DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Subject to change without notice. www.cree.com

FEATURES

  • Lambertian Radiation Pattern
  • Anode-up design (p-pad up)
  • EZB right LED Technology, binned @ 700 mA – 450 nm - 1120+ mW – 460 nm - 1120+ mW
  • Low Forward Voltage (Vf) – 3.2 V Typical at 700 mA
  • Maximum DC Forward Current – 3000 mA
  • Backside Metal versions for various attach methods: -A (AuSn) for use with Conductive Adhesives, Flux Eutectic Attach, Solder Paste & Solder Preforms -G (LTDA) for Low Temperature Flux Eutectic Attach Cree® EZ1950-p™ LEDs Data Sheet (Anode up) CxxxEZ1950-Sxxxx00-x Cree’s EZBright® LEDs are the newest generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree’s proprietary optical design and device submount technology to deliver superior value for high- intensity LEDs. The optical design maximizes light extraction efficiency and enables a Lambertian radiation pattern. Additionally, these LEDs are die-attachable with conductive adhesive, solder paste or solder preforms, as well as flux eutectic attach. These vertically structured, low forward voltage LED chips are approximately 220 microns in height and are tested for conformity to optical and electrical specifications. Cree’s EZ™ chips are useful in a broad range of applications such as general illumination, automotive lighting and mobile flash. D ata Sheet: CPR3G T Rev - CxxxEZ1950-Sxxxx00-x Chip Diagram

APPLICATIONS

  • General Illumination – Aircraft – Decorative Lighting – Task Lighting – Outdoor Illumination
  • White LEDs
  • Projection Displays
  • Automotive Exterior
  • Mobile Flash Cathode (-) Anode (+), 2 places Thickness 220 µm Backside Ohmic Metallization Bottom View Side View Top View 1930 x 1930 µm Bond pads (2), 130 x 130 µm Mesa (Junction), 1900 x 1900 µm

© 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, and EZBright® are registered trademarks, and EZ™ and EZ1950-p™ are trademarks of Cree, Inc. CPR3GT Rev - (201502) Cree, Inc.

4600 Silicon Drive

Durham, NC 27703-8475 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/chips Maximum Ratings at TA = 25°C Notes 1 & 3 CxxxEZ1950-Sxxxx00-x DC Forward Current 3000 mA Peak Forward Current (1/10 duty cycle @ 1 kHz) 4000 mA Note 4 LED Junction Temperature 150°C Reverse Voltage 5 V Operating Temperature Range -40°C to +100°C LED Chip Storage Temperature -40°C to +120°C Recommended Die Sheet Storage Conditions ≤30°C / ≤85% RH Typical Electrical/Optical Characteristics at TA = 25°C, If = 700 mA Note 2 Part Number Forward Voltage (Vf, V) Reverse Current [I(Vr=5V), μA] Full Width Half Max (λD, nm) C450EZ1950-Sxxxx00-x 2.9 3.2 3.6 2 20 C460EZ1950-Sxxxx00-x 2.9 3.2 3.6 2 21 Mechanical Specifications CxxxEZ1950-Sxxxx00-x Description Dimensions Tolerance P-N Junction Area (μm) 1900 x 1900 ± 35 Chip Area (μm) 1930 x 1930 ± 35 Chip Thickness (μm) 220 ± 25 Top Au Bond Pad (μm) - Qty. 2 130 x 130 ± 25 Au Bond Pad Thickness (μm) 3.0 ± 1.5 Backside Ohmic Metal Area (μm) 1930 x 1930 ± 35 Backside Ohmic Metal Thickness (μm) 3.3 ± 1.5 Notes: 1. Maximum ratings are package-dependent. The above ratings were determined using a silicone encapsulated chip on MCPCB for characterization. Ratings for other packages may differ. The junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds). See Cree EZBright Applications Note for assembly-process information. 2. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 700 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are within the range of average values expected by the manufacturer in large quantities and are provided for information only. All measurements were made using a Au-plated TO39 header without an encapsulant. Optical characteristics were measured in an integrating sphere using Illuminance E. 3. The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end-product to be designed in a manner that minimizes the thermal resistance from the LED junction to ambient in order to optimize product performance. 4. Peak Forward Current is an estimate only and under evaluation. 500 1000 1500 2000 2500 3000 3500 0 25 50 75 100 125 150 Maximum Operating Current (mA) Ambient Temperature (°C) Rth j-a = 4 °C/W Rth j-a = 7 °C/W Rth j-a = 10 °C/W Rth j-a = 15 °C/W

© 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, and EZBright® are registered trademarks, and EZ™ and EZ1950-p™ are trademarks of Cree, Inc. CPR3GT Rev - (201502) Cree, Inc. Durham, NC 27703-8475 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/chips Standard Bins for CxxxEZ1950-Sxxx00-x LED chips are sorted to the radiant flux and dominant wavelength bins shown. A sorted die sheet contains die from only one bin. Sorted die kit (CxxxEZ1950-Sxxx00-x) orders may be filled with any or all bins (CxxxEZ1950-0xxx-x) contained in the kit. All radiant flux and dominant wavelength values shown and specified are at If = 700 mA. Radiant flux values are measured using Au-plated headers without an encapsulant. C450EZ1950-S112000-x C450EZ1950-0229-x C450EZ1950-0230-x C450EZ1950-0231-x C450EZ1950-0232-x C450EZ1950-0225-x C450EZ1950-0226-x C450EZ1950-0227-x C450EZ1950-0228-x C450EZ1950-0221-x C450EZ1950-0222-x C450EZ1950-0223-x C450EZ1950-0224-x C450EZ1950-0217-x C450EZ1950-0218-x C450EZ1950-0219-x C450EZ1950-0220-x C450EZ1950-0213-x C450EZ1950-0214-x C450EZ1950-0215-x C450EZ1950-0216-x C450EZ1950-0209-x C450EZ1950-0210-x C450EZ1950-0211-x C450EZ1950-0212-x C450EZ1950-0205-x C450EZ1950-0206-x C450EZ1950-0207-x C450EZ1950-0208-x 1360 1320 1280 1240 1200 1160 1120 Dominant Wavelength (nm) 447.5 450 452.5445 455 C460EZ1950-S112000-x C460EZ1950-0229-x C460EZ1950-0230-x C460EZ1950-0231-x C460EZ1950-0232-x C460EZ1950-0225-x C460EZ1950-0226-x C460EZ1950-0227-x C460EZ1950-0228-x C460EZ1950-0221-x C460EZ1950-0222-x C460EZ1950-0223-x C460EZ1950-0224-x C460EZ1950-0217-x C460EZ1950-0218-x C460EZ1950-0219-x C460EZ1950-0220-x C460EZ1950-0213-x C460EZ1950-0214-x C460EZ1950-0215-x C460EZ1950-0216-x C460EZ1950-0209-x C460EZ1950-0210-x C460EZ1950-0211-x C460EZ1950-0212-x C460EZ1950-0205-x C460EZ1950-0206-x C460EZ1950-0207-x C460EZ1950-0208-x 1360 1320 1280 1240 1200 1160 1120 457.5 460 462.5455 465 Dominant Wavelength (nm) Radiant Flux (mW)Radiant Flux (mW)

© 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, and EZBright® are registered trademarks, and EZ™ and EZ1950-p™ are trademarks of Cree, Inc. CPR3GT Rev - (201502) Cree, Inc. Durham, NC 27703-8475 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/chips Characteristic Curves, TA = 25°C This is a representative measurement for the EZ1950 LED product. Actual curves will vary slightly for the various radiant flux and dominant wavelength bins. 100% 200% 300% 400% 0 1000 2000 3000 Relative Light Intensity If (mA) Relative Intensity vs. Forward Current 0 1000 2000 3000 DW Shift (nm) If (mA) Wavelength Shift vs. Forward Current 500 1000 1500 2000 2500 3000 2 3 4 5 If (mA) Vf (V) Forward Current vs. Forward Voltage -0.400 -0.300 -0.200 -0.100 0.000 25 50 75 100 125 150 Voltage Shift (V) Junction Temperature (°C) Voltage Shift Vs Junction Temperature 25 50 75 100 125 150 DW Shift (nm) Junction Temperature (°C) Dominant Wavelength Shift Vs Junction Temperature 70% 75% 80% 85% 90% 95% 100% 25 50 75 100 125 150 Relative Light Intensity Junction Temperature (°C) Relative Light Intensity Vs Junction Temperature

© 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, and EZBright® are registered trademarks, and EZ™ and EZ1950-p™ are trademarks of Cree, Inc. CPR3GT Rev - (201502) Cree, Inc. Durham, NC 27703-8475 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/chips Radiation Pattern This is a representative radiation pattern for the EZ LED products. Actual patterns will vary slightly for each chip.