5030 TIME-ELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- RCD 3 mA to 2500 mA, 10 ms to 2000 ms
- Loop 50 mΩ to 1.8 kΩ
- Insulation up to 2 GΩ / 1 kV
- Continuity 0.1 Ω to 10 kΩ
- Regional test sockets
- RS-232 / USB Control
- Fast and intuitive user interface
- PC/laptop control via EasyCal software EasyCal Calibration Software The 5030 can be controlled via Time Electronics EasyCal software to automate the calibration process. This provides increased speed of calibration and consistency of results Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.
Time Electronics Ltd, Unit 5, T O N Business Park, 2-8 Morley Road, T onbridge, Kent, TN9 1RA, United Kingdom T : +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronics.co.uk | www.timeelectronics.com v2c Technical Specifications Loop Function Range / Values Resolution Accuracy Loop Impedance Resistor Values 0.330, 0.150, 0.050 Ω 4 digit ± 0.5 % of displayed value ± 30 mΩ Local Loop Compensation 0 to 9.999 Ω 0.001 Ω ± 0.5 % of value ± 30 mΩ T est Current 30 A max (200 ms) / 50 W max – – RCD Function Range / Values Resolution Accuracy Trip Time 10 to 2000 ms 10 ms ± 0.5 ms ± 1 % with x5 multiplier Current Multipliers x0.5, x1, x2, x5 – – Maximum Current 2500 mA – – Waveforms AC, DC & half wave rectified – – Phase Detection 0° or 180° – – Pre Trigger Delay 0 to 2000 ms 10 ms – Pre Trigger Threshold 0 to 100 % of nominal current 1 % – Insulation Function Range / Values Resolution Accuracy Resistance
1 MΩ to 2000 MΩ 1 MΩ 1 % of value
50 kΩ to 1990 kΩ 50 kΩ 1 % of value T est Voltage Measurement @ 0.5 mA or 1.0 mA Load 50.0 to 99.9 V DC 0.1 V 1 % of reading 100 to 1200 V DC 1 V 1 % of reading Continuity Function Range / Values Resolution Accuracy Resistance 0.1 Ω to 100.0 Ω 0.1 Ω 1 % of value + 20 mΩ 250 Ω, 500 Ω, 1.00 kΩ, 2.50 kΩ, 5.00 kΩ & 10.0 kΩ 3 digit 1 % of value T est Voltage Measurement (input resistance 10 MΩ) 0.0 to 50.0 V DC 0.01 V 0.5 % of range T est Current Measurement (between 1 Ω and 2 Ω) 0 to 400 mA DC 0.1 mA 0.5 % of range Power Dissipation 1 watt maximum – – Voltage Function Range Resolution Accuracy Line Voltage Measurement 100.0 to 260.0 V RMS 0.1 V 0.5 % of reading Line Frequency Measurement 45.00 to 65.00 Hz 0.01 Hz 0.1 % of reading General Specifications Full spec: 23 °C ± 5 °C, Storage: -10 °C to 50 °C. Non operating altitude: 3 to 12 km. 100 to 120 V AC 60 Hz (specify on order). Power consumption 200 W maximum.
Ordering Information
Due to continuous development Time Electronics reserves the right to change specifications without prior notice.