C230 NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
, O ne. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 Silicon Controlled Rectifier Reverse Blocking Triode Thyristor ... designed for industrial and consumer applications such as power supplies, battery chargers, temperature, motor, light and welder controls.
- Economical for a Wide Range of Uses
- High Surge Current — IJSM = 3°0 Amps
- Low Forward "On" Voltage -1.2 V (Typ) @ ITM = 26 Amps
- Practical Level Triggering and Holding Characteristics — 10 mA (Typ) @ TC 2E'C
- Rugged Construction in Either Pressfit, Stud, or Isolated Stud
- Glass Passivsted Junctions for Maximum Reliability MAXIMUM RATINGS Rating Peak Repetitive Off-State Voltage, Note 1 All Types Non-Repetitive Reverse Voltage (Tc - -40 to 100-CI All Types Forward Current RMS Peak Surge Current (One Cycle, 60 Hz, TC - -40 to 100°C) Circuit Fusing (TC = -40 to KWC, t = 1 to 8.3 ms) Peak Gate Power Average Gate Power Peak Forward Gate Current Operating Junction Temperature Range Storage Temperature Range Stud Torque Suffix F A B D M F A B D M Symbol VDRM and VRRM VRSM IT(RMS) 'TSM |2t PGM PGIAVI IGM TJ Tstg Value 100 200 400 600 160 300 500 720 250 260 0.5 -40 to +100 -40 to +125 Unit Volts Volts Amps Amps A2s Watts Watt Amps in. Ib. THERMAL CHARACTERISTICS C230, 231 C230( )3, 231 ( )3 C232, 233 Series SCRs
25 AMPERES RMS
ITO-203) STYLE 1 C232 and C233 Series STYLE 1 C230 and 231 Series STYLE 1 C230I )3andC231( )3 Series Characteristic Thermal Resistance, Junction to Case Pressfit and Stud Isolated Stud Symbol RWC Max 1.16 Unit "C/W Not* 1. VDPM and VRRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for 2<ro or negative gate voltage. Devices ahall not have a positive bias applied to the gate concurrently with a negative potential on the anode. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by N.I Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors