C2D05120A_14 CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • 1.2kV Schottky Rectifier
  • Zero Reverse Recovery Current
  • Zero Forward Recovery Voltage
  • High-Frequency Operation
  • Temperature-Independent Switching Behavior
  • Extremely Fast Switching
  • Positive Temperature Coefficient on VF Benefits
  • Replace Bipolar with Unipolar Rectifiers
  • Essentially No Switching Losses
  • Higher Efficiency
  • Reduction of Heat Sink Requirements
  • Parallel Devices Without Thermal Runaway

Applications

  • Switch Mode Power Supplies
  • Power Factor Correction
  • Motor Drives
  • High Voltage Multipliers Package TO-220-2 Maximum Ratings (TC=25°C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note VRRM Repetitive Peak Reverse Voltage 1200 V VRSM Surge Peak Reverse Voltage 1200 V VR DC Peak Reverse Voltage 1200 V IF Continuous Forward Current 17.5 8.5 A TC=25˚C TC=135˚C TC=157˚C IFRM Repetitive Peak Forward Surge Current 30 A TC=25˚C, tP=10 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 100 A TC=25˚C, tP=10 µs, Pulse Ptot Power Dissipation 136

59 W TC=25˚C

TC=110˚C TJ , Tstg Operating Junction and Storage Temperature -55 to +175 ˚C TO-220 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw Part Number Package Marking C2D05120A TO-220-2 C2D05120 VRRM = 1200 V IF (TC=135˚C) = 8.5 A Qc = 28 nC

C2D05120 Rev. E

Electrical Characteristics

Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.6 2.6 1.8

3.0 V IF = 5 A TJ=25°C

IF = 5 A TJ=175°C IR Reverse Current 50 100 200 1000 µA VR = 1200 V TJ=25°C VR = 1200 V TJ=175°C QC Total Capacitive Charge 28 nC VR = 1200 V, IF = 5 A di/dt = 500 A/µs TJ = 25°C C Total Capacitance 455 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Unit RθJC Thermal Resistance from Junction to Case 1.1 °C/W Typical Performance Figure 1. Forward Characteristics Figure 2. Reverse Characteristics

Figure 6. Transient Thermal Impedance

C2D05120 Rev. E Recommended Solder Pad Layout TO-220-2 Part Number Package Marking C2D05120A TO-220-2 C2D05120 Package Dimensions Package TO-220-2 POS Inches Millimeters Min Max Min Max A .381 .410 9.677 10.414 B .235 .255 5.969 6.477 C .100 .120 2.540 3.048 D .223 .337 5.664 8.560 E .590 .615 14.986 15.621 F .143 .153 3.632 3.886 G 1.105 1.147 28.067 29.134 H .500 .550 12.700 13.970 J R 0.197 R 0.197 L .025 .036 .635 .914 M .045 .055 1.143 1.397 N .195 .205 4.953 5.207 P .165 .185 4.191 4.699 Q .048 .054 1.219 1.372 S 3° 6° 3° 6° T 3° 6° 3° 6° U 3° 6° 3° 6° V .094 .110 2.388 2.794 W .014 .025 .356 .635 X 3° 5.5° 3° 5.5° Y .385 .410 9.779 10.414 z .130 .150 3.302 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish A C E D G H B J L M N F P Q S T U V W X Y M i n M a x M i n M a x A . 3 9 5 . 4 1 0 1 0 . 0 3 3 1 0 . 4 1 4 B . 2 3 5 . 2 5 5 5 . 9 6 9 6 . 4 7 7 C . 1 0 2 . 1 1 2 2 . 5 9 1 2 . 8 4 5 D . 3 3 7 . 3 3 7 8 . 5 6 0 8 . 5 6 0 E . 5 9 0 . 6 1 0 1 4 . 9 8 6 1 5 . 4 9 4 F . 1 4 9 . 1 5 3 3 . 7 8 5 3 . 8 8 6 G 1 . 1 2 7 1 . 1 4 7 2 8 . 6 2 6 2 9 . 1 3 4 H . 5 3 0 . 5 5 0 1 3 . 4 6 2 1 3 . 9 7 0 J L . 0 2 8 . 0 3 6 . 7 1 1 . 9 1 4 M . 0 4 5 . 0 5 5 1 . 1 4 3 1 . 3 9 7 N . 1 9 5 . 2 0 5 4 . 9 5 3 5 . 2 0 7 P . 1 7 0 . 1 8 0 4 . 3 1 8 4 . 5 7 2 Q . 0 4 8 . 0 5 4 1 . 2 1 9 1 . 3 7 1 S 3 ° 5 ° 3 ° 5 ° T 3 ° 5 ° 3 ° 5 ° U 3 ° 5 ° 3 ° 5 ° V . 1 0 0 . 1 1 0 2 . 5 4 2 . 7 9 4 W . 0 1 4 . 0 2 1 . 3 5 6 . 5 3 3 X 3 ° 5 ° 3 ° 5 ° Y . 3 9 5 . 4 1 0 1 0 . 0 3 3 1 0 . 4 1 4 Z . 1 3 0 . 1 5 0 3 . 3 0 2 3 . 8 1 0 I n c h e s M i l l i m e t e r sP O S R 0 . 0 1 0 R 0 . 2 5 4 1 2 Z Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering

C2D05120 Rev. E Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power

  • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com.
  • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemi- cal Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.
  • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Notes