C4700 VECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
CDMA2000 and UMTS Base Stations Ultra-High Stability Test and Measurement Equipment Excellent Temperature Stability SC-Cut Crystal Crystal Previous Vectron Model Numbers 4895, OC-050, CO-330 Frequency range
4 MHz 15 MHz
5; 10; 15MHz Frequency stabilities1 [SC Cut Crystal Standard] Parameter Min Typ Max. Units Operating temp range Ordering Code vs. operating temperature range -0.4 +0.4 ppb +70°C C049 (peak to peak stability) -0.2 +0.2 ppb +70°C C029 Parameter Min Typ Max. Units Condition Initial tolerance vs. supply voltage change vs. load change vs. aging /1 day vs. aging /1 day vs aging /1 Year vs. aging / year (following years) -50 -0.2 -0.1 -0.5 -0.2 -20 -10 +50 +0.2 +0.1 +0.5 +0.2 +20 +10 ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ± 5% Load ± 5% after 72 hours of operation after 7 days of operation after 72 hours of operation Warm-up Time minutes to 10ppb of final frequency (1 hour reading) @ +25°C Supply voltage (Vs) Parameter Min Typ Max. Units Condition Ordering Code Supply voltage [Standard] 11.4 12.0 12.6 VDC SV120 Power consumption 4.5 Watts during warm-up 1.0 Watts steady state @ +25°C RF output Parameter Min Typ Max. Units Condition Ordering Code Signal [Standard] HCMOS RFH Load pF Signal Level (Vol) 0.5 VDC 15pF load Signal Level (Voh) 4.5 VDC 15pF load Duty cycle @ (Voh-Vol)/2 Signal [Option] Sinewave RFS Load Output Power +3.0 +5.5 +8.0 dBm
50 Ohm load
-30 dBc -40 dBc Frequency Tuning (EFC) Parameter Min Typ Max. Units Condition Tuning Range 0.50 0.75 1.0 ppm Linearity Tuning Slope Positive Control Voltage Range 0.0 2.5 5.0 VDC
Vectron International · www.vectron.com v.2005-08-31 · page 2 of 4 Vectron International Headquarters
267 Lowell Road
Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC.
100 Watts Street
Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax Reference Voltage Output (Vref) Parameter Min Typ Max. Units Condition Reference Voltage 5.0 VDC See Note 5 Enclosures Type A Package Codes: Code Height H Pin Length L 25.40 6.35 19.00 6.35 38.07 6.35 Dimensions: mm Pin Connections Electronic Frequency Control Input (EFC) Reference Voltage Output (Option) RF Output Ground (Case) Supply Voltage Input (Vs)
Vectron International · www.vectron.com v.2005-08-31 · page 3 of 4 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax Additional parameters Parameter Min Typ Max. Units Condition Phase Noise -90 dBc/Hz Hz at 10 MHz -120 dBc/Hz Hz -135 dBc/Hz 100 Hz -140 dBc/Hz kHz -140 dBc/Hz >10 kHz Weight 140 g Absolute Maximum Ratings Parameter Min Typ Max. Units Condition Supply voltage (Vs) V Output Load pF with HCMOS signal Ohms with Sinewave signal Operable temperature range -55 +85 Storage temperature range -55 +125 How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Stability Code Supply Voltage Code RF Output Code Package Code Frequency C4700 SV120 Example: C4700 C049 SV120 RFH 10.000Mhz Step 2 The factory representative will then respond with a Vectron Model Number in the following configuration: Model Package Code Dash Dash Number C4700 [Customer Specified Package Code] [Factory Generated 4 digit number] Typical P/N = C4700A1-0001 Notes: Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) Phase noise degrades with increasing output frequency. Subject to technical modification. Contact factory for availability.
Vectron International · www.vectron.com v.2005-08-31 · page 4 of 4 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax [ THIS PAGE INTENTIONALLY BLANK ]