CAR DIWELL | Alldatasheet
Document overview
- Manufacturer or author: sunny
- PDF pages: 5
Technical content
DANUBE http://www.danube.com.tw 2011/08/23 15-1
FEATURES
DUAL IN LINE PACKAGE UP TO 2W REGULATED OUTPUT POWER 100% BURNED IN HIGH EFFICIENCY FIVE-SIDED SHIELD TO REDUCE EMI LOW COST NO EXTERNAL COMPONENTS REQUIRED UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE 3 YEARS WARRANTY OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Voltage Setpoint Accuracy +/-3% max Input Voltage Range +/-10% max Temperature Coefficient +/-0.05%/OC Input Filter Pi Network Ripple & Noise(20MHz BW) 100mVp-p max Protection Fuse Recommended Line Regulation +/-1% max Load Regulation +/-1% max GENERAL SPECIFICATIONS Minimum Load 10% of Full Load Efficiency 58% min Short Circuit Protection Current Limit Protection Isolation Voltage
1500 VDC min
Short Circuit Restart Automatic Isolation Resistance 10 ohms min Transient Response 200uS max Isolation Capacitance 80pF max Switching Frequency 50KHz min MTBF >850,000 Hours ENVIRONMENTAL SPECIFICATIONS Weight 12.0g-14.4g Operating Temperature -25 OC to +71 O C Case Mate rial Storage Temperature -55 OC to +125 OC Non-Conductive Plastic Or Five-Sided Shield Case Humidity 95% max Case Size 31.8mm*20.3mm*10.2mm Cooling Free-Air Convection Conducted Emissions EN55022 Class A Radiated Emissions EN55022 Class A ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25 OC UNLESS OTHERWISE NOTED. High Line to Low Line. Load Regulation is for output load current change from 10% to 100%. For 10 seconds. 25% Step Load Change. MIL -HDBK-217F @25 OC , Ground Benign. CAR SERIES 2W REGULATED
DANUBE http://www.danube.com.tw 2011/08/23 15-2 SELECTION GUIDE 2W OUTPUT INPUT7 CURRENT(mA) MODEL NUMBER6 INPUT VOLTAGE (VDC) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (mA) FULL LOAD NO LOAD EFF (%)8 ISOLATION (VDC) CARS-0505(M) 4.5-5.5 5 400 727 64 55 1500 CARS-0509(M) 4.5-5.5 9 222 635 50 63 1500 CARS-0512(M) 4.5-5.5 12 167 615 50 65 1500 CARS-0515(M) 4.5-5.5 15 133 625 50 64 1500 CARS-1205(M) 10.8-13.2 5 400 273 20 61 1500 CARS-1209(M) 10.8-13.2 9 222 265 20 63 1500 CARS-1212(M) 10.8-13.2 12 167 252 20 66 1500 CARS-1215(M) 10.8-13.2 15 133 242 20 69 1500 CARD-1205(M) 10.8-13.2 +/-5 +/-200 273 20 61 1500 CARD-1212(M) 10.8-13.2 +/-12 +/-84 270 40 62 1500 CARD-1215(M) 10.8-13.2 +/-15 +/-67 257 38 65 1500 CARS-2405(M) 21.6-26.4 5 400 132 13 63 1500 CARS-2409(M) 21.6-26.4 9 222 126 20 66 1500 CARS-2412(M) 21.6-26.4 12 167 121 13 69 1500 CARS-2415(M) 21.6-26.4 15 133 121 13 69 1500 CARD-2405(M) 21.6-26.4 +/-5 +/-200 132 13 63 1500 CARD-2412(M) 21.6-26.4 +/-12 +/-84 129 16 65 1500 CARD-2415(M) 21.6-26.4 +/-15 +/-67 132 16 63 1500 CARS-2805(M) 25.2-30.8 5 400 114 13 63 1500 CARS-4805(M) 43.2-52.8 5 400 66 8 63 1500 CARS-4809(M) 43.2-52.8 9 222 63 8 66 1500 CARS-4812(M) 43.2-52.8 12 167 60 8 69 1500 CARS-4815(M) 43.2-52.8 15 133 60 8 69 1500 Note: Other input to output voltages may be available. Please contact factory. NOMINAL INPUT VOLTAGE. NOMINAL INPUT VOLTAGE, FULL LOAD.
DANUBE http://www.danube.com.tw 2011/08/23 15-3 SIMPLIFIED SCHEMATIC SINGLE OUTPUT DUAL OUTPUT -Vin +Vout+Vin OSCILLATOR DRIVER -Vout REGULATOR -Vin +Vout -Vout REGULATOR OSCILLATOR DRIVER +Vin REGULATOR Com. MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PIN SINGLE DUAL 1 & 24 +Vin +Vin 2 & 23 NC -Vout 3 & 22 NC Common 10 & 15 -Vout Common 11 & 14 +Vout +Vout 12 & 13 -Vin -Vin 13 12 BOTTOM VIEW SIDE VIEW All dimensions are in mm[inches] 20.3[0.80] 31.8[1.25] 10.2[0.40] 15.24[0.60] 2.06[0.08] 3.81[0.15] 2.54[0.10] 2.54mm 2 3 1011 1514 TOP VIEW 2223 2.54m m TYPICAL APPLICATIONS SINGLE OUTPUT DUAL OUTPUT LOAD INPUT +Vin OUTPUT -Vout +Vout -Vin DC-DC CONVERTER +Vout -Vin -Vout INPUT DC-DC CONVERTER +Vin LOAD1 OUTPUT Common LOAD2
DANUBE http://www.danube.com.tw 2011/08/23 15-4 TYPICAL PERFORMANCE CURVES Specifications typical at ta=25 OC,nominal input voltage , rated output current unless otherwise specified. OUTPUT LOAD VS EFFICIENCY OUTPUT LOAD VS OUTPUT VOLTAGE 20% 40% 60% 80% OUTPUT LOAD(%) EFFICIENCY(%) -10% -5% 10% OUTPUT LOAD(%) OUTPUT VOLTAGE CHANGE(%) TEMPERATURE DERATING INPUT VOLTAGE VS EFFICIENCY 25% 50% 75% 100% 125% -25 0 25 50 70 100 TA(degree C) OUTPUT POWER(%) 20% 40% 60% 80% 100% -10 -5 Nom 5 10 INPUT VOLTAGE(%) EFFICIENCY(%) INPUT FUSE SELECTION GUIDE 4.5-5.5V INPUT VOLTAGE(VDC) 10.8-13.2V INPUT VOLTAGE(VDC) 21.6-30.8V INPUT VOLTAGE(VDC) 43.2-52.8V INPUT VOLTAGE(VDC) 1200mA Slow-Blow Type 400mA Slow-Blow Type 250mA Slow-Blow Type 100mA Slow-Blow Type DC-DC CONVERTER +Vin -Vin +Vout -Vout OUTPUT Fuse INPUT Note: Certain applications may require the installation of external fuse in front of the input. SAFE OPERATING AREA
DANUBE http://www.danube.com.tw 2011/08/23 15-5 CAR SERIES APPLICATION NOTES: EXTERNAL CAPACITANCE REQUIREMENTS: No external capacitance is required for operation of the CAR series. To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm from DC to 100KHz is required. External output capacitance is not required for operation, however it is recommended that 10uF tantalum and 0.1uF ceramic capacitance be selected for reduced system noise. Additional output capacitance may be added for increased filtering, but should not exceed 220uF. We Can Offer EMC-Filter According To EN55011/22 Class B. Negative Outputs: A negative output voltage may be obtained by connecting the +OUT to circuit ground and connecting –OUT as the negative output. FOR MORE INFORMATION CALL: Danube Enterprise Co., Ltd. Tel: 886-7-3755165 Fax: 886-7-3755330 E-mail: danube@ms10.hinet.net Home Page http://www.danube.com.tw