CA10 VAISALA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • Connects up to 32 CWL100 wireless data loggers to Vaisala Jade Smart Cloud
  • Display shows connection status of data loggers and cloud service
  • Long range LoRa ™ radio with over 100 m (328 ft) typical indoor range
  • End-to-end encryption ensures secure data transmission and storage
  • Powered by Power over Ethernet (PoE) or DC adapter
  • Requires Internet connection through cabled Ethernet network or cellular modem Cloud Access Point CA10 is a wireless networking hardware device for connecting CWL100 data loggers to Vaisala Jade Smart Cloud service. CA10 and Jade Smart Cloud CA10 access point transfers measurement data from wireless CWL100 data loggers to Jade Smart Cloud service, and enables management of the data loggers from the cloud interface. Data is encrypted during transfers to protect against eavesdropping, data tampering, and transfer errors. CA10 access points and CWL100 data loggers are associated with a specific cloud account when they are purchased, so there is no need for the user to do any device pairing. CA10 always requires power and Internet connection for operation. Redundancy Redundancy of the wireless connection is achieved through use of multiple access points and free connection capacity in the system. If a data logger has a connection problem, it will automatically connect to another available nearby access point in the system. At least two access points with free capacity are needed for failover to function. In case of temporary network disruptions, the CWL100 data loggers can record up to 30 days of measurements. Recorded data can be downloaded directly from the data logger through the USB port. Time synchronization CA10 requires accurate time to operate its LoRa wireless connection, and to maintain correct time on the connected data loggers. To achieve the accurate time, CA10 automatically synchronizes with Network Time Protocol (NTP) servers over the Internet.

Networking standards LoRa™ Wireless connection capacity Up to 32 supported devices Modulation LoRa chirp spread spectrum modulation Output power 13 dBm (20 mW) Antenna Non-removable external antenna Typical range (indoors) At least 100 m (approx. 330 ft) Maximum number of access points in an area Frequency bands Model CA10E 868 MHz Model CA10A 915 MHz General Compatible host systems Vaisala Jade Smart Cloud Supported devices CWL100 data logger Display language English Internal clock Synchronizes with Network Time Protocol (NTP) servers over the Internet Requirements for connectivity Cabled Ethernet network with Internet connection (can be provided using a cellular modem) Network provides IP address through DHCP CA10 must be able to access TCP port 443 and UDP port 123 Inputs and outputs Operating voltage using dedicated power supply connector 10 … 30 V DC PoE power class Class 0 Power consumption Max. 13 W Ethernet interface Supported standards 10BASE-T, 100BASE-TX IPv4 address assignment DHCP (automatic) Connectors Power supply connector 2.0 mm center pin locking type DC power jack Service port Micro-USB (2.0) Expansion port USB type A (2.0) Ethernet 8P8C (RJ-45) Operating environment Operating environment Indoor use IP rating IP30 Operating temperature −20 … +60 °C (−4 … +140 °F) Operating humidity 0 … 90 %RH, non-condensing Storage temperature −20 … +60 °C (−4 … +140 °F) Compliance Electromagnetic compatibility (EMC) IEC/EN 61326‑ 1, industrial environment Electrical safety IEC/EN 61010‑ 1 CA10E model EU directives and regulations RoHS Directive (2011/65/EU) amended by 2015/863 Radio Equipment Directive, RED (2014/53/EU) Radio standards and approvals ETSI EN 300 220-2 ETSI EN 301 489-1 ICASA No: TA-2022/0596 IMDA No: DB105576 Serbia: И005 21 Compliance marks AAA, CE, ICASA, UKCA CA10A model Radio standards and approvals Anatel ID: 04763-19-12322 AS/NZS 4268 FCC ID: 2AO39-AP10A IC ID: 23830-AP10A Compliance marks ANATEL, RCM Mechanical specifications Housing color White Mounting methods Screws, tie wrap Weight 386 g (13.6 oz) Dimensions (H × W × D) 311 × 133 × 37 mm Materials Housing PC/ABS blend Display window Chemically strengthened glass Antenna ABS 116 [4.57] 311 [12.24] 124 [4.88] Ø3.5 [0.14] mm [in] CA10 access point dimensions Published by Vaisala | B211911EN-D © Vaisala 2023 All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners. Any reproduction, transfer, distribution or storage of information contained in this document is strictly prohibited. All specifications — technical included — are subject to change without notice. www.vaisala.com