CB1 JAE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
IEC60169-29(Type 0.1/2.3) Standard Compatible Coaxial Connector Compact coaxial connector compatible to IEC60169-29(Type 0.1/2.3) standard Receptacle side angel type suitable for narrow-pitch multiple mounting because of small size --7mm x 7mm for occupied PCB dimension and 4.1mm dia. outer dimension at mating portion Low profile receptacle, 7.2mm height from PCB Screw lock mating is possible and the size is equivalent to Type SMB(IEC60169-10) Floating in axial direction with approximately 3mm mating stroke (effective length) Three types of lock mechanism is standardized for cable side, which are intermatable with this receptacle. -Screw type: outer diameter 6.5 mm max. extremely compact as a screw type -Snap-on, Push-Pull type: compatible to friction lock and complete lock - Slide in type: compatible to rack and panel type mating (without lock) 50 ohm and 75 ohm are standardized. Applicable frequency are as below 50 ohm: DC to 10GHz, 75 ohm: DC to 2GHz High environmental durability with surface finishes in gold plating Compliant to RoHS directive The CB1 series are compact coaxial connectors compatible to IEC60169-29(type 1.0/2.3) standard for wireless communication devices and various radio frequency wave devices such as mobile phones, PHSs, wireless LAN base stations, access points, etc. CB1 series are space saving and are suitable for multiple use on devices as an I/O connector. Existing Lineup Receptacle(board side): Angle Bulk type(75 ohm type) Mass production under study Receptacle(board side): Angle type (75, 50 ohm type), Multiple pos. (multiple pin) type Plug(cable side): Straight type, Angle type Plug side mating style: Screw type, Snap on push pull type Items and cables that are not in the above are under consideration. Please contact us. Mobile phone base stations, PHS base stations, wireless LAN Access points, wireless communication devices, broadcasting devices, measuring devices, RFID(IC tag, automatic recognition) high frequency module, wireless power amplifiers, etc.
Applications
Board side receptacle Cable side plug (mass production under study) RoHS Compliant
2/3JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. Characteristic Impedance: 75 ohm Applicable frequency: DC to 2GHz Insertion loss 0.3dB (DC to 1GHz) Rated current: DC0.5A Rated voltage: AC250Vr.m.s. Operating temperature: -40 deg. C to +85 deg. C Contact resistance: Signal contact; 4m ohm max. (after test: 10m ohm max.) Grand contact; 2.5m ohm max. (after test: 7.5m ohm max.) Dielectric withstanding voltage: AC750Vr.m.s, per minute Insulation resistance: 1000M ohm min.(DC500V) Materials/ Finishes
Ordering Information
Receptacle(board side) CB1 S *** C 00 Series Characteristic impedance C; 75 ohm Terminal connection type 00; Board connection type Modify No. Connector shape S: Right angle receptacle Please contact us concerning item other than the following. Cable products are available in other various, connector types and cable types. Please consult us. General Specifications Technical Information Part Number CB1S001C00 CB1S002C00 Componets Materials/ Finishes Materials/ Finishes Insulator Ethlene tetrafloride Ethlene tetrafloride Single contact (inner conductor) Copper alloy/ Au plating over Ni (0.5 um max.) Copper alloy/ Au plating over Ni (0.5 um max.) Earth contact （outer conductor） Copper alloy/ Au plating over Ni (0.3 um max.) Contact area: Copper alloy/ Au plating over Ni (0.3 um max.) Terminal area: Copper alloy/ Ni plating Nut - Copper alloy/ Ni plating Zo Pa rt Numbe r SJ Drawing Specifications Note CB1S001C00 SJ102929 Right angle type- mass production under study CB1S002C00 SJ106901 Right angle bulk type-started mass production 50 ohm Cable side plug connector and Harness assembly Receptacle connector Mass production(under study) Mass production(under study) 75 ohm JACS-20052
3/3JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), AV devices, household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. Applicable through hole dimensions Dimensions and Shape <CB1S001C00> -Mass production under study- <CB1S002C00> -Started mass production- Applicable through hole dimensions panel Panel thickness