CA13752 CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 23

Technical content

Product Number CA13752_STRADA-SQ-FT Family Strada Type Assembly Color clear Diameter 25 + 25 mm Height 12,7 mm Style square Optic Material Holder Material Fastening pin, screw, tape Status production ready ROHS Comliant Yes Date Updated 22/09/2014 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector MK-R Asymmetric degAsymmetric 89 % 0.600 - MX-3 sim: AsymmetricAsymmetric sim: 90 %- - MX-6 sim: AsymmetricAsymmetric sim: 90 %- - XM-L Asymmetric degAsymmetric 90 % 0.700 - XP-L Asymmetric degAsymmetric 91 % 0.700 - XM-L2 sim: AsymmetricAsymmetric sim: 90 %- - XHP50 Asymmetric degAsymmetric 90 % 0.610 - XP-G2 sim: AsymmetricAsymmetric sim: 89 %- - XP-L2 Asymmetric degAsymmetric 90 % 0.660 - LUXEON M/MX Asymmetric degAsymmetric 88 % 0.620 - LUXEON MZ asymmetric degAsymmetric 90 % 0.710 - LUXEON XR-M linear 1x3, 1x4, 1x5 Asymmetric degAsymmetric 92 % 0.650 - Duris S10 Asymmetric degAsymmetric 89 % 0.610 - Duris P10 sim: AsymmetricAsymmetric sim: 89 %sim: 0.790 - June 5th 2017 8:13 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10

24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

B C A D Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE 1:1 WEIGHT SHEET 1/1 SIZE DRAWING TITLE CA13752_STRADA-SQ-FT PART NUMBER CA13752 Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." INDEX PART NO DESCRIPTION MATERIAL COLOUR

1 CA13752 STRADA-SQ-FT PMMA / PU double sided tape

  • g 12.7 0.9 Front view 2pos pins 21.5 Bottom view 3.2 Top view pin hole 21.5 3.2 screw hole 25.4 PCB suggestion Led location in part center. Isometric view

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.