C1250 VECTRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Avionics and Instrumentation Reflow Process Compatible Test Equipment ACMOS, TTL, LVPECL and LVDS Medical Equipment MIL-PRF-55310 Class B Screening (optional) Military Operating Temperature Range (optional)

Vectron International · www.vectron.com v.2005-08-05-05 · page 2 of 4 SEM Vectron International Headquarters

267 Lowell Road

Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC.

100 Watts Street

Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax RF Output Parameter Min Typ Max Units Condition Ordering Code Signal ACMOS RFA Load pF Signal Level (Vol) 0.5 VDC Vs= 5.0V and 15pF load 0.3 VDC Vs=3.3V and 15pF load 0.25 VDC Vs=2.5V and 15pF load Signal Level (Voh) 4.5 VDC Vs= 5.0V and 15pF load 3.0 VDC Vs=3.3V and 15pF load 2.25 VDC Vs=2.5V and 15pF load Rise and fall times for ACMOS (measured 10% to 90%) ns ns ns 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0MHz Duty cycle @ 50% Vs< 15 MHz @ 50% Vs > 15 MHz Signal TTL RFT Load Signal Level (Vol) 0.5 VDC Vs= 5.0V and 15pF load Signal Level (Voh) 4.5 VDC Vs= 5.0V and 15pF load Rise and fall times for TTL (measured 0.8V to 2.0V) ns ns 1.0 to 23.9 MHz 24 to 125 MHz Duty Cycle @ 1.4V < 15 MHz @ 1.4V > 15 MHz Signal LVPECL RFP Load Into Vcc-2V or Thevenin Equivalent Signal Level (Vol) Vs -1.62 VDC -40 +85°C operating temp Signal Level (Voh) Vs- 1.025 VDC -40 +85°C operating temp Rise and fall times (measured @ 20% to 80%) 1000 600 ps ps <100 MHz > 100 MHz Duty cycle LVPECL @ 50% Vdd Jitter (rms) 0.5 ps ps BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz Period Jitter (pk-pk) ps 10,000 Samples - Rising edge Signal LVDS RFL Load 100 140 Between outputs Signal Level (Vol) 1.2 VDC Signal Level (Voh) 1.4 VDC Differential Voltage (Vod) 240 330 460 mVpeak Common Mode (Offset) Voltage (Vos) 1.125 1.2 1.375 V Start-up Time mS Rise and fall times 600 1000 ps measured @ 20% to 80% of Vod Duty cycle @ 50% of Vod Jitter (rms) ps ps BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz Period Jitter (pk-pk) ps 10,000 Samples - Rising edge Additional Parameters Screening Vectron Verification9 V Screening Class B, MIL-PRF-55310, Rev.D B Output Enable6 Logic "0" input = Outputs disabled (Tri-state) Logic "1" or floating input = Outputs enabled) Standard (All outputs) Logic "0" or floating input = Outputs enabled Logic "1" input = Outputs disabled (Tri-state) Custom (Contact factory for availability) Weight < 2 grams Processing & Packing Handling & processing note

Vectron International · www.vectron.com v.2005-08-05-05 · page 3 of 4 SEM Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax Standard Environmentals Parameter Test Condition Vibration MIL-STD-202, Method 204, Condition G (30 G, 10Hz-2000Hz) Shock MIL-STD-202, Method 213, Condition I (100 G, 6ms, Sawtooth) Acceleration MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane) Temperature Cycling MIL-STD-883, Method 1010, Condition B Thermal Shock MIL-STD-883, Method 107, Condition B Solderability MIL-STD-202, Method 208 Leak Test (Fine and Gross) MIL-STD-883, Method 1014, Condition A1 and C1 Absolute Maximum Ratings Parameter Min Typ Max Units Condition Supply voltage (Vs) 7.0 V Vs=5.0VDC 7.0 V Vs=3.3VDC Operable temperature range -55 +125 Storage temperature range -62 +125 Enclosures Type A ACMOS or TTL Type B LVPECL or LVDS Package Codes: Codes Height Codes Height A1 = 4 leads 0.074 ± 0.007 B1 = 6 leads 0.074 ± 0.007 E1 = Enable/Disable pin 1 (1.88 ± 0.178) E1 = Enable/Disable pin 1 (1.88 ± 0.178) X = N/C pin 1 E2 = Enable/Disable pin 2 X = N/C pin 1 and pin 2 T= Tinned J leads 8 T= Tinned J leads 8 X= No Tinning X = No Tinning Pin Connections Pin Connections

1 Enable/Disable or N/C

3 RF Output

4 RF Output

2 Ground (case)

4 Supply Voltage

2 N/C

5 Complementary Output

3 Ground (Case)

6 Supply Voltage

Vectron International · www.vectron.com v.2005-08-05-05 · page 4 of 4 SEM Vectron International Headquarters Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax How to Order this Product: 10 Step 1 Use this worksheet to forward the following information to your factory representative (example follows): Model Stability Code Initial Accuracy Code (if required) Supply Voltage Code RF Output Code Screening Code Package Code Enable/Disable Code Tinning Code C1250 C505 T505 SV033 RFA V T Step 2 The factory representative will then respond with a Vectron Part Number in the following configuration: Model Package Code Dash Dash Number C1250 [Customer Specified Package Code] [Factory Generated 4 digit number] Typical P/N C1250A1-0001 Notes: Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies, RF outputs and supply voltages. Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). Phase noise degrades with increasing output frequency. Subject to technical modification. Contact factory for availability. Contact factory for other options. Overall stabilities do not require an initial accuracy code. Leads tinned IAW Vectron International standard procedure (GR-37409). Vectron Verification IAW Vectron International standard process (HK-69314). Please be sure to specify nominal frequency.