CA5S33-25 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

WWW.WALLINDUSTRIES.COM1 603 778 2300

25 TO 40 WATTS - CA SERIES

Ultra Wide Input Voltage Range, Low Profile

FEATURES

  • Ultra-Wide Input Voltage Range (4:1)
  • LC Input Filter for Low Reflected Ripple Current
  • Regulated Outputs
  • Thermal Shutdown with Auto-Recovery
  • Current Limiting Short Circuit Protection
  • 500VDC min. I/O Isolation
  • Industry Standard Package and Pin-Out
  • Industrial temperature grade also available THE CA SERIES FROM WALL INDUSTRIES The CA Series of single, dual and triple output DC/DC con- verters performs over an ultra-wide input voltage range (4:1), providing indefinite short circuit and overvoltage protection. Without a heatsink, the CA Series’ design technology allows for up to 40 watts output power from a 3.0 x 3.0 x 0.40” case. These current mode control forward converters are designed for improved transient response and reduced stress on switching components. SPECIFICATIONS: CA SERIES All specifications apply @ +25 C ambient unless otherwise noted. INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS PHYSICAL SPECIFICATIONS Due to advances in technology, specifications subject to change without notice. 11/29/01

25 TO 40 WATTS CA SERIES

2WWW.WALLINDUSTRIES.COM 603 778 2300 Input Output Output Over Voltage Model Voltage Voltage Current Set-Point Number (VDC) (VDC) (Amps) (VDC) 5 5.0 6.2 CA5S5-25 12 2.0 15 CA5S12-25 15 1.6 18 CA5S15-25 18 1.38 21 CA5S18-25 ±5 2.5 6.2 CA5D5-25 ±12 1.04 15 CA5D12-25 ±15 .83 18 CA5D15-25 9-36 3.3 7.58 5.1 CA24S3.3-25 5 5.0 6.2 CA24S5-25 8.0 6.2 CA24S5-40 12 2.0 15 CA24S12-25 3.3 15 CA24S12-40 15 1.6 18 CA24S15-25 2.66 18 CA24S15-40 18 1.38 21 CA24S18-25 2.22 21 CA24S18-40 ±12 1.25 15 CA24D12-30 1.66 15 CA24D12-40 ±15 1.0 18 CA24D15-30 1.33 18 CA24D15-40 18-75 3.3 7.58 5.1 CA48S3.3-25 5 5.0 6.2 CA48S5-25 8.0 6.2 CA48S5-40 12 2.0 15 CA48S12-25 3.3 15 CA48S12-40 15 1.6 18 CA48S15-25 2.66 18 CA48S15-40 18 1.38 21 CA48S18-25 2.22 21 CA48S18-40 ±12 1.25 15 CA48D12-30 1.66 15 CA48D12-40 ±15 1.0 18 CA48D15-30 1.33 18 CA48D15-40 55-110 3.3 7.58 5.1 CA74S3.3-25 5 5.0 6.2 CA74S5-25 8.0 6.2 CA74S5-40 12 2.0 15 CA74S12-25 3.3 15 CA74S12-40 15 1.6 18 CA74S15-25 2.66 18 CA74S15-40 18 1.38 21 CA74S18-25 2.22 21 CA74S18-40 ±12 1.25 15 CA74D12-30 1.66 15 CA74D12-40 ±15 1.0 18 CA74D15-30 1.33 18 CA74D15-40 PIN CONNECTIONS Singles Duals Triples Alternate Pin-Out A

1 Remote Remote Remote

2 Case Case Case

5 No pin No pin No pin No pin

6 N/C -Vout Aux. -Vout 7 N/C Common Aux. +Vout

8 Common Common Common

10 Trim Trim Trim

NOTES: 1. All case and pin to case dimensions reference only unless otherwise noted. 3. Pin to pin tolerance ±0.01”. Pin dimension tolerance ±0.005” 4. Duals: 25 - 100% load: ±1% and 0-100% load: ±5%. Triples: 10% min load required on primary output, ±1%. 5. Significant capacitive load may inhibit start-up and opera- tion, consult factory. 6. For Industrial Temp add suffix “I”. 11/29/01

25 TO 40 WATTSCA SERIES

WWW.WALLINDUSTRIES.COM3 603 778 2300 11/29/01