C5250 VECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Reflow Process Compatible Optional Telecom & Wireless Infrastructure ACMOS, TTL and LVPECL Digital Switching
Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com Signal Level (Voh) 4.5 VDC Vs= 5.0V and 15pF load Rise and fall times for TTL (measured 0.8V to 2.0V) ns ns 1.0 to 23.9 MHz 24 to 125 MHz Duty Cycle @ 1.4V < 15 MHz @ 1.4V > 15 MHz Signal PECL/LVPECL RFP Load Into Vs-2V or Thevenin Equivalent Signal Level (Vol) Vs -1.62 VDC Signal Level (Voh) Vs- 1.025 VDC Start-up Time mS Rise and fall times (measured @ 20% to 80%) 1000 600 ps ps <100 MHz > 100 MHz Duty cycle LVPECL @ 50% Vdd @ 50% Vdd Jitter (rms) ps ps BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz Period Jitter (pk-pk) ps 10,000 samples- Rising edge Frequency Tuning (EFC) Parameter Min Typ Max. Units Condition Ordering Code Absolute Pull Range ±30 ppm AP033 ±50 ppm AP050 Linearity Tuning Slope Positive Control Voltage Range 0.5 2.5 4.5 VDC with Vs=5.0VDC 0.3 1.65 3.0 VDC with Vs=3.3VDC Additional parameters Parameter Min Typ Max. Units Condition Phase Noise -60 dBc/Hz Hz Measured @ 52.00 MHz -90 dBc/Hz 100 Hz -120 dBc/Hz kHz -140 dBc/Hz kHz -145 dBc/Hz 100 kHz -50 dBc/Hz Hz Measured @ 155.52 MHz -80 dBc/Hz 100 Hz -110 dBc/Hz kHz -133 dBc/Hz kHz -145 dBc/Hz 100 kHz Weight g Processing & Packing Handling & processing note Output Enable6 Logic "0" input = Outputs disabled (Tri-state) Logic "1" or floating input = Outputs enabled) ACMOS/TTL Output Logic "0" or floating input = Outputs enabled Logic "1" input = Outputs disabled (Tri-state) PECL/LVPECL Output Weight g Processing & Packing Handling & processing note
Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com Absolute Maximum Ratings Parameter Min Typ Max. Units Condition Supply voltage (Vs) 7.0 V Vs=5.0VDC 7.0 V Vs=3.3VDC Operable temperature range -55 +85 Storage temperature range -55 +125 Enclosures Type A - ACMOS/TTL Type B -PECL/ LVPECL Package Codes: Code Height H Pin Length L Code Height H Pin Length L 1.88±0.178 N/A 1.88±0.178 N/A E2 = Enable/Disable pin 2 E2 = Enable/Disable pin 2 X = N/C pin 2 X = N/C pin 2 Pin Connections Pin Connections Control Voltage Control Voltage Enable/Disable or N/C Enable/Disable or N/C Ground (Case) Ground (Case) RF Output RF Output N/C Complementary Output Suppy Voltage Supply Voltage
Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Supply Voltage Code Output Code APR Code Package Code Enable/Disable C5250 Example: C5250 SV050 RFA AP050 Step 2 The factory representative will then respond with a Corning Model Number in the following Configuration: Model Package Code Dash Dash Number C5250 [Customer Specified Package Code] [Factory Generated 4 digit number] Typical P/N C5250A1-001 Notes: Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) Phase noise degrades increasing output frequency. Subject to technical modification. Contact factory for availability. Contact factory for other options.