C11 NJSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

nc. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 USA TELEPHONE: (979) 376-2022 (212) 227400B FAX: (973) 37WU60 The Cll Silicon Controlled Rectifier is a three junction semiconductor device for use in tow power switching and control applications requiring blocking voltages up to 600 volts and RMS load currents up to 7.4 amperes.

  • Broad Voltage Range (Up to 600V) • No Gate Bias Required
  • Long Electical Creepage Path • High Gate Sensitivity
  • Over Three Years of Successful Field Experience ©COPPER TERMINAL,ois THICK. TIN PLATED ©BRASS WASHER.O35 THICK NICKEL PLATED ©MICA WASHERS, TWO. 625 O.D., ZO4 I 0,,.DOS THICK 0 TEFLON WASHER..270 O.D. .204I0...05O THICK
  • AVAILABLE UPON REQUEST INSULATING HARDWARE KIT* if © 10-32 STEEL NUT CADMIUM PLATED (D LOCK WASHER, CADMIUM PLATED STEEL I, COMPLCTt THRUM FXTEMD TO WfTMN I-l/l OF HUD. t HMefTCft OP UWDMUKD POKTIOM ,ttO MAI, i. MHUJW omnnwnM <* THOI * CAM « MOM COMefCTIQN. Typ» C11U (2N1770) C11F (2N1771) C11A (2N1772) C11G (2N1773) CUB (2N1774) C11H (2N1775) C11C (2N1776) CUD (2N1777) CUE (2N1778) CUM (2N2619) Minimum Forward Breakover Voltage (VB,,)t Tj = -65 Cto+I25"C

25 Volts*

50 Volts*

100 Volts*

150 Volts*

200 Volts*

250 Volts*

300 Volts*

400 Volts*

500 Volts*

600 Volts*

Voltage (PRV)f Tj = -65°Cto+123°C Traniient Peak Rever«e VoltoBe (Non-recurrent < 5 MilliMc.)t Tj = — 65°Clo+m°C

40 Volts*

75 Volts*

225 Volts*

350 Volts*

720 Volts*

tValues apply for zero or negative gate voltage only. Maximum case to ambient thermal resistance for which maximum PR\\s apply equals 18"C/watt. MAXIMUM ALLOWABLE RATINGS Repetitive Peak Forward Blocking Voltage (PFV) (C11U thru CUD) 480 Volts (CUE and CUM) 720 Volts RMS Forward Current (All conduction angles) 7.4 Amperes Average Forward Current (I,,) 4.7 Amperes* at 60°C Case (Half Wave Rectified) For other operating conditions see Chart 3. „.. _60 Amperes* Peak One Cycle Non-recurrent Surge Current (is,,ri;,,)- Peak Surge Current During Turn-on Time Interval _ I-t (for fusing) Peak Gate Power (p,;) Average Gate Power (P,;) ' Peak Gate Current (in) Peak Gate Voltage (v(;) (Forward and Reverse) Operatirig Temperature Storage Temperature ... Stud Torque 'Indicates data included on JEDEC type number registration. See Chart 7 Calculate from Chart 8

5 Watts*

0.5 Watt*

2.0 Amperes*

10 Volts*

-65°Cto-f-125°C* -eS^to-f-lSO'C* 15 inch-pounds

T«t Peak Reverse and Forward Blocking Current! C11U (2N1770) C11F (2N1771) C11A (2N1772) C11G (2N1773) CUB (2N1774) C11H (2N1775) C11C (2N1776) C11D (2N1777) CUE (2N1778) CUM (2N2619) Full Cycle Avg. Reverse and Forward Blocking Currentf C11U (2N1770) C11F (2N1771) C11A (2N1772) C11G (2N1773) CUB (2N1774) C11H (2N1775) C11C (2N1776) CUD (2N1777) CUE (2N1778) CUM (2N2619) Gate Current to Fire Gate Voltage to Fire Peak Forward Voltage Drop Holding Current Turn-on Time Turn-off Time Thermal Resistance Symbol in and is Il«.U 1 and Is(AV) Ir.f V,;f VK In t, + tr t,,rr 0.,-r Min, — — 0.3* TYP- 4,5 4.5 4.5 4.0 3.0 2.5 1.5 1.0 1.0 1.0 2.3 2.3 2.3 2.0 1.5 1.3 0.8 0.5 0.5 0.5 1.3 0.7 1.6 8.0 1.0 1.5 Max. 9.0 9.0 9.0 8.0 6.0 5.0 4.0 2.0 2.0 2.0 4.5* 4.5* 4.5* 4.0* 3.0* 2.5* 2.0* 1.0* 1.0* 1.0* 30* 2.0* 1.85 3.1 Unit. ma ma ma ma ma ma ma ma ma ma mAdc mAdc mAdc mAdc mAdc mAdc mAdc mAdc mAdc mAdc mAdc mAdc mAdc Vdc Vdc V mAdc Msec iusec "C/Watt Tett Condition! T.i = 125°C, Gate Open VA(- = V.-»= 25 Volts Peak 100 150 200 250 300 400 500 600 C11 SERIES 2IM 1770-78 2N2619 Tr = GO°C, L. = 4.7A, half sine wave 180° Conduction Angle v,,=vrA— 25 Volts Peak 100 150 200 250 300 400 500 600 V.M = 12Vdc, T., = 25°C, Rr. = V 1 9VH/i T fit;0*"' T? V lO\\fAn T lQt\\°n P ; 250 ohms R,. = 250 ohms vAI- - Rated, T., - 125°C, R,. - = 250 ohms T.i = 25°C, it- — 15 a (single sinusoidal pulse, 4 ms wide) T 9t\\°r* i 1fl a v Pa Supply: 7 volt open circuit Msec max. rise time. T 1 9*\\C* i fi a i £ a 25"C ted Gate 20 ohm, 0.1 v,v< (Reapplied) = Rated. Rate of Rise of Reapplied Forward Blocking Voltage = 20 volts per microsecond maximum. Junction to Case, fValues apply for zero or negative gate voltage. Maximum case to ambient thermal resistance for which maximum PRV ratings apply = 18 °C per watt. "Indicates data included on JEDEC type number registration. INSTANTANEOUS FORWARD VOLTAQE DROP-VOLTS 1. MAXIMUM FORWARD CHARACTERISTICS CONDUCTING STATE 2 1 6 a 10 12 INSTANTANEOUS FORWARD VOLTAGE DROP-VOLTS 2. MAXIMUM FORWARD CHARACTERISTICS HIGH CURRENT LEVEL — CONDUCTING STATE