C499

C499 VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

REV DESCRIPTION DATE PREP APPD B 05-0448 3/1/05 KS KS APPROVALS DATE VECTRON INTERNATIONAL MOUNT HOLLY SPRINGS, PA 17065 PREPARED BY K. Sheriff 3/3/03 OSCILLATOR SPECIFICATION 00136 A OS-80001 B UNSPECIFIED TOLERANCES: N/A SHEET 1 0F 15 VECTRON INTERNATIONAL PROPRIETARY

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 2 C499 R A -0001 S

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 3

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 4

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 5

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 6 Completed assembly and screening lot travelers, including rework history. Electrical test variables data, identified by unique serial number. Specify the detailed environmental conditions for the oscillator on the Order Entry Sheet attached to the end of this document. If the requirement is Not Applicable place an NA in the appropriate field.

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 7

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 8 TABLE 1 - Class 1 and 3 Test Matrix

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 9 TABLE 2 - Class 2 Test Matrix

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 10 Enclosure: Type B (Class 1) Figure 1 Material: CRS Finish: Hot Solder Dip per MIL-F-14072 Weight:: < 125 grams Pin Connections 1 CASE GROUND 2 EFC 3 RF OUTPUT 4 INPUT VOLTAGE, OVEN 5 INPUT VOLTAGE, OSCILLATOR 6 OVEN READY INDICATOR (If Required)

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 11 Enclosure: Type C (Class 2) Figure 2 Material: Kovar per ASTM F-15 Finish: Gold plating per MIL-G-45204, Type III, Grade A, Class 1 over electrodeposited nickel per QQ-N-290, Class 1 except that the plating thickness shall be 100 to 250 microinches. Weight: < 30 grams Pin Connections 1 EFC 2-11 N/C 12 CASE GROUND 13 RF OUTPUT 14-23 N/C 24 INPUT VOLTAGE

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 12 Enclosure: Type D (Class 3) Figure 3 Material: 6061-T6 Aluminum Finish: Gold Plating per MIL-G-45204, 50u min. over Electrodeposited Nickel IAW QQ-N-290 Class I, Grade E Weight: < 100 grams Pin Connections 1 INPUT VOLTAGE 2 EFC (SMA FEMALE) 3 GROUND 4 RF OUTPUT (SMA FEMALE)

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 13 Frequency (Fo) MHz 1MHz -125MHz Set-on Tolerance Hz Input Voltage 1 VDC 5V,12V,15V Input Power 1 Turn-on W Steady State @ +25°C W Steady State @ Minimum Operating Temperature W Input Voltage 2 VDC 5V,12V,15V Input Power 2 Turn-on W Steady State @ +25°C W Steady State @ Minimum Operating Temperature W RF Output Power dBm 0 to +10dBm Harmonics dBc Spurious (Fo ±1MHz) dBc Spurious (DC to 1.6GHz) dBc Electronic Frequency Control Input Voltage Range V Frequency Deviation F/F Slope Negative or Positive --- Linearity % Oven Ready Indicator Turn-on V Steady State V

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 14 FREQUENCY STABILITY1,2,4 Parameter Limit (max.) Unit Condition Frequency vs. Temperature F/F Warm-up Time Temperature = +25°C F/F F, ____ minutes to ____ minutes after turn-on Temperature = Minimum Operating Temperature F/F F, ____ minutes to ____ minutes after turn-on Frequency vs. Voltage F/F Frequency vs. Load F/F Aging Daily F/F At time of shipment Yearly F/F Other F/F Phase Noise (Static)

1 Hz dBc/Hz

10 Hz dBc/Hz

100 Hz dBc/Hz

Short Term Stability (Static) = 0.01 sec. F/F = 0.1 sec. F/F = 1.0 sec F/F = 10.0 sec. F/F Acceleration Sensitivity (2g tip-over) X axis ppb/g Y axis ppb/g Z axis ppb/g Total gamma ppb/g

SIZE CODE IDENT NO. UNSPECIFIED TOLERANCES DWG NO. REV. SHEET A 00136 N/A OS-80001 B 15 MECHANICAL SPECIFICATIONS1,4 Parameter Type Comment Customer Specified Enclosure A Customer Outline Required Class 1 Oscillators B See Figure 1 Class 2 Oscillators C See Figure 2 Class 3 Oscillators D See Figure 3 ENVIRONMENTAL CONDITIONS1,4 Parameter Limit (min.) Limit (max.) Unit Condition Operating Temperature Range °C Extended Temperature Range °C Operational, non-specification compliant Storage Temperature Range °C Radiation Rad(Si) Random Vibration MIL-STD-202, Method 214, Test Condition ____, Letter _____ Vibration, High Frequency MIL-STD-202, Method 204, Test Condition ____ Shock MIL-STD-202, Method 213, Test Condition ____ Ambient Pressure MIL-STD-202, Method 105, Test Condition ____ Constant Acceleration MIL-STD-202, Method 212, Test Condition ____ Humidity (Steady State) MIL-STD-202, Method 103, Test Condition ____ ADDITIONAL INFORMATION4 Parameter Required Condition / Comment Group A Inspection Group B Inspection Group C Inspection Internal Water-Vapor Content (RGA) Destruct Physical Analysis (DPA) Manufacturers Parts List Deliverable Process Identification Documentation (PID) Program Management Customer Source Inspection (pre-cap / final) OTHER: (List Below) Notes: 1 Not all options and codes are available at all frequencies and configurations. 2 Unless otherwise stated, all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Mean Time Between Failure calculated IAW MIL-HDBK-217 4 Any field left blank will be assigned N/A. See paragraph 6.2 for additional information.