C4D02120A_14 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- 1.2kV Schottky Rectifier
- Zero Reverse Recovery Current
- High-Frequency Operation
- Temperature-Independent Switching
- Extremely Fast Switching Benefits
- Replace Bipolar with Unipolar Rectifiers
- Essentially No Switching Losses
- Higher Efficiency
- Reduction of Heat Sink Requirements
- Parallel Devices Without Thermal Runaway
Applications
- Switch Mode Power Supplies
- Power Factor Correction
- Motor Drives Package TO-220-2 Maximum Ratings (TC=25°C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note VRRM Repetitive Peak Reverse Voltage 1200 V VRSM Surge Peak Reverse Voltage 1300 V VR DC Peak Reverse Voltage 1200 V IF Continuous Forward Current A TC=25˚C TC=135˚C TC=165˚C IFRM Repetitive Peak Forward Surge Current 13
8.4 A TC=25˚C, tP=10 ms, Half Sine Pulse
TC=110˚C, tP=10 ms, Half Sine Pulse IFSM Non-Repetitive Forward Surge Current 19
16.5 A TC=25˚C, tP=10 ms, Half Sine Pulse
TC=110˚C, tP=10 ms, Half Sine Pulse IF,Max Non-Repetitive Peak Forward Current 200
160 A TC=25˚C, tP=10 ms, Pulse
TC=110˚C, tP=10 ms, Pulse Ptot Power Dissipation 60
26 W TC=25˚C
TC=110˚C TJ Operating Junction Range -55 to +175 ˚C Tstg Storage Temperature Range -55 to +135 ˚C TO-220 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw Part Number Package Marking C4D02120A TO-220-2 C4D02120 PIN 1 PIN 2 CASE VRRM = 1200 V IF (TC=135˚C) = 5 A Qc = 11 nC
C4D02120A Rev. C
Electrical Characteristics
Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.4 1.9 1.8
3 V IF = 2 A TJ=25°C
IF = 2 A TJ=175°C IR Reverse Current 10 150 μA VR = 1200 V TJ=25°C VR = 1200 V TJ=175°C QC Total Capacitive Charge 11 nC VR = 800 V, IF = 2A di/dt = 200 A/μs TJ = 25°C C Total Capacitance 167 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz VR = 800 V, TJ = 25˚C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note RθJC Thermal Resistance from Junction to Case 2.5 °C/W Typical Performance 0.5 1.5 2.5 3.5 0 0.5 1 1.5 2 2.5 3 3.5 IF Forward Current (A) VF Forward Voltage Figure 1. Forward Characteristics Figure 2. Reverse Characteristics
C4D02120A Rev. C Recommended Solder Pad Layout Part Number Package Marking C4D02120A TO-220-2 C4D02120 TO-220-2 A C E D G H B J L M N F P Q S T U V W X Y M i n M a x M i n M a x A . 3 9 5 . 4 1 0 1 0 . 0 3 3 1 0 . 4 1 4 B . 2 3 5 . 2 5 5 5 . 9 6 9 6 . 4 7 7 C . 1 0 2 . 1 1 2 2 . 5 9 1 2 . 8 4 5 D . 3 3 7 . 3 3 7 8 . 5 6 0 8 . 5 6 0 E . 5 9 0 . 6 1 0 1 4 . 9 8 6 1 5 . 4 9 4 F . 1 4 9 . 1 5 3 3 . 7 8 5 3 . 8 8 6 G 1 . 1 2 7 1 . 1 4 7 2 8 . 6 2 6 2 9 . 1 3 4 H . 5 3 0 . 5 5 0 1 3 . 4 6 2 1 3 . 9 7 0 J L . 0 2 8 . 0 3 6 . 7 1 1 . 9 1 4 M . 0 4 5 . 0 5 5 1 . 1 4 3 1 . 3 9 7 N . 1 9 5 . 2 0 5 4 . 9 5 3 5 . 2 0 7 P . 1 7 0 . 1 8 0 4 . 3 1 8 4 . 5 7 2 Q . 0 4 8 . 0 5 4 1 . 2 1 9 1 . 3 7 1 S 3 ° 5 ° 3 ° 5 ° T 3 ° 5 ° 3 ° 5 ° U 3 ° 5 ° 3 ° 5 ° V . 1 0 0 . 1 1 0 2 . 5 4 2 . 7 9 4 W . 0 1 4 . 0 2 1 . 3 5 6 . 5 3 3 X 3 ° 5 ° 3 ° 5 ° Y . 3 9 5 . 4 1 0 1 0 . 0 3 3 1 0 . 4 1 4 Z . 1 3 0 . 1 5 0 3 . 3 0 2 3 . 8 1 0 I n c h e s M i l l i m e t e r sP O S R 0 . 0 1 0 R 0 . 2 5 4 1 2 Z Package Dimensions Package TO-220-2 POS Inches Millimeters Min Max Min Max A .381 .410 9.677 10.414 B .235 .255 5.969 6.477 C .100 .120 2.540 3.048 D .223 .337 5.664 8.560 E .590 .615 14.986 15.621 F .143 .153 3.632 3.886 G 1.105 1.147 28.067 29.134 H .500 .550 12.700 13.970 J R 0.197 R 0.197 L .025 .036 .635 .914 M .045 .055 1.143 1.397 N .195 .205 4.953 5.207 P .165 .185 4.191 4.699 Q .048 .054 1.219 1.372 S 3° 6° 3° 6° T 3° 6° 3° 6° U 3° 6° 3° 6° V .094 .110 2.388 2.794 W .014 .025 .356 .635 X 3° 5.5° 3° 5.5° Y .385 .410 9.779 10.414 z .130 .150 3.302 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish PIN 1 PIN 2 CASE Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering
C4D02120A Rev. C Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power
- RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com.
- REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemi- cal Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.
- This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Notes Diode Model Note: TJ = Diode Junction Temperature In Degrees Celsius VT RT Diode Model CSD04060 Vf T = VT + If*RT VfT = VT+If*RT