CA12064 CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 22

Technical content

Product Number CA12064_EMILY-M Family Emily Type Assembly Color clear Diameter 26 mm Height 15 mm Style round Optic Material PMMA Holder Material Fastening tape, pin Status production ready ROHS Comliant Yes Date Updated 9/06/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XM-L 18 deg Medium 93 % - - XM-L HVW sim: 19 Medium 90 % - - XT-E 17 deg Medium - 6.940 - XP-G2 18 deg Medium 90 % 10.100 - XP-E2 17 deg Medium 87 % 9.200 - XM-L2 18 deg Medium 90 % 7.900 - XP-L HI 17 deg Medium 88 % 9.000 - LUXEON Rebel ES 18 deg Medium 90 % - - LUXEON A 18 deg Medium 90 % - - NS9x383 18 deg Medium 90 % 6.100 - Oslon Black Flat sim: 17 Medium sim: 94 %sim: 10.000 - Oslon Black sim: 15 Medium sim: 94 %sim: 10.900 - LH351B 17 deg Medium 88 % 8.700 - LH351Z 18 deg Medium 89 % 9.400 - Z8Y22P 17 deg Medium 94 % 7.000 - June 13th 2017 7:47 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10

24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

25% 50% 75% 100% -30-25-20-15-10-5051015202530 Relative intensity of CA12064_EMILY-M-(XPG2)

B C A D Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L SCALE 2:1 WEIGHT SHEET 1/1 SIZE DRAWING TITLE PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Datasheet Emily-RE-ES series lens Material: Lens: PMMA Tape: PU Foam with adhesive Part no.s: CA12062_Emily-SS CA12064_Emily-M CA12066_Emily-O CA12068_Emily-O-90 CA12070_Emily-M2 0.7 Front view Tape 0.4mm Top view 8.6 c/c Bottom view Beam direction Emily-O-90 Beam direction Emily-O

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.