CA13058 CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 27

Technical content

Product Number CA13058_FLARE-MINI-AD-PIN Family Flare Type Assembly Color black Diameter 16 mm Height 9,1 mm Style round Optic Material PMMA Holder Material Fastening pin, tape Status production ready ROHS Comliant Yes Date Updated 5/10/2015 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XB-D 100+16 deg Oval 93 % 1.200 - XP-G 100+20 deg Oval 94 % 1.100 - XT-E 104+19 deg Oval 94 % 1.100 - XP-E2 90+16 deg Oval 94 % 1.400 - XP-G2 95+21 deg Oval 94 % 1.100 - XP-L 108+27 deg Oval 92 % 0.780 - XP-L2 102+29 deg Oval 94 % 0.770 - H35C1 (LEMWA33) 100+20 deg Oval 93 % 1.100 - LUXEON A 92+20 deg Oval 94 % 1.100 - LUXEON C sim: 13+86 Oval sim: 93 %sim: 1.570 - NVSxx19A 100+20 deg Oval 94 % 1.100 - Oslon Square EC 92+21 deg Oval 94 % 1.100 - Fortimo FastFlex LED board 2x8/757 DS G396+21 deg Oval 93 % 1.100 - LH351Z 99+24 deg Oval 94 % 1.100 - Z5M1/Z5M2 99+22 deg Oval 94 % - - June 7th 2017 4:32 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10

24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

25% 50% 75% 100% -90-80-70-60-50-40-30-20-100102030405060708090 Relative intensity of CA13057&CA13058_FLARE-MINI-AD-XBD

25% 50% 75% 100% -70-60-50-40-30-20-10010203040506070 Relative intensity of CA13057&CA13058_FLARE-MINI-AD-XPG

25% 50% 75% 100% -90-80-70-60-50-40-30-20-100102030405060708090 Relative intensity of CA13057&CA13058_FLARE-MINI-AD-XTE

25% 50% 75% 100% -70-60-50-40-30-20-10010203040506070 Relative intensity of CA13057&CA13058_FLARE-MINI-AD-LuxA

25% 50% 75% 100% -70-60-50-40-30-20-10010203040506070 Relative intensity of CA13057&CA13058_FLARE-MINI-AD-NVS19

25% 50% 75% 100% -70-60-50-40-30-20-10010203040506070 Relative intensity of CA13057&CA13058_FLARE-MINI-AD-SQEC

B C A D DESIGNED BY DATE CHECKED BY DATE DRAWN BY DATE This drawing is our property. It can't be reproduced or communicated without our written agreement. SCALE 2:1 SHEET 1/1 SIZE DRAWING NUMBER REV DRAWING TITLE Material: Lens: PMMA Tape: PU Foam Tolerances for dimensions: 0-20mm tolerance value +-0.1mm 21-45mm tolerance value +-0.2mm 46-90mm tolerance value +-0.3mm 91-100mm tolerance value +-0.4mm 101-mm tolerance value +-0.5mm Note: Must use external positioning over light source. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland Datasheet Flare-Mini-AD-PIN Assy CA13058 pl 27.02.2012 WEIGHT 1,25 G jk 20151005 Tape 0.4mm 9.1 0.8 Beam direction Led center point 8.6 9.2

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.