C6D06065A CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • New 6th Generation Technology
  • Low Forward Voltage Drop (VF)
  • Zero Reverse Recovery Current
  • Zero Forward Recovery Voltage
  • Low Leakage Current (Ir)
  • Temperature-Independent Switching Behavior
  • Positive Temperature Coefficient on VF Benefits
  • Higher System Level Efficiency
  • Increase System Power Density
  • Reduction of Heat Sink Requirements
  • Parallel Devices Without Thermal Runaway

Applications

  • Switch Mode Power Supplies (SMPS)
  • Server/Telecom Power Supplies
  • Industrial Power Supplies
  • Solar
  • UPS Package TO-220-2 Part Number Package Marking C6D06065A TO-220-2 C6D06065 PIN 1 PIN 2 CASE VRRM = 650 V IF (TC=155˚C) = 6 A Qc = 23 nC Maximum Ratings (TC = 25 ˚C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note VRRM Repetitive Peak Reverse Voltage 650 V VDC DC Blocking Voltage 650 V IF Continuous Forward Current A TC=25˚C TC=125˚C TC=155˚C Fig. 3 IFRM Repetitive Peak Forward Surge Current 28

17 A TC=25˚C, tP = 10 ms, Half Sine Wave

TC=110˚C, tP=10 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 51

46 A TC=25˚C, tp = 10 ms, Half Sine Wave

TC=110˚C, tp = 10 ms, Half Sine Wave Fig. 8 IF,Max Non-Repetitive Peak Forward Surge Current 520

470 A TC=25˚C, tP = 10 µs, Pulse

TC=110˚C, tP = 10 µs, Pulse Fig. 8 Ptot Power Dissipation 73

32 W TC=25˚C

TC=110˚C Fig. 4 TJ , Tstg Operating Junction and Storage Temperature -55 to +175 ˚C TO-220 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw

C6D06065A, Rev. -, 04-2019

Electrical Characteristics

Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.27 1.37 1.50

1.60 V IF = 6 A TJ=25°C

IF = 6 A TJ=175°C Fig. 1 IR Reverse Current 2 120 μA VR = 650 V TJ=25°C VR = 650 V TJ=175°C Fig. 2 QC Total Capacitive Charge 23 nC VR = 400 V, IF = 6 A TJ = 25°C Fig. 5 C Total Capacitance 394 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Fig. 6 EC Capacitance Stored Energy 3.5 μJ VR = 400 V Fig. 7 Note: This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Unit Note RθJC Thermal Resistance from Junction to Case 2.05 °C/W Fig. 9 Typical Performance Figure 1. Forward Characteristics Figure 2. Reverse Characteristics

Figure 7. Capacitance Stored Energy Figure 9. Transient Thermal Impedance

0.01 SinglePulse

Figure 8. Non-repetitive peak forward surge current

C6D06065A, Rev. -, 04-2019 POS Inches Millimeters Min Max Min Max A .381 .410 9.677 10.414 B .235 .255 5.969 6.477 C .100 .120 2.540 3.048 D .223 .337 5.664 8.560 D1 .457-.490 11.60-12.45 typ D2 .277-.303 typ 7.04-7.70 typ D3 .244-.252 typ 6.22-6.4 typ E .590 .615 14.986 15.621 E1 .302 .326 7.68 8.28 E2 .227 251 5.77 6.37 F .143 .153 3.632 3.886 G 1.105 1.147 28.067 29.134 H .500 .550 12.700 13.970 L .025 .036 .635 .914 M .045 .055 1.143 1.550 N .195 .205 4.953 5.207 P .165 .185 4.191 4.699 Q .048 .054 1.219 1.372 S 3° 6° 3° 6° T 3° 6° 3° 6° U 3° 6° 3° 6° V .094 .110 2.388 2.794 W .014 .025 .356 .635 X 3° 5.5° 3° 5.5° Y .385 .410 9.779 10.414 z .130 .150 3.302 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish PIN 1 PIN 2 CASE Recommended Solder Pad Layout Part Number Package Marking C6D06065A TO-220-2 C6D06065 TO-220-2 Note: Recommended soldering profiles can be found in the applications note here: http://www.wolfspeed.com/power_app_notes/soldering Package Dimensions Package TO-220-2

C6D06065A, Rev. -, 04-2019 Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power

  • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the thresh- old limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfpseed representative or from the Product Ecology section of our website at http://www.wolfspeed.com/Power/Tools-and-Support/Product-Ecology.
  • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree represen- tative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.
  • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Notes
  • Cree SiC Schottky diode portfolio: http://www.wolfspeed.com/Power/Products#SiCSchottkyDiodes
  • Schottky diode Spice models: http://www.wolfspeed.com/power/tools-and-support/DIODE-model-request2
  • SiC MOSFET and diode reference designs: http://go.pardot.com/l/101562/2015-07-31/349i Related Links