151V 38.135kΩ 1% 12.120 367.908kΩ 2% 5.202V 17.368kΩ 2% 12.240 165.954kΩ 3% 5.253V 10.446kΩ 3% 12.360 98.636kΩ 4% 5.304V 6.985kΩ 4% 12.480 64.977kΩ 5% 5.355V 4.908kΩ 5% 12.600 44.782kΩ 6% 5.406V 3.524kΩ 6% 12.720 31.318kΩ 7% 5.457V 2.535kΩ 7% 12.840 21.701kΩ 8% 5.508V 1.793kΩ 8% 12.960 14.488kΩ 9% 5.559V 1.217kΩ 9% 13.080 8.879kΩ 10% 5.610V 0.755kΩ 10% 13.200 4.391kΩ CBWXXS15-2000 Trim Vout,up RU 1% 15.150V 404.184kΩ 2% 15.300V 180.592kΩ 3% 15.450V 106.061kΩ 4% 15.600V 68.796kΩ 5% 15.750V 46.437kΩ 6% 15.900V 31.531kΩ 7% 16.050V 20.883kΩ 8% 16.200V 12.898kΩ 9% 16.350V 6.687kΩ 10% 16.500V 1.718kΩ CBWXXS1.5-8500 CBWXXS2.5-8000 Trim Vout,down RD Trim Vout,down RD 1% 1.485V 5.704kΩ 1% 2.475V 49.641kΩ 2% 1.470V 2.571kΩ 2% 2.450V 22.481kΩ 3% 1.455V 1.527kΩ 3% 2.425V 13.428kΩ 4% 1.440V 1.005kΩ 4% 2.400V 8.902kΩ 5% 1.425V 0.692kΩ 5% 2.375V 6.186kΩ 6% 1.410V 0.483kΩ 6% 2.350V 4.375kΩ 7% 1.395V 0.334kΩ 7% 2.325V 3.082kΩ 8% 1.380V 0.222kΩ 8% 2.300V 2.112kΩ 9% 1.365V 0.135kΩ 9% 2.275V 1.358kΩ 10% 1.350V 0.065kΩ 10% 2.250V 0.754kΩ CBWXXS3.3-7500 CBWXXS5-6000 Trim Vout,down RD Trim Vout,down RD 1% 3.267V 69.470kΩ 1% 4.950V 45.533kΩ 2% 3.234V 31.235kΩ 2% 4.900V 20.612kΩ 3% 3.201V 18.490kΩ 3% 4.850V 12.306kΩ 4% 3.168V 12.117kΩ 4% 4.800V 8.152kΩ 5% 3.135V 8.294kΩ 5% 4.750V 5.660kΩ 6% 3.102V 5.745kΩ 6% 4.700V 3.999kΩ 7% 3.069V 3.924kΩ 7% 4.650V 2.812kΩ 8% 3.036V 2.559kΩ 8% 4.600V 1.922kΩ 9% 3.003V 1.497kΩ 9% 4.550V 1.230kΩ 10% 2.970V 0.647kΩ 10% 4.500V 0.676kΩ CBWXXS5.1-6000 CBWXXS12-2500 Trim Vout,down RD Trim Vout,down RD 1% 5.049V 47.191kΩ 1% 11.880V 460.992kΩ 2% 4.998V 21.431kΩ 2% 11.760V 207.946kΩ 3% 4.947V 12.844kΩ 3% 11.640V 123.597kΩ 4% 4.896V 8.551kΩ 4% 11.520V 81.423kΩ 5% 4.845V 5.975kΩ 5% 11.400V 56.118kΩ 6% 4.794V 4.258kΩ 6% 11.280V 39.249kΩ 7% 4.743V 3.031kΩ 7% 11.160V 27.199kΩ 8% 4.692V 2.111kΩ 8% 11.040V 18.162kΩ 9% 4.641V 1.396kΩ 9% 10.920V 11.132kΩ 10% 4.590V 0.823kΩ 10% 10.800V 5.509kΩ CBWXXS15-2000 Trim Vout,down RD 1% 14.850V 499.816kΩ 2% 14.700V 223.408kΩ 3% 14.550V 131.272kΩ 4% 14.400V 85.204kΩ 5% 14.250V 57.563kΩ 6% 14.100V 39.136kΩ 7% 13.950V 25.974kΩ 8% 13.800V 16.102kΩ 9% 13.650V 8.424kΩ 10% 13.500V 2.282kΩ

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 5 of 34 MECHANICAL DRAWING Single & Dual Output Models Triple Output Models

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 6 of 34 CHARACTERISTIC CURVES *Curves for CBW24D5-3000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 7 of 34 CHARACTERISTIC CURVES *Curves for CBW24D12-1250. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 8 of 34 CHARACTERISTIC CURVES *Curves for CBW24D15-1000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 9 of 34 CHARACTERISTIC CURVES *Curves for CBW48D5-3000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 10 of 34 CHARACTERISTIC CURVES *Curves for CBW48D12-1250. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 11 of 34 CHARACTERISTIC CURVES *Curves for CBW48D15-1000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 12 of 34 CHARACTERISTIC CURVES *Curves for CBW24S1.5-8500. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 13 of 34 CHARACTERISTIC CURVES *Curves for CBW24S2.5-8000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 14 of 34 CHARACTERISTIC CURVES *Curves for CBW24S3.3-7500. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 15 of 34 CHARACTERISTIC CURVES *Curves for CBW24S5-6000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 16 of 34 CHARACTERISTIC CURVES *Curves for CBW24S5.1-6000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 17 of 34 CHARACTERISTIC CURVES *Curves for CBW24S12-2500. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 18 of 34 CHARACTERISTIC CURVES *Curves for CBW24S15-2000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 19 of 34 CHARACTERISTIC CURVES *Curves for CBW48S1.5-8500. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 20 of 34 CHARACTERISTIC CURVES *Curves for CBW48S2.5-8000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 21 of 34 CHARACTERISTIC CURVES *Curves for CBW48S3.3-7500. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 22 of 34 CHARACTERISTIC CURVES *Curves for CBW48S05-6000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 23 of 34 CHARACTERISTIC CURVES *Curves for CBW48S5.1-6000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 24 of 34 CHARACTERISTIC CURVES *Curves for CBW48S12-2500. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 25 of 34 CHARACTERISTIC CURVES *Curves for CBW48S15-2000. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vout Rise Characteristic Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 26 of 34 CHARACTERISTIC CURVES *Curves for CBW24T3.312-26. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 27 of 34 CHARACTERISTIC CURVES *Curves for CBW24T3.315-26. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 28 of 34 CHARACTERISTIC CURVES *Curves for CBW24T512-30. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 29 of 34 CHARACTERISTIC CURVES *Curves for CBW24T515-30. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 30 of 34 CHARACTERISTIC CURVES *Curves for CBW48T3.312-26. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 31 of 34 CHARACTERISTIC CURVES *Curves for CBW48T3.315-26. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 32 of 34 CHARACTERISTIC CURVES *Curves for CBW48T512-30. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 33 of 34 CHARACTERISTIC CURVES *Curves for CBW48T515-30. All test conditions are at 25ºC. Efficiency vs. Output Load Efficiency vs. Input Voltage, Full Load Power Dissipation vs. Output Load Derating Output Load vs. Ambient Temp. & Airflow Vin=Vin(nom) Derating Output Load vs. Ambient Temperature with Heatsink & Airflow, Vin=Vin(nom) Typ. Output Ripple & Noise, Vin=Vin(nom), Full Load Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load, Vin=Vin(nom) Typical Input Start-Up & Output Rise Characteristic, Vin=Vin(nom), Full Load Using ON/OFF Voltage Start-Up and Vo Rise Characteristic, Vin=Vin(nom), Full Load

Up to 30 Watts, DC/DC Power Converters 11/29/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778- 9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 34 of 34 MODEL NUMBER SETUP Single Output Models CBW 24 S 12 - 2500 R HS Series Name Input Voltage Output Quantity Ouptut Voltage Output Current Remote On/Off Heatsink 24: 9 - 36 VDC S: Single Output 1.5 1.5V 2000: 2000mA None: positive Logic None: No Heatsink 48: 18 - 75 VDC 2.5 2.5V 2500: 2500mA R: negative Logic HS: With Heatsink 3.3: 3.3V 6000: 6000mA 5: 5V 7500: 7500mA 5.1 5. 1V 8000: 8000mA 12: 12V 8500: 8500mA 15: 15V Dual Output Models CBW 24 D 12 - 1250 R HS Series Name Input Voltage Output Quantity Ouptut Voltage Output Current Remote On/Off Heatsink 24: 9 - 36 VDC D: Dual Output 5: ±5V 1000: ±1000mA None: positive Logic None: No Heatsink 48: 18 - 75 VDC 12: ±12V 1250: ±1250mA R: negative Logic HS: With Heatsink 15: ±15V 3000: ±3000mA Triple Output Models CBW 24 T 512 - 30 R HS Series Name Input Voltage Output Quantity Ouptut Voltage Output Power Remote On/Off Heatsink 24: 9 - 36 VDC T: Triple Output 3.312: 3.3V / ±12V 26: 26.5 Watts None: positive Logic None: No Heatsink 48: 18 - 75 VDC 3.315: 3.3V / ±15V 30: 30 Watts R: negative Logic HS: With Heatsink 512: 5V / ±12V 515: 5V / ±15V COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in- house research and development engineers will provide a solution that exceeds your performance requirements on- time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833