CBM-120

CBM-120 LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Far Red Chip On Board LEDs PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Applications:

• Inspection
• Machine Vision
• Fiber-coupled illumination
• Medical and Scientific Instrumentation Features:
• Mosaic Array Far Red LED chipset with surface emitting area of 12 mm2, 4:3 aspect ratio
• Vertical chip LED technology for high power density and uniform emission
• High thermal conductivity copper coreboard package
• Can be operated at variable drive currents up to 18A CBM-120-FR Product Datasheet Table of Contents Optical & Electrical Mechanical Dimensions .... 9 Packaging Information ... 10

Luminus LEDs benefit from innovations in device technology, chip packaging and thermal management. This suite of technologies give engineers and system designers the freedom to develop solutions both high in power and efficiency. PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved Luminus Mosaic Array LED Technology Luminus’ Devices vertical chip technology enables LED chips with uniform brightness over the entire chip surface. The optical power and brightness produced by these densely packed arrays of devices enable solutions not possible with single chip packages that be used to replace arc and halogen lamps. Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to board of 0.64 ºC/W, Luminus CBM-120 LEDs have the lowest thermal resistance of any packaged LED on the market. This will allow the LEDs to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. Reliability With designs based on years of chip and packaging development experience, Luminus LEDs are one of the most reliable light sources in the world today. Luminus LEDs pass a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All LED products manufactured by Luminus are RoHS and Halogen compliant and free of hazardous materials, including lead and mercury. Understanding Mosaic Array LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’ products. Testing Temperature Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This method of measurement ensures that Luminus LEDs perform in the field just as they are specified. Multiple Operating Points The tables on the following pages provide typical optical and electrical characteristics for the standard drive conditions. Since the LEDs can be operated over a wide range of drive conditions and duty cycles from <1% to 100% there are many other potential values attainable. Driving devices beyond recommended driving conditions shortens lifetime. 1145 Sonora Ct. • Sunnyvale, CA 94086 CBM-120-FR Product Datasheet

PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 CBM-120-FR Product Datasheet CBM-120-FR Binning Structure All CBM-120-FR LEDs are tested for radiometric power / peak wavelength and placed into one of the following flux / wavelength bins. Color Radiometric Power Bin (FF) Min Radiometric Power (Watts) @ 9A Max Radiometric Power (Watts) @ 9A Far Red (Radiometric Power) RA 4.6 5.8 RB 5.8 7.0 RC 7.0 8.2 Note: Luminus maintains a +/-6% tolerance in Flux measurements. Color Peak Wavelength Bin Min Peak Wavelength @ 9A Max Peak Wavelength @ 9A Far Red (Peak Wavelength) P720 720 725 P725 725 730 P730 730 735 P735 735 740 Note: Luminus maintains a +/-1nm tolerance in Peak Wavelength measurements.

Ordering Information

PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved Products Ordering Part Number Description CBM-120-FR CBM-120-FR-C15-FF### CBM-120 Mosaic Array chipset consisting of 12x1mm2 Far Red LEDs, a thermistor, connectors, and a square copper-core PCB. 1145 Sonora Ct. • Sunnyvale, CA 94086 CBM-120-FR Product Datasheet CBM-120-FR Orderable Bin Kits Note 1: A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. Individual flux bins are not orderable. Note 2: Flux Bin listed is minimum bin shipped - higher bins may be included at Luminus’ discretion Part Number Nomenclature Product Family Chip Area Color Package Configuration Bin Kit 1,2 CBM: Copper- core PCB, Multi Chip Array, No Encapsulation 120: 12 mm2 FR= Far Red C15: 28 mm x 26.75 mm - Common Anode Package See Mechanical Drawing section See page 3 for complete bin definition table Color Radiometric Power Peak Wavelength Bins Kit Number Min. Flux Bin Min Power Max Power Far Red RA 4.6W 8.2W P730, P735 RA100 P720, P725, P730, P735 RA200

Reference Optical & Electrical Characteristics (Ths = 40°C) PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved FAR RED Parameter Symbol Values 1 Unit Drive Conditions 2 I 9 A Peak Wavelength Typ. λp 730 nm Current Density j 0.75 A/mm2 Forward Voltage VF min 2.0 V VF 2.2 V VF max 2.8 V Radiometric Flux Φtyp 6.3 W FWHM- Spectral bandwidth at 50% of Φv 3 32 nm Parameter Symbol Values Unit Absolute Minimum Current (CW or Pulsed) 3 0.2 A Absolute Maximum Current (CW) 4 18.0 A Maximum Junction Temperature 5 Tjmax 110 °C Storage Temperature Range -40 to +100 °C Emitting Area Dimensions 4.4 × 3.3 mm × mm Note 1: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 9 A. Note 2: Listed drive conditions are typical for common applications. CBM120-FR devices can be driven at currents ranging from 200 mA to 18 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Note 3: Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information. Note 4: CBM-120-FR LEDs are designed for operation to an absolute maximum current as specified above. Sustained operation at or beyond absolute maximum currents will result in a reduction of device life time compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. In pulsed operation, rise time from 10-90% of forward current should be longer than 0.5 μseconds. Note 5: Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. 1145 Sonora Ct. • Sunnyvale, CA 94086 CBM-120-FR Product Datasheet

PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved Optical & Electrical Characteristics 1145 Sonora Ct. • Sunnyvale, CA 94086 Relative Radiometric Power vs Forward Current Relative Radiometric Power vs Heat Sink Temp. Relative Peak Wavelength vs Forward Current Relative Peak Wavelength vs Heat Sink Temp. Relative Forward Voltage vs Forward Current Relative Forward Voltage vs Heat Sink Temp. CBM-120-FR Product Datasheet 25% 50% 75% 100% 125% 150% 175% 200% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Relative Radiometric Power (%) If (A) -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 0.25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Δ Peak Wavelength (λp) If (A) -0.60 -0.50 -0.40 -0.30 -0.20 -0.10 0.00 0.10 0.20 0.30 0.40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Δ Forward Voltage (Vf) If (A) 94% 95% 96% 97% 98% 99% 100% 101% 102% 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Relative Radiometric Power (%) Ths (°C) -3.00 -2.00 -1.00 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Δ Peak Wavelength (λp) Ths (°C) -0.18 -0.15 -0.12 -0.09 -0.06 -0.03 0.00 0.03 0.06 0.09 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Δ Forward Voltage (Vf) Ths (°C)

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 620 640 660 680 700 720 740 760 780 800 820 Intensity (a.u.) Wavelength (nm) PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved CBM-120-FR Product Datasheet 1145 Sonora Ct. • Sunnyvale, CA 94086 Typical Spectrum

PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 Thermal Resistance CBM-120 Typical Thermal Resistance 6 Rθj-b 7 0.64 °C/W Rθb-hs 8 0.12 °C/W Rθj-hs 8 0.76 °C/W Rθj-ref 7 0.67 °C/W Note 6: Real thermal resistance data - “Electrical” thermal resistance values available upon request Note 7: Thermal resistance values are based on engineering modeled data. Note 8: Thermal Resistance is based on eGraf 1205 Thermal interface. Tj = Die Junction Temp Tb = Coreboard Temp Ths = Heatsink Temp (3mm from surface) Tref - Thermistor Temp CBM-120-FR Product Datasheet The thermistor used in CBT-120 devices mounted on coreboards is from Murata Manufacturing Co. The global part number is NCP18XH103J03RB. Please see http://www.murata.com/ for details on calculating thermistor temperature. For more information on use of the thermistor, please contact Luminus directly. Electrical Pinout 100 125 0 5 10 15 20 Temperature ( ° C) Resistance (K ohm)

PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions – CBM-120 Mosaic Array LED Emitter Recommended connector for Anode and Cathode: Panduit Disco Lok™ Series P/N: DNF14-250FIB-C or JST Manufacturing Co: SPS-61T-250 for AWG 16 to 14. Panduit Disco Lok™ Series P/N: DNF10-250FIB-L or JST Manufacturing Co: SPS-91T-250 for AWG 12 to 10. (Check NEC standards for ampacity of the power cable being used.) Thermistor Connector: GCT P/N WTB08-021S-F. Recommended Female: MOLEX P/N 51146-0200 (Not recommended for new designs), GCT P/N WTB06-020H-A or equivalent. 1145 Sonora Ct. • Sunnyvale, CA 94086 CBM-120-FR Product Datasheet

41.40 PITCH SECTION A-A TYP0.76 TYP 19.81 TOP TRAY SHOWN TRANSPARENT FOR REFERENCE ONLY 6.35 127 254 266.70 139.70 51.05 203.71 57.15 AA DIMENSIONS IN MILLIMETERS 1145 Sonora Ct. • Sunnyvale, CA 94086 Shipping Tray Outline CBM-120-FR Product Datasheet PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved

1145 Sonora Ct. • Sunnyvale, CA 94086 Shipping Box Shipping Box Quantity Material Dimensions (L x W x H, mm) Carton Box 1 -20 packs (50 - 1000 Devices) S4651 560 x 560 x 200 Packing and Shipping Specification (CBM-120) Sample label –for illustration only Label Fields (subject to change):

• 6-8 digit Box number (for Luminus internal use)
• Luminus ordering part number
• Quantity of devices in pack
• Part number revision (for Luminus internal use)
• Customer’s part number (optional)
• Bin (FF-WW) as defined page 3
• 2D Bar code Product Label Specification Packing Configuration Qty /Pack Reel Dimensions (diameter x W, mm) Gross Weight (kg) Stack of 5 trays with 10 devices per tray Each pack is enclosed in ESD bag 50 150 x 280 x 85 2.7 Packing Specification PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved CBM-120-FR Product Datasheet

The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries. PDS-002546 Rev 03 © 2020 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct. • Sunnyvale, CA 94086 History of Changes Rev Description of Change A 08/03/2015 Initial Release - Preliminary Specifications for 740nm Parts B 01/29/2016 Updated Mechanical Drawing, Typical Parametric Values, Packaging Specifications, Ordering Information 01 03/25/2016 Updated Thermal Resistance Drawing, Updated Binning 02 09/09/2016 Updated Mechanical Drawing and Corrected Typos 03 02/26/2020 Updated: - Rth junction to board value on page 2 - Binning Structures on page 3 (added P720 & P725) - Typical Performances on page 5 - Optical & Electrical Characteristics on page 6 - Mechanical Drawing on page 9 including connector information CBM-120-FR Product Datasheet