C4530

C4530 VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

AT-Cut and SC-Cut Crystal Options Digital Switching Low Profile Compact Package Previous Vectron Model Numbers OCO1000, C4500 Frequency range

10 MHz – 160 MHz

Frequency stabilities1 [AT Cut Crystal – 10 MHz to 160MHz] Parameter Min Typ Max. Units Operating temp range Ordering Code vs. operating temperature range -100 +100 ppb -20 … +70°C D107 (Referenced to +25°C) -250 +250 ppb -20 … +70°C D257 -250 +250 ppb -40 … +85°C F257 Parameter Min Typ Max. Units Condition Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year vs. aging / year -500 -20 -10 -10 -300 -500 +500 +20 +10 +10 +300 +500 ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation ≤ 60MHz; after 30 days of operation >60MHz; after 30 days of operation Warm-up Time minutes to ± 100ppb of final frequency (1 hour reading) @ +25°C Frequency stabilities1 [SC Cut Crystal – 15 to 40 MHz] Parameter Min Typ Max. Units Operating temp range Ordering Code vs. operating temperature range -25 +25 ppb -20 … +70°C D258 (Referenced to +25°C) -50 +50 ppb -40 … +85°C F508 Parameter Min Typ Max. Units Condition Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging /1 Year vs. aging / year (following Years) -200 -5.0 -5.0 -1.0 -100 -80 +200 +5.0 +5.0 +1.0 +100 +80 ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation after 30 days of operation Warm-up Time minutes to ± 10ppb of final frequency (1 hour reading) @ +25°C Supply voltage (Vs) Parameter Min Typ Max. Units Condition Ordering Code Supply voltage [Standard] 4.75 5.25 VDC SV050 Supply voltage [Option] 3.135 3.3 3.465 VDC SV033 Power consumption 2.5 Watts during warm-up 1.0 Watts steady state @ +25°C

Vectron International · www.vectron.com v.2006-02-24 · page 2 of 6 Vectron International Headquarters

267 Lowell Road

Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC.

100 Watts Street

Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax RF output Parameter Min Typ Max. Units Condition Ordering Code Signal [Standard] HCMOS RFH Load pF Signal Level (Vol) 0.5 VDC with Vs=r 5.0V and 15pF load 0.3 VDC with Vs=3.3V and 15pF load Signal Level (Voh) 3.7 VDC with Vs= 5.0V and 15pF load 2.4 VDC with Vs=3.3V and 15pF load Duty cycle @ (Voh-Vol)/2 Signal [Option] Sinewave RFS Load Ω Output Power +2.5 +5.0 dBm

50 Ohm load

-30 dBc Frequency Tuning (EFC) Parameter Min Typ Max. Units Condition Tuning Range ±1.0 ±1.75 ±2.5 ppm with SC Cut Crystal ±3.0 ±5.0 ppm with AT Cut Crystal Linearity Tuning Slope Positive Control Voltage Range 0.0 2.0 4.0 VDC with Vs=5.0VDC 0.0 1.4 2.8 VDC with Vs=3.3VDC Reference Voltage Output (Vref) Parameter Min Typ Max. Units Condition Reference Voltage 3.85 4.0 4.15 VDC with Vs=5.0VDC 2.7 2.8 2.9 VDC with Vs=3.3VDC Additional parameters Parameter Min Typ Max. Units Condition Phase Noise -75 dBc/Hz 1 Hz with 30.72 MHz -110 dBc/Hz 10 Hz SC-Cut -135 dBc/Hz 100 Hz HCMOS -150 dBc/Hz 1 kHz -150 dBc/Hz 10 kHz Phase Noise -75 dBc/Hz 10 Hz with 110 MHz AT Cut -105 dBc/Hz 100 Hz Sinewave -130 dBc/Hz 1 kHz -155 dBc/Hz 10 kHz -160 dBc/Hz 100 kHz Weight g Processing & Packing Handling & processing note Absolute Maximum Ratings Parameter Min Typ Max. Units Condition Supply voltage (Vs) 7.0 V with Vs=5.0VDC 7.0 V with Vs=3.3VDC Output Load pF Operable temperature range -55 +85 Storage temperature range -55 +125

Vectron International · www.vectron.com v.2006-02-24 · page 3 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Enclosures Type A, for HCMOS output Type B, for Sinewave output, only with reduced AT-stabilities available Type C, for HCMOS output Package Codes: Code Height “H” Pin Length “L” Code Height “H” Pin Length “L” Code Height “H” Pin Length “L” 12.1 N/A 12.1 N/A 12.1 N/A 7.8 N/A 7.8 N/A 7.8 N/A Pin Connections Pin Connections Pin Connections

1 Electronic Frequency Control Input (EFC)

1 RF Output

Electronic Frequency Control Input (EFC)

2 Reference Voltage Output

2 N.C. Reference Voltage Output

3 Supply Voltage Input (Vs)

3 Ground (Case)

Supply Voltage Input (Vs)

4 RF Output

4 N.C. RF Output

5 Oven Alarm

5 Electronic Frequency Control Input (EFC)

Ground (Case) 6 I.C. Intern Connected

6 Supply voltage Vs oscillator

7 Ground (Case)

7 Supply voltage Vs heater

*Pin 6 must be remain unconnected.

Vectron International · www.vectron.com v.2006-02-24 · page 4 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Standard Shipping Method *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Gurtoberseite Tape upper side Gurtunterseite Tape buttom side Abwickelrichtung Unwinding direction Lage im Gurt Position in tape Pin 1 A X P B K Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P Type A1/A2 37.5 175 or 230

Vectron International · www.vectron.com v.2006-02-24 · page 5 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Recommended Reflow Profile Profile Feature Pb-Free Assembly /Sn-Pb Assembly Profile Feature Pb-Free Assembly /Sn-Pb Assembly Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 150°c 200°c 60-180 seconds Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Peak Temperature (Tp) max 260°C Ramp-down Rate 6°C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. Processing note: This FR 4 based SMD OCXO is a non-hermetic construction for use in No-Clean reflow processes and is 6/6 RoHS compliant. If you intend to wash this SMD OCXO, please contact your Sales representative to discuss the possibility. Critical Zone TL to Tp Ramp up Ramp dow n t 25°C to peak Tp Temperature TL Time Ts Ts ts preheat tp tL

Vectron International · www.vectron.com v.2006-02-24 · page 6 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Stability Code Supply Voltage Code RF Output Code Package Code Frequency C4530 Example: C4530 D207 SV050 RFH 20.0MHz Step 2 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model Package Code Dash Dash Number C4530 [Customer Specified Package Code] [Factory Generated 4 digit number] Typical P/N = C4530A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability.