CBT-90-G-L11-CK100

CBT-90TE LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Applications

• Fiber-coupled Illumination
• Architectural and Entertainment Lighting
• Medical Lighting
• Machine Vision
• Microscopy
• Displays and Signage
• General Illumination
• Spot Lighting
• Emergency Vehicle Lighting
• Projection Systems Features:
• Large, monolithic chip with uniform emitting area of 9 mm2
• Wide color gamut available from Red , Green, Blue single color LEDs. White and UV CBT-90 LEDs are also available with the same package format
• Ultra High thermal conductivity package allows operation at up to 27A CW.
• High precision LEDs placement on copper core PCB for easier thermal management and optical integration
• Unencapsulated die with low profile protective window optimizes optical coupling in etendue-limited applications
• Environmentally friendly: RoHS and Halogen compliant Table of Contents Monochrome Binning Optical and Electrical Angular Distribution and Mechanical Dimensions .. 11 Packaging Information ... 13 PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved

1145 Sonora Court • Sunnyvale, CA 94086

CBT-90 TE Product Datasheet

Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40ºC heat sink and allowing the device to reach thermal equilibrium while fully powered. Only after the device reaches equilibrium are the measurements taken. This method of measurement ensures that Luminus LEDs perform in the field just as they are specified. Expected flux values in real world operation can be extrapolated based on the information contained within this product data sheet. Understanding Luminus LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’ products. PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved CBT-90 TE Product Datasheet Luminus LED Technology Luminus’ Devices vertical chip LED technology enables large area LED chips with uniform brightness over the entire LED chip surface. The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot. Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to heat sink of 0.5º C/W, Luminus CBT-90 LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. Reliability Designed from the ground up, Luminus LEDs are one of the most reliable light sources in the world today. Luminus LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus LEDs are ready for even the most demanding applications. Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury. Technology Overview Luminus LEDs™ benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency.

CBT-90 Monochromatic Binning Structure All CBT-90 monochromatic LEDs are tested for luminous flux/ dominant wavelength and placed into one of the following flux/ wave length bins. The binning structure is universally applied across each monochromatic color of the CBT-90 product line. PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Bin (FF) Minumum Flux (lm) @ 13.5A Maximum Flux (lm) @ 13.5A Min Power (Watts) @ 13.5A Max Power (Watts) @ 13.5A Red BM 770 970 BN 970 1150 BP 1150 1350 BQ 1350 1570 Green CK 1,500 2,000 CM 2,000 2,300 CN 2,300 2,600 Blue G 8.3 9.1 H 9.1 10.0 J 10.0 11.0 K 11.0 12.1 Flux Bins* Color Wavelength Bin Minumum Wavelength @ 13.5A Maximum Wavelength @ 13.5A Red (Dominant WL) R2 611 615 R3 615 619 R4 619 623 R5 623 627 R6 627 631 Green (Dominant WL) G2 510 515 G3 515 520 G4 520 525 G5 525 530 G6 530 535 G7 535 540 Blue (Peak WL) 445 445 450 450 450 455 455 455 460 460 460 465 465 465 470 *Note: Luminus maintains a +/- 6% tolerance on flux measurements. Wavelength Bins CBT-90 TE Product Datasheet

Ordering Information

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Ordering Part Number 1,2,3 Color Description CBT-90-RX-L15-BM100 Red Red LED™ CBT-90 consisting of 9 mm2 LED, thermistor, and connector mounted on a copper-core PCB. CBT-90-G-L11-CK100 Green Green LED™ CBT-90 consisting of 9 mm2 LED, thermistor, and connector mounted on a copper-core PCB. CBT-90-B-L11-G100 Blue Blue CBT-90 consisting of 9 mm2 LED, thermistor, and connector mounted on a copper-core PCB. CBT-90 TE Product Datasheet Note 1: A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. Individual flux bins are not orderable.. Note 2: Flux Bin listed is minimum bin shipped - higher bins may be included at Luminus’ discretion Note 3: CBT-90-RX-L15-BM100 represents a red CBT-90 Device with a minimum Flux of 770lm and a Dominant Wavelength between 611-631nm CBT-90-G-L11-CK100 represents a green CBT-90 Device with a minimum flux of 1500lm and a Dominant Wavelength between 510-540nm CBT-90-B-L11-J100 represents a blue CBT-90 Device with a minimum Power of 10Watts and a Peak Wavelength between 445-470nm Part Number Nomenclature Product Family Chip Area Color Package Configuration Bin Kit 1,2,3 CBT: Copper-core PCB, No Encap- sulation 90: 9 mm2 RX= Red G= Green B= Blue L15: 28 mm x 26.75 mm - Common Cathode Package L11: 28 mm x 26.75 mm - Common Anode Package See Mechanical Drawing section See page 5 for complete bin definition table

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Wavelength Bins Kit Number Min. Flux Bin Min. Flux/ Power Red BM 770 lm R2, R3, R4, R5, R6 BM100 R3, R4, R5 BM101 BN 970 lm R2, R3, R4, R5, R6 BN100 R3,R4,R5 BN101 Green CK 1,500 lm G2, G3, G4, G5, G6, G7 CK100 G4, G5, G6 CK101 CM 2,000 lm G2, G3, G4, G5, G6, G7 CM100 G4, G5, G6 CM101 Blue G 8.30 W 445,450,455,460,465 G100 450,455,460 G101 H 9.10 W 445,450,455,460,465 H100 450,455,460 H101 J 10.0 W 445,450,455,460,465 J100 450,455,460 J101 CBT-90 TE Product Datasheet CBT-90 Orderable Bin Kits

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Optical & Electrical Characteristics General Characteristics Symbol Red8 Green Blue Unit Emitting Area 9.0 9.0 9.0 mm2 Characteristics at Recommended Test Drive Current , If 1, 2,3 Reference Duty Cycle 100 100 100 % Test Peak Drive Current typ IF 13.5 13.5 13.5 A Peak Luminuous Flux4,5,6 typ Φv 1,030 2,100 500 lm Peak Radiometric Flux4,5,6 typ Φr 5.3 4.4 10.3 W Dominant Wavelength4 typ λd 620 527 460 nm Peak Wavelength4 typ λd 631 520 456 nm FWHM- Spectral bandwidth at 50% of Φv4 typ 17 35 21 nm Chromaticity Coordinates 7 typ x .694 .173 .146 typ y .306 .712 .035 Forward Voltage min VF min 2 2.9 2.9 V typ VF 2.8 4.5 3.5 V max VF max 3.8 5.5 4.8 V Dynamic Resistance typ Ωdyn 0.03 0.05 0.02 Ω Device Thermal Characteristics Thermal Coefficient of Photometric Flux typ -1 -0.2 -0 % / oC Thermal Coefficient of Radiometric Flux typ -0.7 -0.2 -0.2 % / oC Forward Voltage Temperature Coefficient typ -1.6 -2 -3 mV/ oC CBT-90 TE Product Datasheet Typical Device Performance

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved CBT-90 TE Product Datasheet Optical & Electrical Characteristics Absolute Maximum Ratings Symbol Red Green Blue Unit Absolute Minimum Current (CW or Pulsed)8,9 0.2 0.2 0.2 A Absolute Maximum Current (CW) 10 27 27 27 A Absolute Maximum Surge Current 10, (Frequency > 240 Hz, duty cycle =10%, t=1ms) 31.5 31.5 31.5 A Absolute Maximum Junction Temperature 10 Tjmax 125 150 150 ºC Storage Temperature Range -40/+100 -40/+100 -40/+100 ºC Note 1: All ratings are based on operation with a constant heat sink temperature Ths =40ºC. See Thermal Resistance section for Ths definition. Note 2: CBT-90 RGB devices can be driven at currents ranging from 200mA to 27A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements.I n pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. Note 3: Tested at Current Density of 1.5 A/mm2. Note 4: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 13.5 A. Note 5: Total flux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power level. For specific minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus. Note 6: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye. Note 7: In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1. Note 8: For reference only. Note 9: Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information. Note 10: CBT-90 RGB LEDs are designed for operation to an absolute maximum current and temperature as specified above. Product lifetime data is specified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents or temperatures will result in a reduction of device life ime compared to recommended conditions. Refer to the lifetime derating curves for further information.

Relative Output Flux vs. Forward Current1 Forward Current vs. Forward Voltage Relative Output Flux vs. Forward Current1 Forward Current vs. Forward Voltage Relative Output Flux vs. Forward Current1 Forward Current vs. Forward Voltage PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Optical & Electrical Characteristics CBT-90 TE Product Datasheet

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Light Output and Spectral Characteristics Over Heat Sink Temperature Note 1: Typical spectrum at current density of 0.35 A/mm2 in continuous operation. Typical Spectrum1 CBT-90 TE Product Datasheet 0.2 0.4 0.6 0.8 1.2 -90 -70 -50 -30 -10 10 30 50 70 90 Normalized Intensuty Angle [degrees] Red Cosine function 0.2 0.4 0.6 0.8 1.2 -90 -70 -50 -30 -10 10 30 50 70 90 Normalized Intensuty Angle [degrees] Green Cosine function 0.2 0.4 0.6 0.8 1.2 -90 -70 -50 -30 -10 10 30 50 70 90 Normalized Intensuty Angle [degrees] Blue Cosine function Angular Intensity Distribution (Typical)

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Thermal Resistance Typical Thermal Resistance Rθj-b1 0.5 ºC/W Rθb-hs1 0.1 ºC/W Rθj-hs2 0.6 ºC/W Rθj-ref1 0.5 ºC/W Note 1: Thermal resistance values are based on FEA model results correlated to measured Rθj-hs data. Note 2: Thermal resistance is measured using eGraf 1205 thermal interface material. Thermistor Information The thermistor used in CBT-90 LEDs mounted on core-boards is from Murata Manufacturing Co. The global part number is NCP15XH103J03RC. Please see http://www.murata.com/ for details on calculating thermistor temperature. Electrical Pinout 100 125 0 5 10 15 20 Temperature ( ° C) Resistance (K ohm) CBT-90 TE Product Datasheet

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Mechanical Dimensions – CBT-90-RX Common Cathode LED ',((0,77,1* $5($ ',((0,77,1* $5($ 6(&7,21(( '(7$,/& ':* ',0(16,21 Recommended connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNG14-250FL-C Thermistor Connector: MOLEX P/N 53780-0270 or GCT P/N WTB08-021S-F. Recommended Female: MOLEX P/N 51146-0200, GCT P/N WTB06-021S-F or equivalent For detailed drawing please refer to DWG-002506 document CBT-90 TE Product Datasheet

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Mechanical Dimensions – CBT-90-G,B Common Anode LED ',((0,77,1* $5($ ',((0,77,1* $5($ 6(&7,21(( '(7$,/& ':* ',0(16,21 Recommended connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNG14-250FL-C Thermistor Connector: MOLEX P/N 53780-0270 or GCT P/N WTB08-021S-F. Recommended Female: MOLEX P/N 51146-0200, GCT P/N WTB06-021S-F or equivalent For detailed drawing please refer to DWG-002309 document CBT-90 TE Product Datasheet

41.40 PITCH SECTION A-A TYP0.76 TYP 19.81 TOP TRAY SHOWN TRANSPARENT FOR REFERENCE ONLY 6.35 127 254 266.70 139.70 51.05 203.71 57.15 AA DIMENSIONS IN MILLIMETERS PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved For detailed drawing of shipping trays, please refer to document TO-0479, available upon request. Shipping Tray Outline CBT-90 TE Product Datasheet

PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved Shipping Box Quantity Material Dimensions (L x W x H, mm) Carton Box 1 -20 packs (50 - 1000 Devices) S4651 560 x 560 x 200 Packing and Shipping Specification (CBT-90) Sample label –for illustration only Label Fields (subject to change):

• 6-8 digit Box number (for Luminus internal use)
• Luminus ordering part number
• Quantity of devices in pack
• Part number revision (for Luminus internal use)
• Customer’s part number (optional)
• Bin (FF-WW) as defined page 3
• 2D Bar code Product Label Specification Packing Configuration Qty /Pack Reel Dimensions (diameter x W, mm) Gross Weight (kg) Stack of 5 trays with 10 devices per tray Each pack is enclosed in ESD bag 50 150 x 280 x 85 2.7 Packing Specification CBT-90 TE Product Datasheet

Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries. PDS-002547 Rev 05 © 2017 Luminus Devices, Inc . - All Rights Reserved 01 12/01/2015 Initial Release - Preliminary Specifications 02 02/09/2015 Editorial Changes and Update of Blue Bin Kit Offering 03 02/15/2015 Corrected Green Bin Kit Definition 04 06/17/2017 Revised wording in last page; Removed “Preliminary” 05 07/19/2017 Updated Red flux bin CBT-90 TE Product Datasheet