CA14506 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
Product Number CA14506_G2-LXP2-RS2 Family Leila Type Assembly Color black Diameter 21,8 mm Height 14,7 mm Style round Optic Material PMMA Holder Material Fastening tape Status production ready ROHS Comliant Yes Date Updated 22/01/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-E 7.0 deg RS2-class 88 % 34.650 - XP-L 14 deg RS2-class 88 % 9.500 - XP-E2 sim: 10 RS2-class sim: 94 %sim: 24.600 - XP-L HI 8 deg RS2-class 89 % 20.100 - XP-G2 sim: 10 RS2-class sim: 93 %sim: 22.400 - XT-E sim: 9,5 RS2-class sim: 92 %sim: 19.900 - H35C1 (LEMWA33) sim: 10 RS2-class sim: 92 %sim: 19.400 - NVSxx19B/NVSxx19C sim: 11 RS2-class sim: 88 %sim: 15.000 - LH351B sim: 10 RS2-class sim: 91 %sim: 17.200 - LH351A(3535) sim: 9 RS2-class sim: 91 %sim: 21.600 - Z5P sim: 8 RS2-class sim: 92 %sim: 26.500 - Z5M1/Z5M2 sim: 10 RS2-class sim: 93 %sim: 20.500 - June 16th 2017 3:43 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10
24240 SALO, Finland
http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001
25% 50% 75% 100% -30-25-20-15-10-5051015202530 Relative intensity of CA14506_G2-LXP2-RS2_(XP-E)
B C A D Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L SCALE 2:1 WEIGHT 4,0 g SHEET 1/1 SIZE DRAWING TITLE LEILA-G2-LXP2 PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. INDEX PART NO DESCRIPTION MATERIAL COLOUR
1 C14444 LXP2-LT-HLD PC black
2 - LXP2-series_mech lens PMMA clear Applies to: CA14504 CA14506 CA14508 CA14510 CA14512 21.8 Top view Bottom view O-90 beam direction 14.67 1.15 PU foam tape 0.4mmFront view Isometric view
NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.