C13032 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
Product Number C13032_BARBARA-WW Family Barbara Type Reflector Color metal Diameter 70 mm Height 44,7 mm Style round Optic Material PC Holder Material Fastening glue Status production ready ROHS Comliant Yes Date Updated 30/12/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector BXRA ES Rectangle 60 deg Very Wide 89 % 1.000 - CLL03x/CLU03x 70 deg Very Wide 88 % 0.800 - CL-L330 55 deg Very Wide 88 % 1.200 - CLU720/721 66 deg Very Wide 81 % 0.870 - CXA2011 60 deg Very Wide 90 % 1.000 - COB 10W/13W/17W/24W 65 deg Very Wide - 0.900 - CXM-14 68 deg Very Wide 80 % 0.820 - STARK SLE PURE G3 LES17 sim: 66 Very Wide - sim: 0.870 - SLE G5 LES15 67 deg Very Wide 80 % 0.840 - May 31st 2017 5:49 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10
24240 SALO, Finland
http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001
25% 50% 75% 100% -60-50-40-30-20-100102030405060 Relative intensity of C13032_BARBARA-WW (COB-10W)
B C A D SCALE 1:1 WEIGHT SHEET SIZE DRAWING TITLE PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Barbara series datasheet INDEX DESCRIPTION MATERIAL COLOUR
1 Barbara reflector PC metal
70 19.22 Front view 44.7 20.55 66.87 Isometric view
NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.