CBM-40 LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Sky Blue Chip On Board LEDs PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

1145 Sonora Court • Sunnyvale, CA 94086

Applications:

  • Machine Vision
  • Fiber-coupled illumination
  • Microscopy and Fluorescence Applications
  • Medical and Scientific Instrumentation Features:
  • High-power LED with surface emitting area of 3.84 mm2 and 1:1 aspect ratio
  • Sky Blue color with emission at 470nm typical peak wavelength
  • Typical radiometric power output of 5.5W at 6A (standard test condition)
  • All the benefits of chip on board processing without the need for complicated assembly process
  • Vertical chip Blue LED technology for high power density and uniform emission
  • High thermal conductivity copper coreboard package (common cathode)
  • Low-profile window for efficient coupling into small-etendue systems
  • Can be operated at variable drive currents up to 6A
  • Environmentally friendly: RoHS and Halogen compliant CBM-40-SB Product Datasheet Table of Contents Optical & Electrical Mechanical Dimensions Packaging Specifications . 12

Luminus LEDs benefit from innovations in device technology, chip packaging and thermal management. This suite of technologies give engineers and system designers the freedom to develop solutions both high in power and efficiency. Luminus LED Technology Luminus Devices vertical chip technology enables LED chips with uniform brightness over the entire chip surface. The optical power and brightness produced by these densely packed arrays of devices enable solutions not possible with single chip packages that be used to replace arc and halogen lamps. Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to board of 1.15 ºC/W, Luminus CBM-40 LEDs exhibit very low thermal resistance. This will allow the LEDs to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All LED products manufactured by Luminus are RoHS and Halogen compliant and free of hazardous materials, including lead and mercury. Reliability With designs based on years of chip and packaging development experience, Luminus LEDs are one of the most reliable light sources in the world today. Luminus LEDs pass a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that can exceed 30,000 hours, Luminus LEDs are ready for even the most demanding applications. Static Electricity Luminus CBM-40-SB LEDs are sensitive to static electricity, and care should be taken when handling them. Static electricity or surge voltage will damage the LEDs. It is recommended to wear an anti-electrostatic wristband or anti-electrostatic gloves when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken to isolate LED processing equipment from potential sources of voltage surges. Reference: APN-002815 "Electrical Stress Damage to LEDs and How to Prevent It" . Understanding CBM-40-SB LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus products. Testing Temperature Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40ºC heat sink and measuring the device while fully powered. This method of measurement ensures that Luminus LEDs perform in the field just as they are specified. Multiple Operating Points The tables on the following pages provide typical optical and electrical characteristics for the standard drive conditions. Since the LEDs can be operated over a wide range of drive conditions(currents from 200 mA to 6 A, and duty cycle from <1% to 100%) there are many other potential values attainable. Driving devices beyond recommended driving conditions shortens lifetime. CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

Ordering Information

Product Ordering Part Number Description CBM-40-SB CBM-40-SB-C32-FF###-## CBM-40 Sky Blue chipset consisting of 4x1mm2 Sky Blue (470nm) LEDs, a thermistor, connectors and a copper-core PCB. Note 1: A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. Individual flux bins are not orderable. Note 2: Flux Bin listed is minimum bin shipped - higher bins may be included at Luminus discretion. Part Number Nomenclature Product Family Chip Area Color Package Configuration Bin Kit 1,2 CBM: Copper- core PCB, Array 40: 4 mm2 class SB: Sky Blue C32: 26.5 mm x 16.0 mm See page 5 for complete bin definition table CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

CBM-40-SB Binning Structure CBM-40-SB LEDs are specified for radiometric flux and chromaticity/wavelength at a drive current of 6 A (1.5 A/mm2) and placed into one of the following Power Bins and Wavelength Bins: Color Power Flux Bin (FF) Minimum Flux (W) Maximum Flux (W) SB DC 4.7 5.0 EA 5.0 5.5 EB 5.5 6.0 FA 6.0 6.5 Note 3: Luminus maintains a +/- 6% tolerance on power measurements. Color Wavelength Bin (###) Minimum Wavelength (nm) Maximum Wavelength (nm) SB 460 460 465 465 465 470 470 470 475 475 475 480 Peak Wavelength Bins Power Bins3 CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

Bin Kit NumberBin Kit Flux Code Min. Flux (W) 460-480 DC 4.7 460, 465, 470, 475 DC460 CBM-40-SB Bin Kits CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

Reference Optical & Electrical Characteristics (Ths = 40°C) 4,5 SB Parameter Symbol Values 6 Unit Peak Wavelength Range λ 460-480 nm Drive Conditions 7 I 6.0 A Peak Wavelength Typ. λp 467 nm Forward Voltage VF min 2.5 V VF 3.3 V VF max 4.0 V Radiometric Flux 8 Φtyp 5.5 W FWHM at 50% of Φ Δλ1/2 26 nm Parameter Symbol Values Unit Absolute Minimum Current (CW or Pulsed) 9 0.2 A Absolute Maximum Current (CW) 10 6 A Absolute Maximum Surge Current 10 (Frequency > 240 Hz, duty cycle =10%, t=1ms) 8 A Maximum Junction Temperature 11 Tjmax 115 °C Storage Temperature Range -40 to +100 °C Emitting Area 3.84 mm2 Emitting Area Dimensions 1.96 x 1.96 mm × mm Note 4: Data verified using NIST traceable calibration standard. Note 5: All data are based on test conditions with a constant heat sink temperature Ths = 40°C under pulse testing conditions. Single pulse conditions: 20 ms pulse length, 3 second soak. Note 6: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 6 A. Note 7: Listed drive conditions are typical for common applications. CBM-40-SB devices can be driven at CW currents ranging from 200 mA to 6 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Note 8: Typical total flux from emitting area at listed peak wavelength. Reported performance is included to show trends for a selected power level. For specific minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus. Note 9: Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information. Note 10: CBM-40-SB LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is specified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents will result in a reduction of device life time compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Note 11: Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

Optical & Electrical Characteristics Relative Power vs Forward Current, T hs = 40°C Relative Power vs Junction Temperature Relative Peak Wavelength vs Forward Current Rel. Peak Wavelength vs Junction Temperature Relative Forward Voltage vs Forward Current Rel. Forward Voltage vs Junction Temperature CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved 20% 40% 60% 80% 100% 120% 140% 160% 0 1 2 3 4 5 6 7 8 9 10 Relative Radiometric Power If (A) -4.0 -2.0 0.0 2.0 4.0 6.0 8.0 10.0 0 1 2 3 4 5 6 7 8 9 10 Δ Peak Wavelength (λp) If (A) 80% 85% 90% 95% 100% 105% 110% 0 10 20 30 40 50 60 70 80 90 100 Relative Radiometric Power Tj (°C) -2.0 -1.0 0.0 1.0 2.0 3.0 4.0 10 20 30 40 50 60 70 80 90 100 Δ Peak Wavelength (λp) Tj (°C) -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0 10 20 30 40 50 60 70 80 90 100 Δ Forward Voltage (Vf) Tj (°C) -0.80 -0.60 -0.40 -0.20 0.00 0.20 0.40 0 1 2 3 4 5 6 7 8 9 10 Δ Forward Voltage (Vf) If (A)

Note 12: Typical spectrum at current of 6 A in continuous operation and at 40°C heat sink temperature. Note 13: Detailed information on emission including ray trace files can be found at: http://www.luminus.com Typical Spectrum 12 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 400 420 440 460 480 500 520 540 560 580 600 Intensity (a.u.) Wavelength (nm) Angular Distribution12,13 0.2 0.4 0.6 0.8 1.0 0°10° 20° 30° 40° 50° 60° 70° 80° 90° CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

Thermal Resistance CBM-40-SB Note 14: Real thermal resistance data - “Electrical” thermal resistance values available upon request Note 15: Thermal Resistance is based on eGraf 1205 Thermal interface. Rθj-b 14 1.00 °C/W Rθb-hs 15 0.15 °C/W Rθj-hs 15 1.15 °C/W Rθj-ref 1.18 °C/W Thermistor Information The thermistor used in CBM-40 devices is NCP18XH103J03RB. Please see http://www.murata.com/ for details on calculating thermistor temperature. For more information on use of the thermistor, please contact Luminus directly at techsupport@luminus.com. CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

Mechanical Dimensions – CBM-40-SB LED

  • Connector Manufacturer: Tarng-Yu: Part # TU1512HNO-08-M5
  • Mating Connector Cable Assembly ordering part number (small quantity orders for evaluation purposes only): 960041 CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved Mating Connector Information:

Shipping Tray Outline - CBM-40-SB 3,7&+ 7<3 7<3 6(&7,21$$ )255()(5(1&(21/< CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

Shipping Box Quantity Material Dimensions (L x W x H, mm) Carton Box 1 -20 packs S4651 560 x 560 x 200 Packing and Shipping Specification (CBM-40) Sample label –for illustration only Label Fields (subject to change):

  • 6-8 digit Box number (for Luminus internal use)
  • Luminus ordering part number
  • Quantity of devices in pack
  • Part number revision (for Luminus internal use)
  • Customer’s part number (optional)
  • Flux Bin
  • 2D Bar code Product Label Specification Packing Configuration Qty /Pack Box Dimensions (diameter x W, mm) Gross Weight (kg) Stack of 5 trays with 10 devices per tray Each pack is enclosed in ESD bag 50 95 x 176 x 50 0.45 Packing Specification CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved

The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. Big Chip LEDs™ is a registered trademark of Luminus Devices, Inc., all rights reserved. This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries. Rev Date Description of Change 01 05/09/2021 Initial release to production CBM-40-SB Product Datasheet PDS-003061 Rev 01 © 2021 Luminus Devices, Inc. - All Rights Reserved