C3530

C3530 VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Vectron International · www.vectron.com v.2005-10-28 · page 1 of 6 Vectron International Headquarters

267 Lowell Road

Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC.

100 Watts Street

Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Typical Applications Features Base Stations Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Previous Vectron Model Numbers FCXO100 Output Frequency range 10 MHz – 200 MHz Standard frequencies 52; 61.44MHz Reference Frequency Parameter Min Typ Max. Units Condition Ordering Code Input frequency Pin 2 1 160 MHz ± 2 ppm Standard input frequencies 10 MHz X106

13 MHz X136

26 MHz X266

32,768 MHz X326 Parameter Min Typ Max. Units Condition Reference Level Reference Input Impedance Harmonics 0.5 -30 Vpp kΩ dBc @ 2 kΩ Output Frequency Parameter Min Typ Max. Units Condition Ordering Code output frequency Pin 4 10 200 MHz Standard output frequencies 52 MHz X526

61.44 X616

Supply voltage (Vs) Parameter Min Typ Max. Units Condition Ordering Code Supply voltage [Standard] 3.135 3.3 3.465 VDC SV033 Current consumption 50 mA steady state @ +25°C & 3.3VDC RF output Parameter Min Typ Max. Units Condition Ordering Code Signal [Standard] HCMOS RFH Load 15 pF Signal Level (Vol) 0.3 VDC with Vs=3.3V and 15pF load Signal Level (Voh) 3.0 VDC with Vs=3.3V and 15pF load Rise and Fall time 5 ns Duty cycle 40 60 % @ (Voh-Vol)/2 Additional parameters Parameter Min Typ Max. Units Condition Phase Noise -80 dBc/Hz 10 Hz @ 61.44 MHz -110 dBc/Hz 100 Hz -135 dBc/Hz 1 Hz -150 dBc/Hz 10 kHz -155 dBc/Hz 100 kHz

Vectron International · www.vectron.com v.2005-10-28 · page 2 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Additional parameters Parameter Min Typ Max. Units Condition VCXO Control PIN 7 0.5 2.5 V Weight 9 g Processing & Packing Handling & processing note Operating temperature range Operable temperature range -20 -30 +70 +85 Storage temperature range -55 +125 °C Enclosures Type G227 Package Codes: Code Height “H” Pin Length “L” NA NA NA Pin Connections Description 1 Vs Power supply pin. External low frequency bypass capacitor should be connected 2 Ref. Frequency in High stabel input frequency for syncronisation, This input is AC coupled, so an external blocking capacitor is not necessary. 3 GND Ground connection. Keep traces physically short and connect immediately to ground plane for best performance 4 RF-OUT RF syncronised output. 5 GND Ground connection. Keep traces physically short and connect immediately to ground plane for best performance 6 Lock Detector Output Test output signal for PLL lock detected. Low signal à PLL out of lock High signal à PLL in lock Only for modul test or observance 7 VCXO Control Test output of the control voltage for the VCXO (0.5V to 2.8V) Only for modul test or observance Marking C3530A1-xxxx Frequency * VI AYYWW

Vectron International · www.vectron.com v.2005-10-28 · page 3 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Absolute Maximum Ratings Parameter Min Typ Max. Units Condition Supply voltage (Vs) 6.0 V Maximum output load @ CMOS 40 pF Typical measurement data Phase Noise and Jitter C3530A1 with 32.768MHz in &52MHz out Frequency range [Hz] Sφ(f) [dB] Jitter [ps rms] 100 Hz to 1.5 MHz -61,86 1.616 ps 50 kHZ to 1.5MHz -62,07 1.578 ps Block Diagramm VS 1 5 VCXO PLL Circuit Reference Frequency VCXO Lock Detector VCXO Control VCXO VS VS Loop Filter VS

Vectron International · www.vectron.com v.2005-10-28 · page 4 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Standard Shipping Method *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Gurtoberseite Tape upper side Gurtunterseite Tape buttom side Abwickelrichtung Unwinding direction Lage im Gurt Position in tape Pin 1A X P B K Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P G185B 44 37.5 280 32

Vectron International · www.vectron.com v.2005-10-28 · page 5 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax SMD oscillators must be on the top side of the PCB during the reflow process. Profile Feature Pb-Free Assembly/Sn-Pb Assembly Average ramp-up rate (TL to Tp) 3°C/second max. Preheat -Temperature Min Tsmin) -Temperature Min Ts max) -Time (min to max) (ts) 150°c 200°c 60-180 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (TL) - Time (t L) 217°C 60-150 seconds Peak Temperature (Tp) max 260°C Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Ramp-down Rate 6°C/second max. Time 25°C to Peak Temperature 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Critical Zone TL to Tp Ramp up Ramp down t 25°C to peak Tp Temperature TL Time Ts Ts ts preheat tp tL

Vectron International · www.vectron.com v.2005-10-28 · page 6 of 6 Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Ref. Freq Freq out Supply Voltage Code RF Output Code Package Code C3530 Example: C3530 X326 X526 SV033 RFC A1 Step 2 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model Package Code Dash Dash Number C3530 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N = C3530A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability.